HUBUNGAN PENGETAHUAN SISWA TERHADAP IKLIM KESELAMATAN DAN KESEHATAN KERJA DI RPS TEKNIK PENGELASAN SMKN 1 CIBARUSAH
DOI:
https://doi.org/10.22441/jtm.v11i2.15071Abstract
Penelitian mengenai hubungan pengetahuan siswa terhadap iklim keselamatan dan Kesehatan kerja (K3) di RPS (Ruang Praktik Siswa) Teknik pengelasan SMKN1 cibarusah adalah untuk mengetahui pengetahuan dan kesadaran siswa terhadap K3 sehingga hasilnya dapat menghasilkan data yang dapat menghindari/mengurangi kecelakaan kerja dan diharapkan dapat melakukan penekanan tingkat kecelakaan kerja sampai di titik terkecil mendekati titik nol atau zero accident. Penelitian ini menggunakan metode penelitian kuantitatif deskripsi korelasi. Jumlah siswa untuk penelitian sebagai subjek sebanyak 35 siswa yang terdiri dari kelas X sampai kelas XII dijurusan Teknik Pengelasan SMKN 1 Cibarusah. Teknik pengambilan sampel menggunakan teknik purposive sampling. Instrumen yang diambila adalah pengetahuan keselamatan kerja yang terdiri dari 17 item dengan reliabilitas menggunakan formula Alpha Cronbach sebesar 0,843. Skala iklim keselamatan dan kesehatan kerja yang terdiri dari 16 item dengan reliabilitas menggunakan formula Alpha Cronbach sebesar 0,732.Data hasil penelitian dianalisis menggunakan metode regresi linier berganda. Hasil penelitian dapat disimpulkan bahwa anak kelas X sampai XII rentan terhadap kecelakaan kerja selama melakukan pekerjaan pengelasan yang ini terlihat dari data dimana pemahamansafty procedurebelum diketahui sebahagian besar siswa sehingga pengetahuan tentang keselamatan kerja sejak di bangku SMK tingkat bawah perlu diberikan.Downloads
References
Kusuma, Wardani. 2013. Pengaruh sikap dan Pengetahuan keselamatan kerja dan iklim keselamatan dan kesehatan kerja terhadap perilaku keselamatan pada karyawan produksi pt. semen Indonesia (persero)tbk. Malang
Sofar Silaen, op. cith.
Gantina, Eka, & Karsih, 2011. Teori dan Teknik Konselin, Jakarta Barat: Indeks
International Labour Office Ceneva, 1989. Pencegahan Kecelakaan Kerja. Jakarta: PT.Pustaka Binaman Pressindo
Jhon Ridley, 2006. Ikthisar Kesehatan dan Keselamatan Kerja. Jakarta: Erlangga
Soehatman, R. 2010. Sistem Manajemen Keselamatan Dan Kesehatan Kerja OHSAS 18001. Jakarta : Dian Rakyat .
Soekidjo Notoatmodjo, 2005. Promosi Kesehatan Teori dan Aplikasi. Jakarta: Rineka Cipta
Sugiyono, Bambang, 2003. Program Keselamatan dan Kesehatan Kerja.Semarang:UNDIP.
Syaiful Sagala, 2010. Manajemen Strategik dalam Peningkatan Mutu Pendiidkan, Bandung: CV Alfabeta
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
This work is also licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
