A Systematic Literature Review of Implementation Quality Control Circle in Manufacturing and Services Industries

Indra Maulana Fahturizal

Abstract


A quality control circle (QCC) is a group of workers who do the same or similar work, who meet regularly to identify, analyze, and solve work-related problems. This paper is a literature review on the role of QCC in enhancing work safety in the manufacturing and services industry. This paper explores how quality control circles (QCC) enhance work safety in a firm manufacturing environment. The method used is reviewing inquiry papers that use QCC consistently. The findings of this study can be considered as a roadmap for the successful implementation of QCC in all industries. The results obtained contribute to advances on QCC research for identifying that the concepts sustainable of quality manufacturing and service industries can enable quality to have positive impacts on all the sustainability dimensions in an integrated way, and also supporting the implementation of the quality plan in the following aspects: continues improvement; quality management; management improvement. In essence, these research results will help management make crucial decisions and resource allocations required to make the QCC implementation a succes.

Keywords


Quality; Industry; Manufacturing; Services; QCC

Full Text:

PDF

References


Adisuputra, A. (2019). Implementation of Total Quality Control Products at PT. XYZ. JEM Jurnal Ekonomi dan Manajemen, 5(1), 179-188. http://www.stiepertiba.ac.id/ojs/index.php/jem/article/view/72

Aroemsari, R. (2011). Pendektan Gugus Kendali Mutu dalam Pengendalian Kualitas Produk pada IKM Cendera Mata Malang. urnal Bisnis Indonesia . 2(1), 50-59. http://eprints.upnjatim.ac.id/6436/1/Jurnal_Bisnis_Indonesia__April_2011_e.pdf

Bachtiar, N., Parwati, C. I., & Susetyo, J. (2013). Penerapan Quality Control Circle Pada Proses Finishing Dan Assy Part Duct Air Intake Guna Meminimasi Biaya Produksi. Jurnal Rekavasi, 1(1), 46-52. https://ejournal.akprind.ac.id/index.php/rekavasi/article/view/1854

Beatrix, M. E., & Triana, N. E. (2019). Improvement Bonding Quality of Shoe Using Quality Control Circle. Sinergi, 23(2), 123. https://doi.org/10.22441/sinergi.2019.2.005

Dharsono, W. W. (2017). Penerapan Quality Control Circle Pada Proses Produksi Wafer Guna Mengurangi Cacat Produksi (Studi Kasus di PT XYZ Jakarta). Jurnal Fateksa, 2(1), 31–39. https://uswim.e-journal.id/fateksa/article/view/40

Fadly, M., & Yulhendra, D. (2019). Optimalisasi Peralatan Tambang Komatsu HD 785 dan Caterpillar 6030 BH Menggunakan Metode Quality Control Circle Untuk Memenuhi Target Produksi Batu Gamping Pada PT. Semen Padang (Persero) Tbk. Bina Tambang, 4(3), 340-351. http://ejournal.unp.ac.id/index.php/mining/article/view/105790

Goyena, R., & Fallis, A. . (2019). Analisis Quality Control Terhadap Tingkat Kerusakan Produk Pada Pt. Van Glass Surabaya. Journal of Chemical Information and Modeling, 53(9), 1689–1699. https://doi.org/10.1017/CBO9781107415324.004

Henny, H., Agnia, N., & Hardianto, H. (2019). Analysis Quality Control of Carded and Combed Yarns Using Six Sigma Method. IOP Conference Series: Materials Science and Engineering, 662(6). https://doi.org/10.1088/1757-899X/662/6/062008

Hernadewita, H., Herdiawan, D., Afriyuddin, A., & Hermiyetti, H. (2019). Implementation of the quality control circle for improvement of painting production in PT QWE. Journal of Applied Research on Industrial Engineering, 6(1), 16-25. https://doi.org/10.22105/jarie.2019.169238.1074

Hipni, A., Sitanggang, J. S. H. P., & Rijadi, R. M. S. (2019). Implementation of Quality Control Bulletin in Marketing Division in Achieving Targets ( Case Study at PT KMI ). International Journal of Research in Engineering, Science and Management, 2(1), 177-184. https://www.ijresm.com/Vol.2_2019/Vol2_Iss1_January19/IJRESM_V2_I1_41.pdf

Insani, P. R. (2017). Efektivitas Program Training Gugus Kendali Mutu (GKM) Terhadap Kinerja Karyawan di Hotel Grand Royal Panghegar Bandung. Jurnal Manajemen Resort dan Leisure, 14(1), 63-70. https://ejournal.upi.edu/index.php/jurel/article/view/8467

Kartika, H. (2017). Perbaikan Kualitas Dengan Menggunakan Gugus Kendali Mutu. Jurnal Ilmu Teknik Dan Komputer, 1(1), 57–65. https://publikasi.mercubuana.ac.id/index.php/jitkom/article/view/2412

Kartika, H., Titiaizzati, D. J. & Junaedi, D. (2019). Analysis of Quality Improvement of Herbal Medicine Products from Microbial Contaminants Using the PDCA Method with the QCC Approach. International Journal of Science and Research (IJSR), 8(9), 291–295. https://www.ijsr.net/get_abstract.php?paper_id=22051903

Maharani, C. (2009). Sistem Manajemen Mutu Iso 9000 sebagai Alat Peningkatan Kualitas Organisasi Pelayanan Kesehatan. KEMAS: Jurnal Kesehatan Masyarakat, 5(1), 40–47. https://journal.unnes.ac.id/nju/index.php/kemas/article/view/1859

Muhsin, A., & Budaya, P. W. (2019). Analysis of Employees’ Workload Quality Control. Russian Journal of Agricultural and Socio-Economic Sciences, 89(5), 176–180. https://doi.org/10.18551/rjoas.2019-05.21

