Analisa Gangguan Rele Differential Busbar di GISTET 500 kV Durikosambi Jakarta Barat
DOI:
https://doi.org/10.22441/jte.2020.v11i2.002Keywords:
Busbar, GISTET 500 kV Durikosambi, Relay DifferentialAbstract
Tenaga listrik merupakan salah satu sumber energi yang sangat penting untuk kelangsungan hidup manusia. Keandalan sistem tenaga listrik akan menjadi prioritas utama dalam sistem penyaluran tenaga listrik dari pembangkit menuju konsumen. Gardu induk merupakan salah satu sub sistem penyaluran tenaga listrik dari tegangan ekstra tinggi menuju tegangan rendah yang kemudian disalurkan ke konsumen. Busbar merupakan bagian utama pada instalasi di Gardu Induk yang berfungsi sebagai titik pertemuan peralatan-peralatan listrik lainnya untuk menerima dan menyalurkan tenaga listrik atau daya listrik. Untuk memenuhi keandalan sistem pada Gardu Induk, tentunya pada busbar memiliki pengaman atau sistem proteksi dari gangguan. Rele proteksi busbar bekerja berdasarkan prinsip rele differential dimana membandingkan arus yang masuk dan arus keluar pada CT1 terhadap CT2. Di GISTET 500 kV Durikosambi menggunakan sistem double busbar dengan konfigurasi satu setengah PMT (3 PMT). Gangguan pada GISTET 500 kV Durikosambi terjadi pada saat manuver pemberian tegangan IBT 2 yang terhubung dengan beban sistem 500/150 kV. Gangguan terbaca fasa ke tanah yang mengakibatkan rele differential busbar bekerja. Dari hasil Analisa, rele differential busbar bekerja dikarenakan adanya pembacaan arus yang tidak seimbang sehingga mengakibatkan trip Busbar A yang terhubung dengan IBT 2Downloads
References
PT PLN (Persero), 2014. Pusat Pendidikan dan Pelatihan, Pedoman Supervisi Konstruksi, Jakarta.
PT. PLN, 2014. Buku Pedoman Pemeliharaan Proteksi dan Kontrol Busbar, Badan Penerbit PLN, Jakarta.
B. Pandjaitan, 2013. Praktik-praktik Proteksi Sistem Tenaga Listrik, CV Andi Offset, Yogyakarta.
J. M. T. Manurung, 2009. “Studi Pengaman Busbar 150 kV Pada Gardu Induk Siantan”.
Yusmartato, R. Nasution & Armansyah, 2019. “Menentukan Setting Rele Differential Pada Busbar Di Gardu Induk Paya Pasir Medan”.
PT Grid Solution, 2018. 500/150kV GIS Durikosambi Schematic Diagram 500 kV Protection Panel, Jakarta
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
