Analisa AC Power Automatic Switch Module dengan Metode Dual Power PLN dan Panel Surya
DOI:
https://doi.org/10.22441/jte.2024.v15i2.004Keywords:
ATS, Dual Power, PLN, Panel SuryaAbstract
Power outages can cause disruption of service continuity, especially in service activities in the trade, hospitality, hospital, and industrial sectors. Today the distribution of PLN's electrical energy often fails in distribution due to internal and external factors, to meet the need for continuity of electrical energy, other sources of electrical energy are needed so that if there is a power outage from PLN, consumers' needs for electrical energy are not disturbed. These sources of electrical energy are temporary to serve the electrical load in the utilization of PLN's electrical energy as the main energy source. ATS (Automatic Transfer switch) is a tool that functions to move connections between one electric voltage source and another voltage source automatically or can also be called Automatic COS (Change Over Switch), a one-phase ATS by getting more economical and easy results in maintenance. ATS in this tool can work well in the switching process manually or automatically. When PLN has an outage, there is a time delay of ± 7 seconds before the energy from the solar cell starts. This aims to keep the components from being damaged in the event of an outage.Downloads
References
A. Muneer, F. Amjad, M. W. Jabbar, and U. Saleem, “Development of Automatic Switch for Electric Power Transfer,” in Eng. Proc. 2021, 12, 72, MDPI AG, Jan. 2022, pp. 1–5. doi: 10.3390/engproc2021012072.
Q. Lu, Y. Zhanqing, W. Tianyu, C. Zhengyu, L. Bin, and Z. Rong, “Study on the operating characteristics of a compound automatic transfer switch based on forced current commutation,” The Journal of Engineering, vol. 2019, no. 16, pp. 3329–3332, Mar. 2019, doi: 10.1049/joe.2018.8413.
A. Rajagukguk and K. Trisna Rinaldi, “Design of Solar of Cell and PLN Using Automatic Transfer Switch (ATS) for Minimarket Loads in Sorek Satu Area,” International Journal of Electrical, Energy and Power System Engineering, vol. 5, no. 3, pp. 86–92, 2022, [Online]. Available: http://www.ijeepse.ejournal.unri.ac.id
J. Jamaaluddin, S. Dhya Ayuni, and I. A. Sw, “Analysis of the Use of Automatic Change Over Switch for Solar Power and PLN Electricity,” in Procedia Of Social Sciences and Humanities Proceedings of the 1st SENARA 2022, 2022, pp. 910–916.
S. M. P. Pakpahan and A. I. Agung, “Rancang Bangun AMF-ATS Berbasis SIM800L dengan Fungsi Monitoring Status Switching pada Genset,” Jurnal Teknik Elektro, vol. 08, no. 01, pp. 81–89, 2019.
A. Felix Agbetuyi, A. Ajao Adewale, O. J. O, and O. D. S, “Design and Construction of an Automatic Transfer Switch for a Single Phase Power Generator,” Int J Eng Sci, 2011, [Online]. Available: https://www.researchgate.net/publication/312121646
R. H. R. Fora and Sunandar, “Automatic Transfer Switch Panel in PLN Electricity and Power Inverter 2000 Watt,” Journal of Applied Electrical & Science Technology, vol. 02, no. 1, pp. 10–16, 2019.
W. Audia, Yulkifli, Mairizwan, and A. Rinaldi, “Automatic Transfer Switch System Design on Solar Cell-Grid Hybrid Based on Android Application,” Eksakta : Berkala Ilmiah Bidang MIPA, vol. 23, no. 04, pp. 266–283, 2022, doi: 10.24036/eksakta/vol23-iss04/332.
W. Audia, Mairizwan, R. Anshari, and Yulkifli, “Automatic Transfer Switch Solar Cell Inverter System Based on Android Application,” in Journal of Physics: Conference Series, Institute of Physics, 2022. doi: 10.1088/1742-6596/2309/1/012026.
H. T. Wakudkar, P. V Mawale, A. A. Kamble, and S. J. Tikhe, “Automatic Transfer Switch for Power Generator,” International Research Journal of Engineering and Technology, vol. 05, no. 02, pp. 240–241, 2018, [Online]. Available: www.irjet.net
J. O. Olowoleni et al., “Construction and Operation of an Electronic Automatic Transfer Switch (Ats),” Global Journal of Energy Technology Research Updates, vol. 2, pp. 01–05, 2015.
N. Kurniawan, “Electrical Energy Monitoring System and Automatic Transfer Switch (ATS) Controller with the Internet of Things for Solar Power Plants,” Journal of Soft Computing Exploration, vol. 1, no. 1, pp. 16–23, 2020, doi: https://doi.org/10.52465/joscex.v1i1.2.
J. S. Saputro, H. Maghfiroh, F. Adriyanto, M. R. Darmawan, M. H. Ibrahim, and S. Pramono, “Energy Monitoring and Control of Automatic Transfer Switch between Grid and Solar Panel for Home System,” International Journal of Robotics and Control Systems, vol. 3, no. 1, pp. 59–73, 2023, doi: 10.31763/ijrcs.v3i1.843.
A. N. N. Chamim, A. P. Irawan, and R. Syahputra, “Implementation of Automatic Transfer Switch on the Solar Home System at the Goat Farm Houses,” Journal of Electrical Technology UMY (JET-UMY), vol. 4, no. 2, pp. 79–86, 2020.
A. B. Pulungan and J. Sardi, “Pemasangan Sistem Hybrid Sebagai Penggerak Pompa Air,” JTEV (JURNAL TEKNIK ELEKTRO DAN VOKASIONAL), vol. 5, no. 2, pp. 36–45, 2019, [Online]. Available: http://ejournal.unp.ac.id/index.php/jtev/indexJTEV
F. Kasali, J.- Rostand, M. M. Mustapha, I. Adabara, and A. S. Hassan, “Design of an Automatic Transfer Switch for Households Solar PV System,” European Journal of Advances in Engineering and Technology, vol. 6, no. 2, pp. 54–65, 2019.
J. Koko, A. Riza, and U. K. Mohamad Khadik, “Design of solar power plants with hybrid systems,” IOP Conf Ser Mater Sci Eng, vol. 1125 012074, pp. 1–8, May 2021, doi: 10.1088/1757-899x/1125/1/012074.
G. R. Cahyono, A. F. Zulkarnain, A. G. Budianto, A. T. E. Suryo, and Rusilawati, “Application of Automatic Transfer Switch at Solar Power Plant in Langgar Nurul Hikmah North Banjarbaru in Support of Green Energy,” Jurnal Sains Teknologi dalam Pemberdayaan Masyarakat, vol. 4, no. 2, pp. 95–102, 2023.
K. S. Nistane and P. V Raut, “Power Generators using Automatic Transfer Switch,” International Research Journal of Engineering and Technology, vol. 07, no. 05, pp. 112–114, 2020.
G. P. Sulaeman, Ibrahim, and D. B. Santoso, “Analisis Catu Daya No Break System Perangkat Telekomunikasi,” Jambura Journal of Electrical and Electronics Engineering, vol. 3, no. 2, pp. 41–50, 2021.
M. Q. Azeem, H. ur Rehman, S. Ahmed, and A. Khattak, “Design and Analysis of Switching in Automatic Transfer Switch for Load Transfer,” in ICOSST : 2016 International Conference on Open Source Systems and Technologies, Dec. 2016, pp. 129–134.
N. A. Darmanto and B. W. A. Mahardika, “Design and Development of Automatic Transfer Switch System, Energy Saving Emergency Panel,” in 7th International Conference on Information Technology, Computer, and Electrical Engineering, ICITACEE 2020 - Proceedings, Institute of Electrical and Electronics Engineers Inc., Sep. 2020, pp. 300–303. doi: 10.1109/ICITACEE50144.2020.9239160.
E. Susanto, “Automatic Transfer Switch (Suatu Tinjauan),” Jurnal Teknik Elektro, vol. 5, no. 1, pp. 18–21, 2013.
A. Kurniawan, A. Taqwa, and Y. Bow, “PLC Application as an Automatic Transfer Switch for on-grid PV System; Case Study Jakabaring Solar Power Plant Palembang,” in Journal of Physics: Conference Series, Institute of Physics Publishing, Mar. 2019. doi: 10.1088/1742-6596/1167/1/012026.
D. F. Arfianto, D. Fahmi, and D. A. Asfani, “Pemantauan, Proteksi, dan Ekualisasi Baterai Lithium-Ion Tersusun Seri Menggunakan Konverter Buck-Boost dan LC Seri dengan Kontrol Synchronous Phase SHift,” Jurnal Teknik ITS, vol. 5, no. 2, 2016, doi: 10.12962/j23373539.v5i2.16053.
N. Togasaki, T. Yokoshima, Y. Oguma, and T. Osaka, “Prediction of overcharge-induced serious capacity fading in nickel cobalt aluminum oxide lithium-ion batteries using electrochemical impedance spectroscopy,” J Power Sources, vol. 461, no. July 2019, p. 228168, 2020, doi: 10.1016/j.jpowsour.2020.228168.
R. Sreedhar and K. Karunanithi, “Design, simulation analysis of universal battery management system for EV applications,” Mater Today Proc, no. xxxx, 2021, doi: 10.1016/j.matpr.2020.12.136.
M. E. Nurlana, A. Murnomo, and I. A. Abstrak, “Pembuatan Power Supply dengan Tegangan Keluaran Variabel Menggunakan Keypad Berbasis Arduino Uno,” Edu Elektrika Journal, vol. 8, no. 2, pp. 53–59, 2019.
A. H. 3) Borni Florus King 1), Seno Darmawan Panjaitan 2), “SISTEM KONTROL CHARGING DAN DISCHARGING SERTA MONITORING KESEHATAN BATERAI,” Jurusan Teknik Elektro, Fakultas Teknik, Universitas Tanjungpura, 2020.
J. S. Anton Viantika, “PERANCANGAN CHARGING BATERAI PADA SEPEDA LISTRIK FAKULTAS TEKNIK MENGGUNAKAN TENAGA SURYA,” Sigma Teknika, vol. 5, no. 1, pp. 80–88, 2022.
M. Iskandar and B. Minto, “RANCANG BANGUN INVERTER PURE SINE WAVE,” vol. 13, 2021.
A. P. Putra and A. Mulyadi, “Design an Automatic Transfer Switch for Solar Power Plant,” Journal of Engineering Design and Technology, vol. 22, no. 1, pp. 9–12, 2022.
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
