Email this article 1.png){kind=logo}
.png)
.png)
.png)
Identification of Waste Supply Chain Flow to Improve Performance
Abstract
Semarang city has the amount of waste that piled up in the Landfill as much as 850 tons/day with the amount of unmanaged waste as is 100 tons/day. This phenomenon needs to be identified and evaluated for the flow of waste disposal from upstream to downstream. Therefore, the purpose of this study is to identify the flow of the waste supply chain and simulate it to determine the performance of waste handling in an area. The research method begins with a supply chain questionnaire which will then be statistically tested to be used as input for supply chain flow generation and simulation using Arena software. Based on the identification of the supply chain, the flow of the waste supply chain in the Wonosari area of Semarang is from households to the garbage dump to be taken to the landfill as far as 10 km. From the landfill, it is further processed into a selling value product. In this study, waste from the landfill is also the input material for the paving block production workshop (WPBP FT) at the Faculty of Engineering, Dian Nuswantoro University. Plastic waste will be used as a mixed material for making paving blocks. The supply chain simulation results using Arena show that the performance is good.
Keywords
Full Text:
PDFReferences
Abida, I, T and Oke, S.A. (2022). The Application of Taguchi WSM, Taguchi WPM and Taguchi WASPAS Multicriteria Method to Optimize Downtime in Production Process, Industrial Journal of Industrial Engineering and Management. 3 (1), pp.1-13. http://dx.doi.org/10.22441/ijiem.v3i1
Abida, I, T and Oke, S.A. (2022). Fuzzy Analitic Hiererachy Process and Markov Chain-WSM/WPM/WAPAS Approached to Solving the Surface Royghness Problem in Boring Steel 15 2062 GR E250 Plates on CNC Machines, Industrial Journal of Industrial Engineering and Management. 3 (1), pp.47-71. http://dx.doi.org/10.22441/ijiem.v3i1
Box, G.E., Hunter, J.S., Hunter, W.G., 2005. Statistics for Experimenters: Design, Innovation and Discovery. 2nd Edition. USA: John Wiley & Sons, Inc
DLH CITY OF SEMARANG. (2019). Semarang City Waste Production. Retrieved from the Semarang City Environmental Service: htGarbage Dump://dlh.semarangkota.go.id/berita /
Ha, B.C., Lim, S.Y., and Le, C,. (2001). Impact of Organization Internal Green Supply Chain Management on Customer’s Purchasing Behaviour for Personal Care Products. Operation and Supply ChainManagement, 14 (3), pp.338-350.
Hair, J.F., Black, B.C., Babin, B.J., and Anderson, R.E, 2010. Multivariate Data Analysis: A Global Persective (7th ed.), Person, pp.133-147
Herart, S,. and Chong, S.C. (2001). Key Component and Critical Success Factors for Project management Success: A Literature Review. Operation and Supply ChainManagement, 14 (3), pp.431-443.
Khentout , A., Kezzar, M, Khochemane, L., 2019. Taguchi Optimization and Experimental Investigation of the Penetration Rate of Compact Polycrystalline Diamond Drilling Bits in Calcareous Rocks. International JournaI of Technology, Volume 10(2), pp. 225–235
Montgomery, D.C., 2001. Design and Analysis of Experiments. 5th Edition. USA: John Wiley & Sons, Inc
National Waste Management Information System. (2018). Waste Management Data. Retrieved from SIPSN (National Waste Management Information System): http://sipsn.menlhk.go.id/?q=3a-data-umum
Okaminiwei, L and Oke, S.A. (2020). Optimization of Maintenance Downtime for Handling equipment in a Container Terminal using Taguchi Scheme, Taguchi Pareto Methods and Taguchi ABC Method, Industrial Journal of Industrial Engineering and Management. 1 (2), pp.69-90. http://dx.doi.org/10.22441/ijiem.v1i2
Orenstein, P., and Tang, H., (2001). Identifying the Relation between Supply Chain Networks Structure and Its Overall Finacial Performance. Operation and Supply ChainManagement, 14 (4), pp.399-409.
Research and Development Agency of the Ministry of Home Affairs. (2018). Research: 24 Percent of Waste in Indonesia is Still Unmanaged. Retrieved from the Ministry of Home Affairs Research and Development Agency: http://litbang.kemendagri.go.id/website/riset-24-persen-sampah-di-indonesia-masih-tak-terkelola/
Setyaningrum, R., (2020). Simulation and modeling of waste management Flow become catfish feed. TekInfo, 8. Pp.34-44. htGarbage Dump://doi.org/10.31001/tekinfo.v8i2.800.
Setyaningrum, R., Subagyo, and Wijaya, A.R., 2020, A mathematichal model of Factors Driving Product Success in an Indonesian Market Using Design Experiment, International Journal of Technology, 11 (2), pp.322-332. htGarbage Dump://doi.org/10.14716/ijtech.v11i2.3428 .
DOI: http://dx.doi.org/10.22441/ijiem.v3i2.14929
Refbacks
- There are currently no refbacks.
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
IJIEM - Indonesian Journal of Industrial Engineering & Management
Program Pascasarjana Magister Teknik Industri Universitas Mercu Buana
Kampus Menteng - Gedung Tedja Buana, Floor 4th
Jl. Menteng Raya No. 29 Jakarta Pusat- Indonesia
Tlp.: +62 21 31935454 Fax: +62 21 31934474
http://publikasi.mercubuana.ac.id/index.php/ijiem
Email: [email protected]
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
The journal is indexed by:
