Optimization of Production Process by Applying Theory of Constraint (TOC) at CV. Wijaya Mandiri Label

Al Aileen Agraprana, Dwi Sukma Donoriyanto

Abstract


CV. Wijaya Mandiri Label is a company engaged in the printing industry sector located in Sidoarjo which provides printing services inside and outside Sidoarjo. In the production process, problems arise after several years of operation at work stations that cause bottlenecks in the production capacity of bontax and OPP sticker printing, thus hindering the production process to run optimally. This resulted in an inefficient sticker production process in meeting targets that made throughput not optimal. To overcome these problems, researchers conducted research that explored the use of Theory of Constraints (TOC) and supporting methods, namely linear programming, to optimize the company's production process and analyze data on working hours and product production demand. From the results of the research, it was concluded that the company experienced Capacity Constraints which caused bottlenecks at the fourth work station in the last six months. After exploiting the constraints on the bottleneck workstation, throughput is obtained using a linear programming calculation formulation with the results of x1= 0 and x2 = 3,948.47 amounting to IDR16,781,000 in WinQSB software. The final stage of constraint elevation is carried out by allocating operators to bottleneck work stations and obtaining an increase in throughput of IDR6,322,300 or a percentage increase of 27.4% using WinQSB software.

Keywords


Bottleneck; Capacity constraint; Linear programming; Optimization; Theory of constraint

Full Text:

PDF

References


Adhiputra, R. F. (2021). Optimalisasi kapasitas produksi produk PDS Fender pada PT Arkha Jayanti Persada dengan theory of constraints menggunakan Lindo dan PomQm. Journal Industrial Servicess, 7(1), 83. https://doi.org/10.36055/jiss.v7i1.12049

Aini, S., Jamiluddin Fikri, A., Septiani Sukandar, R. (2021). Optimalisasi Keuntungan Produksi Makanan Menggunakan Pemrograman Linear Melalui Metode Simpleks. Jurnal Bayesian, 1(1), 1-16. https://doi.org/10.46306/bay.v1i1.1

Bidiawati, A., & Setiawati, L. (2020). Kajian Drum-Buffer-Rope Berbasis Theory of Contraint Untuk Menyeimbangkan Aliran Produksi. Inaque : Journal of Industrial and Quality Engineering, 8(1), 59–68. https://doi.org/10.34010/iqe.v8i1.2764

Ervil, R., & Yulanda, Z. N. (2020). Identifikasi Kendala Pada Proses Produksi dengan Menggunakan Theory of Constrain (TOC) Dalam Mengoptimalkan Kapasitas Produksi PDAM Gunung Pangilun. Jurnal Sains dan Teknologi, 20(2), 162-167. https://doi.org/10.36275/stsp.v20i2.295

Eunike, A., Setyanto, N. W., Yuniarti, R., Hamdala, I., Lukodono, R. P., & Fanani, A. A. (2021). Perencanaan Produksi dan Pengendalian Persediaan.

Fathurohman, N. (2020). Usulan Waktu Standar Kerja pada Produksi Kaos Polos Menggunakan Metode Stopwatch Time Study di Suckseed Konveksi Tasikmalaya. JMIG, 1(1), 31-40. https://ojs.unigal.ac.id/index.php/jmig/article/download/2351/1826/8094

Gofur, M., Sarjono., Saputra, D. M., Apriani, A. Y. (2023). Optimization of Basket Oven Oil Seal Design for Quality, Productivity, and Material Handling. IJIEM, 4(3), 618-623. https://doi.org/10.22441/ijiem.v4i3.20303

Heldayani, & Yuamita, F. (2022). Perbaikan Work Station Dan Pengukuran Waktu Kerja Dalam Menentukan Waktu Standar Guna Meningkatkan Produktivitas Pada Lini Kerja Spot Assembly (Studi Kasus Pt Indonesia Thai Summit Auto). Jurnal Ilmiah Multidisiplin, 1(9), 2944-2956. https://journal-nusantara.com/index.php/JIM/article/view/688/549

