Analysis of BTA16 CNC Machine Performance Improvement with Total Productive Maintenance Approach

Erik Odi Wijaya, Welly Atikno, Indra Setiawan, Rendy Susanto, Hibarkah Kurnia

Abstract


Machinery or production equipment was the most important part of a production system. Machines need effective and efficient maintenance to be able to guarantee and support the production process to operate properly. The gas filter industry is an industry that produces air and gas filters. The gas filter industry has many production machines, one of which is CNC BTA16. This machine often has problems such as downtime that interfere with smooth production. The purpose of this study was to determine the problems in the CNC BTA16 production machine and provide recommendations for improvements to improve machine performance. The approach used is Total Productive Maintenance. Problem analysis was carried out through Focus Group Discussions with experts. The results showed that the cause of the engine is not optimal comes from abnormal heat in the gearbox on the engine spindle component caused by operator error when inputting data. The results of the calculation of the OEE value on the BTA16 CNC machine during the January – December 2021 period, the average OEE value was 73%. Suggested improvements are to make a special schedule for maintenance, check all speeches, and conduct training for employees to improve knowledge and skills.

Full Text:

PDF

References


Agung, F. Y., & Siahaan, A. (2020). Overall Equipment Effectiveness (OEE) Through Total Productive Maintenance (TPM) Practices: a Case Study in Chemical Industry. Emerging Markets : Business and Management Studies Journal, 7(1), 23–36. https://doi.org/10.33555/ijembm.v7i1.124

Candra, N. E., Susilawati, A., Herisiswanto, & Setiady, W. (2017). Implementation of Total Productive Maintenance (TPM) to Improve Sheeter Machine Performance. MATEC Web of Conferences, 135, 1–11. https://doi.org/10.1051/matecconf/201713500028

Dewi, S., Alhilman, J., & Atmaji, F. T. D. (2020). Evaluation of Effectiveness and Cost of Machine Losses using Overall Equipment Effectiveness (OEE) and Overall Equipment Cost Loss (OECL) Methods, a case study on Toshiba CNC Machine. IOP Conference Series: Materials Science and Engineering, 847(1). https://doi.org/10.1088/1757-899X/847/1/012020

Hendra, Setiawan, I., Hernadewita, & Hermiyetti. (2021). Evaluation of Product Quality Improvement Against Waste in the Electronic Musical Instrument Industry. Jurnal Ilmiah Teknik Elektro Komputer Dan Informatika, 7(3), 402–411. https://doi.org/10.26555/jiteki.v7i3.21904

Hernadewita, H., Rochmad, I., Hendra, H., Hermiyetti, H., & Yuliani, E. N. S. (2019). An analysis of the implementation of the Taguchi method to improve the production of pulp on hydra pulper milling. International Journal of Production Management and Engineering, 7(2), 125. https://doi.org/10.4995/ijpme.2019.10163

Kurnia, H., Jaqin, C., & Purba, H. H. (2022). The PDCA Approach with OEE Methods for Increasing Productivity in the Garment Industry. Jurnal Ilmiah Teknik Industri : Jurnal Keilmuan Teknik Dan Manajemen Industri, 10(1), 57–68. https://doi.org/10.24912/jitiuntar.v10i1.15430

Kurnia, H., Jaqin, C., Purba, H. H., & Setiawan, I. (2021). Implementation of Six Sigma in the DMAIC Approach for Quality Improvement in the Knitting Socks Industry. Tekstilvemuhendis, 28(124), 269–278. https://doi.org/10.7216/1300759920212812403

Manurung, H., Fahri, A., Purba, H. H., & Kurnia, H. (2021). Accidence Analysis Work with Failure Mode and Effect Analysis Method at Coating Service Industry in Indonesia. Specktrum Industry Journal, 19(2), 135–144. https://doi.org/10.12928/si.v19i2.20585

Mkalaf, K. A. (2020). Total Productive Maintenance: A Safety Approach to Optimize the Anesthesia Device Outcomes. ICITM 2020 - 2020 9th International Conference on Industrial Technology and Management, 122–126. https://doi.org/10.1109/ICITM48982.2020.9080374

Nallusamy, S. (2016). Enhancement of productivity and efficiency of CNC machines in a small-scale industry using total productive maintenance. International Journal of Engineering Research in Africa, 25(August), 119–126. https://doi.org/10.4028/www.scientific.net/JERA.25.119

