Augmented Reality dan Pehitungan Rendemen pada Produksi Kayu Profil Menggunakan Mesin Router

Hermawan Hermawan; Fajar Delli Wihartiko; Yugo Ahmad Abdillah

doi:10.22441/10.22441/format.2022.v11.i1.007

Augmented Reality dan Pehitungan Rendemen pada Produksi Kayu Profil Menggunakan Mesin Router

Hermawan Hermawan, Fajar Delli Wihartiko, Yugo Ahmad Abdillah

Abstract

Salah satu produk olahan kayu yang masih banyak diminati pasar adalah wood profile moulding. Bentuk profil yang tidak mengikuti ruang dasar geometris tertentu dapat dihadirkan melalui Augmented Reality. Pendugaan rendemen produksi kayu profil menjadi kurang akurat dengan bentuknya yang tidak beraturan. Augmented Reality memberikan bentuk nyata dari profil kayu yang akan dibentuk dari pilihan bit router. Augmented Reality dibangun menggunakan penanda (marker) yang diberikan dalam bentuk desain bit router 2D. Aplikasi yang dibuat dengan platform Android bahkan memudahkan pengguna untuk memilih jenis dan spesifikasi bit router, sesuai dengan bentuk profil yang diinginkan. Telah diuji untuk jenis Carbide Cove Router dengan tujuh bit router. Aplikasi dilengkapi dengan perkiraan jumlah profil, volume, hasil produksi, dan limbah kayu yang dihasilkan dari bahan baku kayu yang akan dikerjakan. Percobaan dilakukan pada bahan baku papan berukuran 30x200x2000 mm, menghasilkan jumlah profil cekung yang bervariasi antara 3-5 buah, sesuai dengan ukuran mata bor terluar. Hasil produksi bervariasi dari 42,95 hingga 74,44%. Peningkatan rendemen tersebut sejalan dengan jumlah bilah kayu profil yang diproduksi.

Keywords

Profil Kayu; Augmented Reality; Hasil Produksi; Mesin Router

Full Text:

PDF

References

Ministry of Forestry & Environment (2020) “Ekonomi Sektor Kehutanan Indonesia Berdenyut di Tengah COVID-19”. http://ppid.menlhk.go.id/siaran_pers/ browse/2570. Accessed 21 September 2020.

FAO (2018) The State of the World’s Forests 2018–Forest pathways to sustainable development.Rome,118 p.

Herrera, F. F. (2018). Ecotechnological solutions to satisfy current demands of forest products, a glance beyond the trees. Forest Policy and Economics, 94:27–31.

Jun, J-H., T-W. Chang and S. Jun. (2020). Quality Prediction and Yield Improvement in Process Manufacturing Based on Data Analytics. Processes 2020, 8, 1068: 1-18.

Andriani,S., Kurdiansyah dan Violet. (2018). Produktivitas Dan Rendemen Papan Blok Dari Empulur Kayu Sengon (Paraserianthes falcataria) PT Surya Satrya Timur Banjarmasin. Jurnal Sylva Scienteae Vol. 01 No. 2: 243-250

Darmawan, W., M. Azhari, I. S. Rahayu, D. Nandika, L. Dumasari, I. Malela, and S. Nishio. (2018). The chips generated during up-milling and down-milling of pine wood by helical router bits. J Indian Acad Wood Sci (December 2018) 15(2):172–180

Bangse, K. , A. Wibolo , and I K E H Wiryanta. (2020). Design and fabrication of a CNC router machine for wood engraving. Journal of Physics: Conference Series 1450 (2020) 012094. IOP Publishing. 1-6

Nugroho, A. dan Sujadi. (2019). Pengaruh Penggunaan Mesin CNC Router Terhadap Waktu Standar Pengerjaan Ornamen Desain Interior. Jurnal Rekayasa Sistem Industri Volume 4. No.2: 86-92,

Gupta, D. and P.K. Sahu. (2018). Design Evaluation Using Car Tools For A 3-Axis Vertical Milling Machine For Sculptured Surface Machining. International Journal of Engineering Sciences & Research Technology 7(11):145-152

Mazloomi, M.S. and P.D. Evans. (2021). Shape Optimization of aWooden Baseball Bat Using Parametric