Nasution, A. Y., Yulianto, S., & Ikhsan, N. (2018). Implementasi Metode Quality Control Circle untuk Peningkatan Kapasitas Produksi Propeller Shaft di PT XYZ. Jurnal Mesin Teknologi, 12(1), 33–39. https://jurnal.umj.ac.id/index.php/sintek/article/view/2643

Prasetiyo, B., & Tauhid, R. S. (2019). Penerapan Budaya Kerja Kaizen Di Pt X Kabupaten Bandung Barat. At-Tadbir : Jurnal Ilmiah Manajemen, 3(2), 132–146. https://doi.org/10.31602/atd.v3i2.2079

Rahmayani, L., & Haryanto, H. (2020). Rancang Bangun Aplikasi Monitoring Laporan Quality Control Dan Defective Produksi Sepatu Berbasis Web (Studi Pada Pt. Panarub Industry). Jutis (Jurnal Teknik Informatika), 6(2), 76–81. https://doi.org/10.33592/JUTIS.VOL6.ISS2.132

Riadi, S., & Haryadi. (2020). Pengendalian Jumlah Cacat Produk pada Proses Cutting dengan Metode Quality Control Circle (QCC) Pada PT. Toyota Boshoku Indonesia (TBINA). Journal Industrial Manufacturing, 5(1), 57-70. http://jurnal.umt.ac.id/index.php/jim/article/view/2433

Simanjuntak, L. (2014). Hubungan Gugus Kendali Mutu Dengan Kinerja Pegawai Pada Organisasi Publik (Studi Pada RSUD Dr. Saiful Anwar Malang). Jurnal Administrasi Publik, 2(1), 83-88. http://administrasipublik.studentjournal.ub.ac.id/index.php/jap/article/view/341

Suhaimi, M. F. M., & Salleh, N. A. M. (2018). A case study on the improvement of productivity and efficiency of a quality control line for a cutting tool manufacturer. Journal of Mechanical Engineering, 5(1), 222–239. http://ir.uitm.edu.my/id/eprint/36312/

Sumarta, F., & Anaperta, Y. M. (2020). Optimalisasi Produktivitas Overburden Menggunakan Metode Quality Control Circle (QCC) Untuk Evaluasi Ketidaktercapaian Target Produksi Bulan Desember Tahun 2019 Pada PT. Triaryani Kabupaten Musi Rawas Utara, Sumatera Selatan. Bina Tambang, 5(3), 123-132. http://ejournal.unp.ac.id/index.php/mining/article/view/109135

Supriatin. (2018). Pengaruh Gugus Kendali Mutu (GKM) dan Budaya Kerja Terhadap Kinerja. Widya Cipta, II(1), 111–117. http://ejournal.bsi.ac.id/ejurnal/index.php/widyacipta/article/download/2995/2042

Suripatty, P. I., Dharsono, W. W., & Suryadi, S. (2019). Mengurangi Down Time Mesin Filling Pada Produksi Minuman Botol Dengan Menggunakan Metode Quality Control Circle Di PT XYZ. Jurnal FATEKSA: Jurnal Teknologi dan Rekayasa, 4(1), 19-26. https://uswim.e-journal.id/fateksa/article/view/169

Syobir, A., & Aulawi, H. (2016). Identifikasi Penyebab Kecacatan Pada Proses Pembuatan Alas Sandal di Pt.Mandala Logam. Jurnal Kalibrasi, 14(1), 87–93. https://jurnal.sttgarut.ac.id/index.php/kalibrasi/article/view/394

Tobergte, D. R., & Curtis, S. (2013). Organizational Learning Review?Applications of Quality Control Circle Method in Hospitals in Taiwan. Journal of Chemical Information and Modeling, 53(9), 1689–1699. https://eservice.oit.edu.tw/fund/96/file/96_4_0177.pdf

Utama, A. Y., Supriyatna, H., Dimas, R., & Kusuma, P. (2020). Quality Control Analysis of Candy Wrapping Process Using the QCC (Quality Control Circle) Method in the Candy Industry Indonesian. International Journal of Innovative Science and Research Technology, 5(1), 297–309. https://ijisrt.com/assets/upload/files/IJISRT20JAN284.pdf

Vanichchinchai, A. (2017). Life Cycle of Productivity Improvement Activity. Srinakharinwirot Engineering Journal, 12(1), 154–162. http://ejournals.swu.ac.th/index.php/SwuENGj/article/view/8958

Vanichchinchai, A., & Duantrakoonsil, W. (2018). Quality improvement of printed circuit board: A case study of copper in hole. Science, Engineering and Health Studies, 12(2), 77–84. https://doi.org/10.14456/sehs.2018.9

Wibowo, A. D., Wisnubroto, P., & Parwati, C. I. (2016). Analisis Pengendalian Kualitas Melalui Konsep Gugus Kendali Mutu dengan Seven Tools untuk Mengurangi Produk Rusak pada PT. Mitra Rekatama Mandiri. Jurnal Rekavasi, 4(2), 60-66. https://ejournal.akprind.ac.id/index.php/rekavasi/article/view/344




DOI: http://dx.doi.org/10.22441/ijiem.v1i3.10232

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

IJIEM - Indonesian Journal of Industrial Engineering & Management
Program Pascasarjana Magister Teknik Industri Universitas Mercu Buana
Kampus Menteng - Gedung Tedja Buana, Floor 4th  
Jl. Menteng Raya No. 29  Jakarta Pusat- Indonesia
Tlp.: +62 21 31935454 Fax: +62  21 31934474
http://publikasi.mercubuana.ac.id/index.php/ijiem

Email:  [email protected]

 

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

 

Web Analytics Made Easy - Statcounter View My Stats

The journal is indexed by: