Smart Sistem Untuk Pemantauan Dan Pengisian Pulsa Listrik Pra Bayar Via Smartphone
DOI:
https://doi.org/10.22441/jte.v10i2.003Abstract
Sistem pengisian pulsa listrik digital pra bayar yang ada saat ini mempunyai kelemahan seperti halnya jika kuota energi listrik habis hanya dapat diketahui jika pemilik sedang berada dirumah dengan aktifnya buzzer sebagai alarm. Sedangkan bila pemilik sedang diluar rumah tidak dapat mengetahui karena berada diluar jangkauan suara buzzer. Selain itu pengisian kuota energi harus dilakukan pada kwh meter, sehingga bila rumah sedang ditinggal penghuninya dalam waktu lama maka listrik akan padam sampai dengan penghuni rumah datang dan mengisi ulang. Smart Sistem Pemantauan dan pengisisan pulsa listrik pra bayar via smarthphone yaitu sebuah sistem pemantauan dan pengisian pulsa listrik via smartphone tanpa harus dilakukan pada kwh meter lagi dan tidak membiarkan rumah padam untuk berlama-lama. Selain itu juga dapat membuat sebuah notifikasi jika pulsa listrik (token) akan segera habis atau sisa kuota sudah mendekati batas minimal melalui pembacaan arus pada sensor ACS712 yang diproses dengan microcontroller NodeMCU dan mengirimkan notifikasi ke telepon seluler dalam bentuk aplikasi MIT App Inventor.
Hasil pengujian yang dilakukan adalah pada sistem yang telah dirancang, informasi dan pemantauan dapat dibaca oleh sensor ACS712 dan Firebase sebagai inputan untuk NodeMcu untuk meproses sistem. Dengan kecepatan internet yang dipakai makan sistem ini akan bekerja dengan stabil pada respon dengan rata rata kecepatan respon 2,2 detik.
Downloads
References
Sudimanto, “Pengisian Pulsa (Token) Listrik Menggunakan SMS (Short Messages Service). 2017.
H. Himawan dan T. Adrin, “Rancangan Jaringa Sistem Mobile Pulsa Listrik Pra Bayar”. Universitas Dian Nuswantoro, 2014
S. Wahyuni, I. Ziad, dan Suroso, “Rancang Bangun Alat Monitoring Penggunaan Pulsa Listrik dengan Notif SMS (Short Messages Service). Politeknik Negeri Sriwijaya, 2019
A. Zulpa, “Prototype Monitoring Pengukuran Beban dan Biaya Arus Listrik dengan Microcontroller Arduino pada pelanggan Pasca Bayar Berbasis WEB”. UIN Syarif Hidayatullah, 2015
D. Risqiawati, A. Ghozali dan Z. Sari, “Rancang Bangun Sistem Monitoring Listrik Pra Bayar Menggunakan Arduino UNO”. Universitas Muhammadiyah Malang, 2016
A. Bastiyan dan N. Kamtomi, ”Perancangan Sistem Pengisian PulsaListrik Berbasis Mobile”.Jurnal Mikrokontroler Vol II, No.3 Hal. 3, 2010.
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