Modeling and Genetic Algorithms. AI 2021, 2, 381–393

Šljivić,M., N. Grujović, A. Pavlović, C. Fragassa, J. Ilić, and M. Topić. (2015). Developing Profiles From Wood-Plastic Composites. Proceed. 12. International Conference on Accomplishmants in Electrical and Mechanical Engineering and Information Technology DEMI 2015

Damiani, L., M. Demartini, G. Guizzi, R. Revetria, and F. Tonelli. (2018). Augmented and virtual reality applications in industrial systems: A qualitative review towards the industry 4.0 era. IFAC Papers On Line 51-11 : 624–630

Fraga-Lamas, P. , T. M. Fernández-Caramés, Ó. Blanco-Novoa, and M. A. Vilar-Montesinos. (2018). A Review on Industrial Augmented Reality Systems for the Industry 4.0 Shipyard. Special Section On Human-Centered Smart Systems And Technologies. IEEE Access VOLUME 6: 13358-13375

De Pace, F., F. Manuri, and A. Sanna. (2018). Augmented Reality in Industry 4.0. American Journal of Computer Science and Information Technology. Vol.6 No.1(17): 1-7.

Bottani, E. and G. Vignali. (2019). Augmented reality technology in the manufacturing industry: A review of the last decade. IISE TRANSACTIONS 2019, VOL. 51, NO. 3: 284–310

Osman, S, D. Nincarean EP, N. A. Omarb, M. R. Mohd Rameli, N. S. A. Alhassora, and T. Gusman. (2020). Using Augmented Reality Application to Reduce Time Completion and Error Rate in PC Assembly. International Journal on Informatics Visualization. VOL 4 (2020) NO 3. 166-171.

Xia, L., J. Lu, Z. Zhang, R. Chen, S. Wang, & H. Zhang. (2019). “Development and Application of Parts Assembly Guidance System Based on Augmented Reality”. In 2019 IEEE 4th Advanced Information Technology, Electronic and Automation Control Conference (IAEAC) (Vol. 1, pp. 1325-1330). IEEE

Alsafouri, S. and S. K. Ayer. (2019). Leveraging Mobile Augmented Reality Devices for Enabling Specific Human Behaviors in Design and Constructability Review. Hindawi Advances in Civil Engineering Volume 2019, Article ID 3951986, 1-11

Martinetti, A. , H. C. Marques , S. Singh and L. van Dongen. (2019). Reflections on the Limited Pervasiveness of Augmented Reality in Industrial Sectors. Appl. Sci. 2019, 9, 3382; doi:10.3390/app9163382. 1-11

Al-Jabari, M.O., T.K. Tamimi, and A.A. N. Ramadan. (2019). Multimedia Software Engineering Methodology: A Systematic Discipline for Developing Integrated Multimedia and Software Products. Software Engineering 8(1): 1-10

Trend routing technology. (2018). Routing and Wood Working Catalogue 2018. www.trend-uk.com. Accessed Nov 25th 2020.

Etonam, A.K., G. Di Gravio, P. W. Kuloba, and J. G. Njiri. (2019). Augmented Reality (AR) Application in Manufacturing Encompassing Quality Control and Maintenance. International Journal of Engineering and Advanced Technology (IJEAT) ISSN: 2249 – 8958, Volume-9 Issue-1, October 2019. 197-204

Nadeau, S and K, Landau. (2018). Utility, Advantages and Challenges of Digital Technologies in the Manufacturing Sector. Ergonomics Int J 2018, 2(6): 000188. 1-15.

Masunuru, G.V. (2020). The Opportunities and Limitations of Human Computer Interaction in Virtual and Augmented Reality. International Journal of Recent Technology and Engineering (IJRTE) ISSN: 2277-3878, Volume-8 Issue-6, March 2020. 4667-4673

Aziz, F.A. , F.Abdullah, and L.L. Win. (2018). Using Marker Based Augmented Reality for Training in Automotive Industry. International Journal of Recent Technology and Engineering (IJRTE) ISSN: 2277-3878, Volume-7 Issue-4S2, December 2018. 118-121

Ahmed, T T.; V.S. Shetty.. R. Samirasimha and SJ. Bedere . (2018). Performance Evaluation of Augmented Reality based 3D Modelling Furniture Application. 2018 International Conference on Advances in Computing, Communications and Informatics (ICACCI) Bangalore. IEEE Conference Publication

Cipresso, R., I.A.C. Giglioli , M. A. Raya and G. Riva. . (2018). The Past, Present, and Future of Virtual and Augmented Reality Research: A Network and Cluster Analysis of the Literature. Front. Psychol. 9:2086. doi: 10.3389/fpsyg.2018.02086. 1-20.

Mohamed Aziyen, M.A. and E. M. Ahmed. (2020). Determinants of Blender 3D (open source) usage in Malaysian animation industry. International Journal of Business Innovation and Research 2020 Vol.22 No.1. 1-22.

Nasir, V and J. Cool. (2018). A review on wood machining: characterization, optimization, and monitoring of the sawing process. Wood Material Science & Engineering, DOI: 10.1080/17480272.2018.1465465: 3-15

Mehta, M., M. Kambli, F. Khan, and P. Raut. (2018). Design and fabrication of multipurpose wood machining device: A Review. International Journal of Scientific & Engineering Research Volume 9, Issue 5: 97-108.

Sriratana, L. (2018). Efficiency improvement of door frame manufacturing process in wood product manufacturing industry. 5th International Conference on Industrial Engineering and Applications (ICIEA). IEEE Conference Publication

Nasir, V. and J. Cool. (2018) . A review on wood machining: characterization, optimization, and monitoring of the sawing process. Wood Material Science & Engineering. 1-16. 10.1080/17480272.2018.1465465.

Li, C.Y. and B.H. Tang. (2019). Research on The Application of AR Technology Based on Unity3D in Education. IOP Conf. Series: Journal of Physics: Conf. Series 1168 (2019) 032045. 1-6

Dianrizkita, Y., H. Seruni, and H. Agung. (2018). Analisa Perbandingan Metode Marker Based Dan Markless Augmented Reality Pada Bangun Ruang. Jurnal Simantec Vol. 6, No. 3 Juni 2018. 121-128

Gao. S., J.I.U. Rubrico, T. Higashi, T. Kobayashi, K. Taneda, and J. Ota. (2019). Efficient Throughput Analysis of Production Lines Based on Modular Queues. IEEE Journals & Magazine. IEEE Access (Volume: 7)

Ul Haq, J., A.J. Qureshi and M. Al-Hussein. (2018). Design of a Saw Cutting Machine for Wood and Aluminum. In Proceedings of the 15th International Conference on Informatics in Control, Automation and Robotics (ICINCO 2018) - Volume 2, pages 456-464 ISBN: 978-989-758-321-6

Corrales, L,C.N., M. P. Lambán, M. E. H. Korner and J. Royo. (2020). Review Overall Equipment Efectiveness: Systematic Literature Review and Overview of Different Approaches. Appl. Sci. 2020, 10, 6469. 1-20.

Daryanto dan H.Tarno. (2019). Alat Pertukangan Kayu. Penerbit Gaya Media, Jakarta.

Garner, J.W. (2020). Managing Production Yields and Rework through Feedback on Speed, Quality, and Quantity. Production and Operation Management. Vol 29 Issue 9. 2182-2209.

Basri,E., K Yuniarti, and Saefudin. (2019). Basic properties and potential uses of 35 wood species from moluccas, Indonesia. IOP Conf. Series: Earth and Environmental Science 399 (2019) 012105. 1-9.

Schober, A. , N. Šimunović, A. Darabant and T. Stern. (2018). Identifying sustainable forest management research narratives: a text mining approach, Journal of Sustainable Forestry, 37:6, 537-554, DOI: 10.1080/10549811.2018.1437451

DOI: http://dx.doi.org/10.22441/10.22441/format.2022.v11.i1.007

Refbacks

There are currently no refbacks.

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Format : Jurnal Ilmiah Teknik Informatika
Fakultas Ilmu Komputer Universitas Mercu Buana
Jl. Raya Meruya Selatan, Kembangan, Jakarta 11650
Tlp./Fax: +62215840816
http://publikasi.mercubuana.ac.id/index.php/format