Sistem Clean In Place Pada Tandon Air Dengan Teknologi Internet Of Things
DOI:
https://doi.org/10.22441/jte.2024.v15i3.009Keywords:
Acid, Alkali, Air, Flow, Tandon.Abstract
Air bersih merupakan sumber daya yang sangat penting bagi kehidupan manusia. Air bersih dibutuhkan untuk memenuhi kebutuhan sehari-hari seperti untuk mandi, mencuci, memasak, dan minum. Tandon air dan pompa memang menjadi dua instrumen yang sangat penting dalam jaringan sistem pengadaan air bersih. Tandon air berfungsi sebagai wadah penyimpanan air bersih, baik yang terletak di bawah tanah atau pada rooftop/tower. Tandon air yang tidak dibersihkan secara rutin dapat mengakibatkan masalah kesehatan. Sistem Clean In Place pada Tandon Air Dengan Teknologi Internet Of Things merupakan solusi yang cerdas untuk meningkatkan efektivitas pembersihan tandon air. Tujuan yang ingin dicapai pada penelitian ini adalah Bagaiamana membuat Sistem Clean In Place pada tandon air dengan teknologi Internet Of Things, Bagaimana mengetahui waktu ideal yang dibutuhkan dalam proses sirkulasi chemical dalam pembersihan tandon air dan jalur terhadap hasil swab test, Bagaimana mengetahui waktu ideal yang dibutuhkan dalam proses penetralan air setelah dilakukan sirkulasi chemical. Pada percobaan 9 adalah percobaan yang ideal yaitu dengan flow 15 L/M, Waktu sirkulasi 6 menit menghasilkan nilai swab test dibawah 10 RLU. Pengujian pH dilakukan untuk memastikan tandon air terhindar dari chemical yang menggenang pada tandon, karena jika masih tersisa chemical akan berbahaya bagi kesehatan.
Downloads
References
Septyaningrum, A. E. (2021). Analis Sistem Pengendalian dan Monitoring Tingkat Kekeruhan Tandon Air Berbasis Arduino UNO dan Internet Of Things. JPTM, 26-32.
Rohpandi, D., Mulady, F., & Sambani, E. B. (2021, Oktober). Rancang Bangun Pompa Air Otomatis Dan Sistem Monitoring Kekeruhan Air Berbasis Iot Pada Tandon Air. Sistem Informasi dan Teknologi Informasi, 10, 209-219.
Rahman, F. R., Septiawan, M. R., Amiruddin, Tambi, & Zulkaida, W. O. (2022). Otomasi Proses Pengaturan Kualitas pH dan Kekeruhan Air untuk Water Cooling Furnace. 224-230.
Sidik, M., & Siswanto, E. (2020, Desember). Rancang Bangun Sistem Deteksi dan Monitoring Kekeruhan Air Dengan Microcontroller Arduino Berbasis Internet Of Things. Media Informasi Analisa dan Sistem, 5, 88-93.
Sasmoko, D., Rasminto, H., & Rahmadani, A. (2019). Rancang Bangun Sistem Monitoring Kekeruhan Air Berbasis IoT pada Tandon Air Warga. INFORMATIKA UPGRIS, 5, 25-34.
Thomas, A., & Sathian, C. T. (2014, June). Cleaning In Place (CIP) System in Dairy Plant. Of Environmental Science, 8(6), 41-44.
Khalid, N. I., Aziz, N. A., Nuraini, A. A., Taip, F. S., & Anuar, M. S. (2014). Alkaline Cleaning in Place of Pink Guava Puree Fouling Deposit Using Lab-scale Cleaning Test Rig. Agriculture and Agricultural Science Procedia, 280 – 288.
Husniyah, R., & Prabowo. (2022, Juli). Development of Arduino-Based Flowmeter Sensor Props for Measuring Water Flow in Dynamic Fluid Materials. Pengkajian Ilmu dan Pembelajaran Matematika dan IPA IKIP Mataram, 3, 427-442.
Zhmud, V. A., Kondratiev, N. O., Trubin, V. G., Kuznetsov, K. A., & Dimitrov, L. V. (2018). Application of ultrasonic sensor for measuring distances in robotics. Physics, 1-9.
Aritonang, W., Bangsa, I. A., & Rahmadewi, R. (2021, Januari). Implementasi Sensor Suhu DS18B20 dan Sensor Tekanan MPX5700AP menggunakan Mikrokontroller Arduino Pada Alat Pendeteksi Tingkat Stress. Ilmiah Wahana Pendidikan, 7, 153-160.
Husni, N. L., Rasyad, S., Putra, M. S., Hasan, Y., & Rasyid, J. A. (2019). Pengaplikasian Sensor Warna Pada Navigasi Line Tracking Robot Sampah Berbasis Mikrokontroler. Ampere, 4, 1-14.
Djuredje, R. A., Hermanto, & Himawan, R. (2022, Desember). Development Of Media Based On Codular Applications In Learning Persuasion Text In Class Viii Smp. Pendidikan Bahasa dan Sastra, 10, 32-41.
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