Krisna, D. D., & Sumiati. (2023). Optimization of Teller Services Using Queuing Theory at XYZ Bank. IJIEM, 4(3), 440-447. https://doi.org/10.22441/ijiem.v4i3.21359

Kristiana, L. R., & Sunarni, T. (2018). Aplikasi Pendekatan Theory of Constraints pada Maksimasi Throughput Produksi PT XYZ. Jurnal Media Teknik & Sistem Industri, 2(2), 11–19. https://doi.org/10.35194/jmtsi.v2i2.399

Pradana, A. Y., & Pulansari, F. (2021). Analisis Pengukuran Waktu Kerja dengan Stopwatch Time Study untuk Meningkatkan Target Produksi di PT. XYZ. Jurnal Manajemen Industri Dan Teknologi, 2(1), 13–24. https://doi.org/10.33005/juminten.v2i1.217

Prawiro, K. K., & Adi, P. (2021). Perancangan Sistem Penentuan Lead Time Produksi Berdasarkan Kapasitas dan Waktu Baku pada PT. X. Jurnal Tirta, 9(2), 261–268. https://publication.petra.ac.id/index.php/teknik-industri/article/view/8980/8101

Purwadinata, S., & Batilmurik, R. W. (2020). PENGANTAR ILMU EKONOMI. Literasi Nusantara.

Rahmawati, D., & Nursubiyantoro, E. (2019). Optimalisasi Kapasitas Stasiun Kerja Dengan Penerapan Theory of Constraints (TOC). Jurnal OPSI, 12(1), 12-19. https://doi.org/10.31315/opsi.v12i1.2828

Salimah, S., & Dzikron, M. (2021). Reduksi Stasiun Kerja Bottleneck pada Produksi Pakaian Gamis dan Koko dengan Menggunakan Theory of Constraints. Jurnal Riset Teknik Industri, 1(1), 49–57. https://doi.org/10.29313/jrti.v1i1.140

Sitorus, H., Rosihan, R. I., & Afiat, A. N. (2022). Optimasi Kapasitas Produksi Bantal dengan Menggunakan INTEGER Linier Programming di PT. Dunlopillo Indonesia. Jurnal Pasti, XVI(2), 136–147. https://dx.doi.org/10.22441/pasti.2022.v16i2.002

Situmorang, O. C., Satya, R. R. D., & Herliawan, A. (2023). Optimalisasi Perencanaan Kapasitas Produksi dengan Metode Theory of Constraints dan Rough Cut Capacity Planning. Barometer, 8(1), 19–28. https://doi.org/10.35261/barometer.v8i1.6826

Suroso, H. C., & Yulvito. (2020). Analisa Pengukuran Waktu Kerja Guna Menentukan Jumlah Karyawan Packer di PT. Sinarmas Tbk. Jurnal IPTEK, 24(1), 67-74. https://doi.org/10.31284/j.iptek.2020.v24i1

Syiam, F., & Hastuti. (2021). Implementasi Theory of Constraints untuk Peningkatan Kapasitas Produksi dan Laba pada UMKM Teh Karya Tani. Prosiding The 12th Industrial Research Workshop and National Seminar, Vol. 12, 1240-1246. https://doi.org/10.35313/irwns.v12i0




DOI: http://dx.doi.org/10.22441/ijiem.v5i1.22515

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

IJIEM - Indonesian Journal of Industrial Engineering & Management
Program Pascasarjana Magister Teknik Industri Universitas Mercu Buana
Kampus Menteng - Gedung Tedja Buana, Floor 4th  
Jl. Menteng Raya No. 29  Jakarta Pusat- Indonesia
Tlp.: +62 21 31935454 Fax: +62  21 31934474
http://publikasi.mercubuana.ac.id/index.php/ijiem

Email:  [email protected]

 

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

 

Web Analytics Made Easy - Statcounter View My Stats

The journal is indexed by: