Review of the Utilization of Natural Fibers and Polylactic Acid for Composite Manufacturing

Akhmad Andriyan Nugroho, Muhammad Fitri

Abstract


Composites made from polylactic acid (PLA) and natural fibers offer a sustainable alternative material that is biodegradable and derived from renewable sources. This review journal examines processing techniques, types of material testing, and the enhancement of the capabilities of natural fiber PLA composites to determine their potential applications as a substitute for conventional materials. From existing research journals discussing PLA and Natural Fiber-based composite materials with applications in various sectors, such as automotive, manufacturing and healthcare, it is known that the commonly used processing techniques are hot pressing and vacuum bagging to produce homogeneous fiber distribution and strong matrix-fiber bonds. Material testing is carried out through tensile tests, elastic modulus, and elongation to evaluate the mechanical properties of the composites. The results also show an increase in mechanical ability of 25-35% compared to pure materials, with fiber surface modification that can improve interfacial adhesion. PLA and natural fiber composites provide a sustainable material solution with competitive mechanical performance. Further research is needed to develop environmentally friendly fiber surface modification methods and scalable manufacturing techniques to expand industrial applications.

Keywords


Natural fibers, Polylactic acid, Composites, Sustainable materials

Full Text:

PDF

References


Reference

R. Nurgiansyah and M. Fitri, “The Effect of Rice Husk Powder, Peanut Shell Powder, and Palm Fiber Content on Impact Strength and Microstructure of Resin Matrix Composites,” vol. 20, no. 1, pp. 56–64, 2025.

P. A. Pramana, M. Fitri, A. Hamid, and D. Romahadi, “Effect of Water Hyacinth Fiber Length and Content on the Torsional Strength of Epoxy Resin Composites,” vol. 6, no. 3, pp. 144–151, 2024, doi: 10.22441/ijimeam.v6i3.19701.

M. Fitri and S. Mahzan, “The effect of fibre content, fibre size and alkali treatment to Charpy impact resistance of Oil Palm fibre reinforced composite material,” IOP Conf. Ser. Mater. Sci. Eng., vol. 160, no. 1, 2016, doi: 10.1088/1757-899X/160/1/012030.

M. Fitri, S. Zakaria, D. Feriyanto, and G. Villany Golwa, “Full Factorial and Taguchi Design for the Impact Strength of Oil Palm Fiber Reinforced Composite : A Comparative Study,” Res Mil., vol. 12, no. 5, pp. 1226–1238, 2022, [Online]. Available: https://resmilitaris.net/menu-script/index.php/resmilitaris/article/view/2438/2013.

M. Fitri, T. Susilo, D. Feriyanto, and D. M. Zago, “Effect Of Morphology And Percentage Of Second Phase Content Of Coconut Coir On The Impact Strength Of Epoxy Resin Composites,” They are flighty. Oils, vol. 8, no. 6, pp. 3880–3894, 2021.

M. Fitri, S. Mahzan, D. M. Zago, S. Zakaria, and D. Feriyanto, “Optimization of the second phase morphology and content effect to impact resistance of epoxy resin composite,” BIO Web Conf., vol. 159, 2025, doi: 10.1051/bioconf/202515904006.

and I. W. S. I. G. Sudiarsa, T. G. T. Nindhia, “The Effect of Coconut Fiber Weight Fraction on Tensile and Flexural Strength of Polyester Composites,”J. Ilm. Tech. Design Mek., vol. 7, no. 2018.

M. Fitri and S. Mahzan, “The Regression Models of Impact Strength of Coir Coconut Fiber Reinforced Resin Matrix Composite Materials,” Int. J. Adv. Technol. Mech. Mechatronics Mater., vol. 1, no. 1, pp. 32–38, 2020, doi: 10.37869/ijatec.v1i1.12.

U. N. Surabaya, “Composite Materials and Their Utilization,” 2025, [Online]. Available: https://mesin.ft.unesa.ac.id/post/material-komposit-dan-pemanfaatannya.

M. Yani and B. Suroso, “FT-UMSU 74 Mechanical Properties of Plastic Waste Composites,”J. Engineering Mater. Manufacturing and Energy, vol. 2, no. 1, pp. 74–83, 2019, [Online]. Available: https://creativecommons.org/licenses/by-sa/4.0/.

A. Cikal, J. T. Mesin, U. P. Semarang, G. B. Lantai, K. Jl, and S. Timur, “COCONUT FOR SUSTAINABLE INDUSTRIAL APPLICATIONS,” vol. 9, no. Sens 9, pp. 433–435, 2024.

Andalas University Thesis, “Andalas University Thesis,”Andalas University Thesis, pp. 1–23, 2016.

M. Fitri and S. Mahzan, “Influence of coupling agent and fibre treatment to mechanical properties of oil palm fibre reinforced polymer matrix composite,” J. Mech. Eng., vol. 5, no. Specialissue4, pp. 223–232, 2018.

M. V. Podzorova, I. A. Varyan, N. V. Kiselev, Y. V. Tertyshnaya, and A. V. Khramkova, “Influence of UV irradiation on the degradation of polyethylene-based composites,”E3S Web Conf., vol. 413, 2023, doi: 10.1051/e3sconf/202341302018.

M. Fitri, S. Mahzan, and F. Anggara, “The Mechanical Properties Requirement for Polymer Composite Automotive Parts - A Review,” Int. J. Adv. Technol. Mech. Mechatronics Mater., vol. 1, no. 3, pp. 125–133, 2021, doi: 10.37869/ijatec.v1i3.38.

A. Noviyanto, “the Effect of Polysilazane on the Densification and Mechanical Properties of Sicf/Sic Composites,” Synergy, vol. 24, no. 1, p. 11, 2019, doi: 10.22441/sinergi.2020.1.002.

I. Risyuma and M. Fitri, “Analysis of Oil Absorption and Friction Coefficient of Bamboo Powder, Coconut Powder, Glass Powder, and Copper Powder Composites for Clutch Pads,” Int. J. Innov. Me. Eng. Adv. Mater., vol. 4, no. 2, p. 58, 2023, doi: 10.22441/ijimeam.v4i2.18235.

F. England et al., “Analysis of the effect of glass powder size on the manufacture of motorcycle brake linings with used piston powder as filler,” vol. 3, no. 2, pp. 1–5, 2016.

A. Pandriana, H. Pranoto, and S. Alva, “Review: making brake pad composites from natural fibers,”technol. Me. Eng. Semin., 2024.

O. Rafae Alomar, H. Maher Abd, M. M. Mohamed Salih, and F. Aziz Ali, “Performance analysis of Pelton turbine under different operating conditions: An experimental study,” Ain Shams Eng. J., vol. 13, no. 4, p. 101684, 2022, doi: 10.1016/j.asej.2021.101684.

F. R. Damanik and M. Fitri, “Design Optimization of Composite Resin Pelton Turbine Bucket Using Solidworks,” vol. 12, 2022.

and D. M. Z. M. Fitri, M. D. Heryanto, “AERODYNAMIC ANALYSIS OF FIBERGLASS CAR BODY E-FALCO,” Brawijaya, 2021.

R. H. Setyanto, “Review: Green Composite Manufacturing Techniques and Their Applications,”Performance, vol. 11, no. 1, pp. 9–18, 2012.

M. I. P. Hidayat and P. S. M. M. Yusoff, “Optimizing neural network prediction of composite fatigue life under variable amplitude loading using bayesian regularization,” vol. 10.1201/97, no. material, 2009.

O. Suparno, "Potential and Future of Indonesian Natural Fibers as Raw Materials for Various Industries,"J. Technol. Ind. Pertan., vol. 30, no. 2, pp. 221–227, 2020, doi: 10.24961/j.tek.ind.pert.2020.30.2.221.

M. D. Wibowo et al., “RECENT ADVANCES IN BIODEGRADABLE PACKAGING: USE OF POLY(LACTIC-ACID)-BASED PACKAGING – A SYSTEMATIC REVIEW,” no. 1, pp. 138–146, 2024.

A. Influence et al., Digital Repository University of Jember Jember Digital Repository University of Jember. 2012.

S. Sulardjaka, S. Nugroho, and R. Ismail, “Improving the Strength of Mechanical Properties of Natural Fiber Composites using Water Hyacinth Fiber (Literature Review),”Tek. Vol 41, No. 1 May 2020, 2020, doi: 10.14710/teknik.v41i1.23473.

G. M. Dirga, "The Effect of Adding Banana Stem Fiber to Sugarcane Fiber Composites on Tensile Strength,"FT - Tech. Mesin, vol. 7, no. 2, pp. 0–6, 2018.

A. R. Fauzi et al., “Journal of Mechanical Engineering Analysis of Composite Materials with Natural Fiber Reinforcement and Plastic Waste Using a Rod Deflection Tester Adi Rizki Fauzi et al / Journal of Mechanical Engineering,” vol. 19, no. 3, pp. 375–384, 2024.

R. Ridwan, T. Rihayat, A. Ilmi, and N. Aidy, “Poly Lactic Acid (Pla) Biocomposite Reinforced with Coir (Coconut Fiber): Evaluation of Mechanical Performance and Multifunctional Properties,”J. Science and Technology. Reactions, vol. 19, no. 02, 2021, doi: 10.30811/jstr.v19i02.2485.

J. Caron and J. R. Markusen, Development of Natural Fiber Composite Materials for Sustainable Industrial Applications. 2019.

Parulian Leonard Marpaung, “POLY LACTIC ACID (PLA) BIOCOMPOSITE MATERIALS FOR AUTOMOTIVE INDUSTRY COMPONENTS,”J. Technol. and Manaj., vol. 15, no. polimer, 2017.

M. Rizal, R. A. Wicaksono, and Y. E. Prawatya, “Manufacturing of Biocomposite Electric Car Bumper Reinforced with Random Fibers of Empty Palm Oil Fruit Bunches-Polyester Using the Vacuum Bagging Method,”J. Technol. Engineering Tech. Machine, vol. 4, no. 1, pp. 38–43, 2023.

D. Edbert, N. Siagian, M. Hakiem, S. Putra, and I. Artikel, “NATURAL FIBER AS AN ENVIRONMENTALLY FRIENDLY COMPOSITE MATERIAL,” vol. 5, no. 1, pp. 55–60, 2024.

N. Ophelia, E. Use of Composite Materials from Natural Fibers on Drones, J. Review, I. Putra Jandhana, and G. Royke Deksino, “Exploration of the Use of Composite Materials from Natural Fibers on Drones: Journal Review Exploration of the Use of Composite Materials from Natural Fibers on Drones: Journal Review,”J. Study. Science and Technology of Mechanical Engineering, vol. 9, no. 1, pp. 2541–3562, 2024, doi: 10.32528/jp.v9i1.2033.

S. L. and V.-B. J. Jiménez L1, Mena MJ1, Prendiz J1, “Polylactic Acid (PLA) as a Bioplastic and its Possible Applications in the Food Industry,” 2019, [Online]. Available: https://www.heraldopenaccess.us/openaccess/polylactic-acid-pla-as-a-bioplastic-and-its-possible-applications-in-the-food-industry.

E. Hidayah, “Characteristics of Green Composites Based on Polylactic Acid (PLA) and Hemp Fiber.”Repos. Jember University, 2019, [Online]. Available: https://repository.unej.ac.id/handle/123456789/98010.

W. A. Zulkifli Zulkifli, Ida Bagus Dharmawan, “Analysis of the effect of chemical treatment on fiber on the Charpy impact strength of epoxy matrix coconut fiber composite,” vol. 18, 2020, [Online]. Available: https://e-jurnal.pnl.ac.id/polimesin/article/view/1583.

I. Prabowo and M. Chalid, “Optimization of Mechanical Properties of PLA Biocomposites with Arenga Pinnata Fiber,”J. Sci. Technol. Vis. …, pp. 65–68, 2021, [Online]. Available: https://journal.itera.ac.id/index.php/jstvc/article/view/595%0Ahttps://journal.itera.ac.id/index.php/jstvc/article/download/595/223.

M. S. Ummah, Composite Mechanics and Bio Composites, vol. 11, no. 1. 2019.

Marwanto, "Mechanical Properties of Poly Lactic Acid (PLA) and Cellulose Fiber Based on Oil Palm Empty Fruit Bunches"J. Sustainable Forest, vol. 5, no. 2, pp. 412–417, 2017.

A. Siregar, “Utilization of Natural Fiber (Coconut Fiber) as an Alternative Composite Material for Motorcycle Front Fenders,” pp. 1–51, 2021, [Online]. Available: http://repository.uir.ac.id/id/eprint/8998.

M. W. Susanta, B. D. Cahyo, and L. S. Moonlight, “Tensile Test and Impact Test on Banana Stem Fiber Composites with and Without Alkalization,”Seminar. Nas. Inov. Technol. Aviation, pp. 1–9, 2022.

M. E. Seminar, H. Pranoto, and M. Fitri, “APPLICATION IN RAILWAY,” pp. 10–17, 2024.

I. A.-E. Prof. Dr. Ir. Tresna Priyana Soemardi, S.E., M.Si., “First in Indonesia, Ramie Fiber Base Material for Automotive Interiors,”Open. Tech. Univ. Indonesian., no. PolyLatctic Acid (PLA), 2024, [Online]. Available: https://www.ui.ac.id/pertama-di-indonesia-bahan-dasar-serat-rami-untuk-interior-otomotif/.

Annisa Lesmana, “Enhancing Polymer Performance: The Biochar Revolution in Plant Fiber-Reinforced PLA Composites,” no. Biochar Association, [Online]. Available: https://biochar.id/meningkatkan-kinerja-polimer-revolusi-biochar-dalam-komposit-pla-yang-diperkuat-serat-tumbuhan/.

Prof. Widayani, “Challenges and Current Studies on Natural Fiber Composites,”itb, 2023, [Online]. Available: https://itb.ac.id/berita/orasi-ilmiah-prof-widayani-tantangan-dan-studi-terkini-komposit-berbahan-serat-alami/59719.




DOI: http://dx.doi.org/10.22441/jtm.v15i01.36560

Refbacks

  • There are currently no refbacks.


Copyright (c) 2026 Jurnal Teknik Mesin (Journal Of Mechanical Engineering)

Jurnal Teknik Mesin (JTM)
Program Studi Teknik Mesin, Fakultas Teknik, Universitas Mercu Buana
Jl. Meruya Selatan No. 01, Kembangan, Jakarta Barat 11650, Indonesia
Email: [email protected]
Telp.: 021-5840815/ 021-5840816 (Hunting)
Fax.: 021-5871335

JTM is indexed by the following abstracting and indexing services:

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

View My Stats