Nurprihatin, F., Angely, M., & Tannady, H. (2019). Total productive maintenance policy to increase effectiveness and maintenance performance using overall equipment effectiveness. Journal of Applied Research on Industrial Engineering, 6(3), 184–199. https://doi.org/10.22105/jarie.2019.199037.1104

Perdana, S., & Santoso, D. (2019). Implementation of repairing production machine productivity of spare parts speaker based on OEE value achievement. Journal of Applied Research on Industrial Engineering, 6(1), 26–32. https://doi.org/10.22105/JARIE.2019.169386.1075

Prabowo, H. A., Suprapto, Y. B., & Farida, F. (2018). The Evaluation of Eight Pillars Totals Productive Maintenance (TPM) Implementation and Their Impact on Overall Equipment Effectiveness (OEE) and Waste. Sinergi, 22(1), 13–18. https://doi.org/10.22441/sinergi.2018.1.003

Purba, H. H., Wijayanto, E., & Aristiara, N. (2018). Analysis of Overall Equipment Effectiveness (OEE) with Total Productive Maintenance Method on Jig Cutting : A Case Study in Manufacturing Industry. Journal of Scientific and Engineering Research, 5(7), 397–406.

Saleem, F., Nisar, S., Khan, M. A., Khan, S. Z., & Sheikh, M. A. (2017). Overall equipment effectiveness of tire curing press: A case study. Journal of Quality in Maintenance Engineering, 23(1), 39–56. https://doi.org/10.1108/JQME-06-2015-0021

Sen, R. S., Majumdar, G., & Nallusamy, S. (2019). Enhancement of overall equipment effectiveness through the implementation of total productive maintenance. Proceedings of the International Conference on Industrial Engineering and Operations Management, July, 475–484.

Setiawan, I. (2021). Integration of Total Productive Maintenance and Industry 4.0 to increase the productivity of NC Bore machines in the Musical Instrument Industry. Proceedings of the 11th Annual International Conference on Industrial Engineering and Operations Management Singapore, 4701–4711.

Setiawan, S. (2021). A Systematic Literature Review of Total Productive Maintenance On Industries. Performa: Media Ilmiah Teknik Industri, 20(2), 97. https://doi.org/10.20961/performa.20.2.50087

Sjarifudin, D., Kurnia, H., Purba, H. H., & Jaqin, C. (2022). Implementation of the six sigma approach for increasing the quality of formal men’s jackets in the garment industry. Jurnal Sistem Dan Manajemen Industri, 6(1), 33–44. https://doi.org/https://doi.org/10.30656/jsmi.v6i1.4359

Stamatis, D. H. (1995). Failure Mode and Effect Analysis FMEA from Theory to Execution. ASQC Quality Press.

Sukma, D. I., Prabowo, H. A., Setiawan, I., Kurnia, H., & Maulana, I. (2022). Implementation of Total Productive Maintenance to Improve Overall Equipment Effectiveness of Linear Accelerator Synergy Platform Cancer Therapy. International Journal of Engineering, 35(7), 1246–1256. https://doi.org/10.5829/ije.2022.35.07a.04

Sukma, D. I., Setiawan, I., & Purba, H. H. (2021). A Systematic Literature Review of Overall Equipment Effectiveness Implementation in Asia. Journal of Industrial & Quality Engineering, 9(1), 109–117. https://doi.org/10.34010/iqe.v9i1.4015

Thorat, R., & Mahesha, G. T. (2020). Improvement in productivity through TPM Implementation. Materials Today: Proceedings, 24, 1508–1517. https://doi.org/10.1016/j.matpr.2020.04.470

Zuniawan, A. (2020). A Systematic Literature Review of Failure Mode and Effect Analysis (FMEA) Implementation in Industries. IJIEM (Indonesian Journal of Industrial Engineering & Management), 1(2), 59–68.




DOI: http://dx.doi.org/10.22441/ijiem.v3i3.15770

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

IJIEM - Indonesian Journal of Industrial Engineering & Management
Program Pascasarjana Magister Teknik Industri Universitas Mercu Buana
Kampus Menteng - Gedung Tedja Buana, Floor 4th  
Jl. Menteng Raya No. 29  Jakarta Pusat- Indonesia
Tlp.: +62 21 31935454 Fax: +62  21 31934474
http://publikasi.mercubuana.ac.id/index.php/ijiem

Email:  [email protected]

 

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

 

Web Analytics Made Easy - Statcounter View My Stats

The journal is indexed by: