PERENCANAAN DAN ANALISA SISTEM SPRINKLER OTOMATIS DAN KEBUTUHAN AIR PEMADAMAN FIRE FIGHTING HOTEL XX
DOI:
https://doi.org/10.22441/jtm.v6i1.1199Abstract
Dalam pembangunan sebuah gedung terdapat suatu utilitas keamanan salah satunya adalah sistem instalasi sprinkler yang dirancang sesuai dengan standar proteksi kebakaran yang disiapkan untuk mencegah, memadamkan dan menanggulangi kebakaran dalam bangunan gedung. Pada perencanaan sistem sprinkler ini bertujuan untuk memahami dan melakukan perhitungan pada kecepatan aliran dan tekanan serta merencanakan kebutuhan air pada pemadaman fire fighting gedung hotel. Penulis melakukan penganalisaan dan perhitungan dengan menentukan discharge coefficient of the sprinkler k-factor pada kecepatan aliran fluida, selanjutnya menggunakan presure loss dari Hazen-Williams dan dilakukan kebutuhan air dengan mengacu pada Azas Bernoulli, yang penulis sebut dengan metode Step by Step. Dari hasil perhitungan ini didapat bahwa hubungan antara kecepatan aliran pada sprinkler otomatis ini dengan pressure loss yang terjadi dipengaruhi oleh area yang direncanakan, diameter pipa yang digunakan serta panjang pipa. Dimana perencanaan ini mengacu pada standar yang berlaku seperti Standar Nasional Indonesia (SNI) dan National Fire Protection Association (NFPA) yang harus dipakai dalam perencanaan siste sprinkler otomatis pada sebuah gedung.Downloads
References
Fleming, P. R. (2007). Automatic Sprinkler System Calculations. National Fire Sprinkler Association. New York, USA: Patterson
Huda, S. (2011). Perancangan Instalasi Pemadam Kebakaran Gedung Kantor Central Park. Universitas Mercu Buana. Jakarta.
Global Asset Protection. (2015). Estimating Fire Protection Water Demands. Hartford. Connecticut 06103. USA: 100 Constitution Plaza.
Global Asset Protection. (2015). Fire Protection Hydraulics. Hartford. Connecticut 06103. USA: 100 Constitution Plaza
[
Global Asset Protection. (2015). Sprinkler System Hydraulics. Hartford. Connecticut 06103. USA: 100 Constitution Plaza.
Johnston, A. (2011). Principles of Hydraulic Analysis for Fire Protection Sprinkler Systems. USA: Autodesk University.
Moinuddin, K., & Thomas, I. (2013). Reliability of Sprinkler System in Australian High Rise Office Buildings. Fire Safety Journal.
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
This work is also licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
