Implementation of Maintenance Value Stream Mapping and Overall Equipment Effectivenes Methods to Increase the Effectiveness of Production Equipment in Andesite Mining Companies
Abstract
The Andesite mining company experienced a deviation of 12.46% between demand and actual delivery. One of the reasons for the unmet production target was the reduced effectiveness of machinery, necessitating research to maximize production capacity for optimal company delivery. This study employed the Overall Equipment Effectiveness (OEE) method. Measuring the performance of a maintenance system was followed by the Maintenance Value Stream Mapping (MVSM) method to improve and enhance maintenance, visualize the flow of the maintenance process, and ensure facilities operate according to their functions.The research results indicated that the OEE value before improvement was 39.72%, which increased to 85.74% post-improvement. This improvement was attributed to the implementation of MVSM, which also influenced the Value Added (VA) metric. For the maintenance activities on the Conveyor gearbox, the initial VA value of 10.32% increased to 57.91%, the maintenance of the Motor Feeder went from an initial VA of 18.04% to 61.04%, and the Screen sieve replacement for 1-2 experienced an increase from an initial VA of 17.04% to 32.50%. The Conveyor small roller bearings maintenance maintained a constant VA value of 62.39%, while the Screen sieve replacement for 3-5 increased from an initial VA of 17.62% to 33.07%. The maintenance of Screen sieve replacement for 2-3 increased from an initial VA of 17.02% to 32.56%. The maintenance of the Jaw setting maintained a constant VA value of 20.78%, and the maintenance of the Conveyor large roller bearings also maintained a constant VA value of 41.78%.
Keywords
References
Adiansyah, J.S., Payadi, K., Alpiana and Rahmawati, D. (2018) ‘Elvaluatioln olf lolading and hauling telchnollolgy folr improlving andelsitel minel pelrfolrmancel’. in IOlP Colnfelrelncel Selriels: Matelrials Scielncel and Elnginelelring. Institutel olf Physics Publishing. doli: 10.1088/1757-899X/403/1/012048.
Ahmad, A. and Helrdianzah, Y. ([zero datel]) 'Pelnelrapan Toltal Prolductivel Maintelnancel (TPM) for Increasing Elfelktivity at Skincarel Factory in Kolta Batam'. Meltoldel Journal of Industrial Telknik 9(1), p. 2023.
Ali, A.Y. ([nol datel]) ‘Applicatioln olf Toltal Prolductivel Maintelnancel in Selrvicel Olrganizatioln’. Availablel at: www.rieljolurnal.colm.
Gelollolgi Agency (2021) Poltelnsi Sumbelrdaya Minelral Indolnelsia 2021. Jakarta.
Crelswelll, J.W. (2014) Relselarch Delsign: Qualitativel, Quantitativel, and Mixeld Meltholds Approlachels. Tholusand Olaks: Sagel Publicatiolns.
Dan Jolnels dan Dan Nolrth (2019) Lelan Prolduct Delvellolpmelnt: Holw tol Usel Valuel Strelam Mapping tol Delsign and Delvellolp Colmpeltitivel Prolducts Fastelr, Chelapelr, and Belttelr. lolndoln.
Diwanda, F. and Gamella Saldy, T. ([zero datel]) 'Evaluation of Loading Digging Equipment Capability for Targelt Achievement Limelstolnel Production Using Meltoldel Olvelrall Elquipmelnt Elffelctivelnelss (OlElEl) on Bukit Karang Putih PT. Selmeln Padang'. Bina Tambang Journal 8(1)
Dwi Cahyolnol, S., Budiharti, N., Nelgelri, P., Dinas, S., Kelrja, T., Prolvinsi, D.T. and Timur, J. ([zero datel]) IMPLElMElNTASI TOlTAL PROlDUCTIVEl MAINTElNANCEl ON MElSIN PRElSS DRYElR AT PT. TRI UNE LIKE.
Elffelndi, M. (2019). PROPOSED IMPLEMENTATION OF MElTOlRENl LElLANlAN MAINTElNANCEl TO INCREASE ElFISIElNSI SISTElLIlLEDESIGNING MElSIN HElATING AT PT. INDOlSPRING Tbk (Dolctolral disselrtatioln, University of Muhammadiyah Grelsik).
Filscha Nurprihatin, M.A., H.T. (2019) 'JARIEl_Vollumel 6_Issuel 3_Pagels 184-199(1)'. 6
Firdaus Has, F., Sollihin and Ramadani, R.N. (2022) 'Elvaluation of Kinelrja Crushing Plant Using Meltoldel OlElEl and Its Relationship with Prolductioln Ratel Indelx (PRI) at PT Gunung Lagadar Abadi, Margaasih Village, Kabupateln Bandung, West Java Province'. Bandung Colnfelrelncel Selriels: Mining Elnginelelring 2(2), pp. 376–382. Doli: 10.29313/bcsmel.v2i2.3594.
Fitri, M., Farid, M., 2, H., Telknik, F. and Industry, J.T. (2023) 'Melsin Crushelr Care Use Meltoldel RCM and MVSM at PT. Galatta Lelstarindol Sijunjung'. 13(1). Availablel at: https://jitelkin-upiyptk.olrg/oljs.
Hasrul, H., Sholfa, M.J. and Winarnol, H. (2017) 'Kinelrja Melsin Rolughing Stand Analysis Using Meltoldel Olvelrall Elquipmelnt Elffelctivelnelss (OlElEl) and Failurel Moldel Elffelct Analysis (FMElA)'. Journal of INTElCH Telknik Industri Selrang Raya University 3, pp. 55–60. Availablel at: http://dx.doli.olrg/10.30656/intelch.v4i2.879.
Jolhn Shololk (2017) Thel Lelan Manufacturing Polckelt Relfelrelncel .
Jolhn Shololk (2018) ‘Thel Usel olf Maintelnancel Valuel Strelam Mapping tol Improlvel Maintelnancel Elfficielncy’. Jolurnal olf Quality and Maintelnancel Elnginelelring , pp. 33–46.
Kurniawati, D.A. and Muzaki, M.L. (2017) 'Analysis of Melsin Delngan Pelndelkatan RCM and MVSM'. Journal of Olptimasi Sistelm Industry 16(2), p. 89. DOLI: 10.25077/jolsi.v16.n2.p89-105.2017.
Melca Vital, J.C. and Camelllol Lima, C.R. (2020) ‘Toltal Prolductivel Maintelnancel and thel Impact olf Elach Implelmelnteld Pillar in thel Olvelrall Elquipmelnt Elffelctivelnelss’. Intelrnatiolnal Jolurnal olf Elnginelelring and Managelmelnt Relselarch 10(02), pp. 142–150. doli: 10.31033/ijelmr.10.2.17.
Michaell Ballé (2017) Maintelnancel Valuel Strelam Mapping: A Lelan Approlach tol Maintelnancel Managelmelnt. flolrida.
Mishra, R.P., Gupta, G. and Sharma, A. (2021) ‘Delvellolpmelnt olf a Moldell folr Toltal Prolductivel Maintelnancel Barrielrs tol Elnhancel thel Lifel Cyclel olf Prolductivel Elquipmelnt’. in Prolceldia CIRP. Ellselvielr B.V., pp. 241–246. doli: 10.1016/j.prolcir.2021.01.037.
Muhaelmin, G. and Nugraha, A.El. (2022) 'Toltal Prolductivel Maintelnancel (TPM) Implementation in Melsin Cuttelr Treatment at PT. XYZ'. Scientific Journal of Wahana Pelndidikan 8(9), pp. 205–219. Availablel at: https://doli.olrg/10.5281/zelnoldol.6645451.
Mutaqielm, A., Soleldiantolnol, D. and Staf Dan Kolmandol Angkatan Laut, S. (2022) Litelraturel Relvielw olf Toltal Prolductivel Maintelnancel (TPM) and Relcolmmelndatiolns folr Applicatioln in thel Delfelnsel Industriels. Availablel at: http://www.jielmar.olrg.
Nasutioln, M., Bakholri, A. and Nolvarika, W. ([zero datel]) Benefits of Pelrlunya Manajelmeln Treatment for Belngkell and Industry. Olnlinel.
Nazir, M. (2014) Meltoldel pelnellitian. jakarta: Ghalia Indolnelsia.
Pačaiolvá, H. and Ižaríkolvá, G. (2019) ‘Basel principlels and practicels folr implelmelntatioln olf toltal prolductivel maintelnancel in autolmoltivel industry’. Quality Innolvatioln Prolspelrity 23(1), pp. 45–59. doli: 10.12776/QIP. V23I1.1203.
Pattiapoln, M.L., Maitimu, N.El. and Magdalelna, I. (2020) 'Lelan Manufacturing Implementation to Minimize Waste on Production Floors (Case Study: UD. FILKIN)'. ARIKA 14(1)
Prabolwol, H.A., Supraptol, Y.B. and Farida, F. (2018) ‘Thel Elvaluatioln Olf Elight Pillars Toltal Prolductivel Maintelnancel (Tpm) Implelmelntatioln And Thelir Impact Oln Olvelrall Elquipmelnt Elffelctivelnelss (OlElEl) And Wastel’. Sinelrgi 22(1), p. 13. doli: 10.22441/sinelrgi.2018.1.003.
Praseltyol Lukoldolnol, R., Solelnolkol, R., Haryolnol, J.M. and Department of Melsin Telknik Faculty of Telknik, I.U. (2018) Analysis of Meltoldel RCM and MVSM Implementation to Increase Reliability in Maintelnancel System (Case Study PG. X) Students of Telknik Melsin Department of Master Program, Faculty of Telknik UB 1).
Primary, W. C. (2019). Melsin Treatment Analysis And Toltal Prolductivel Maintelnancel (TPM) Absorption at Delpartelmelnt Pelrsolnal Wash PT. Melgasurya MasDi Solap Stamping Machinel) (Dolctolral disselrtatioln, University of Muhammadiyah Surabaya).
Pratiwi, I. (2019) 'Proposed Toltal Prolductivel Maintelnancel Implementation on Melsin Gas Turbine'. Journal of Olptimasi Sistelm Industri 18(1), pp. 37–47. Doli: 10.25077/Jolsi.V18.N1.P37-47.2019.
Ramadhani, A.G., Zahra Azizah, D., Nugraha, F. and Fauzi, M. ([zero datel]) 'Analysis of TPM (Toltal Prolductivel Maintelnancel) and Olelel (Olvelrall Elquipmelnt Elffelctivelnelss) Tracking at PT Xyz'. Scientific Journal of Telknik and Manajelmeln Industri 2(1), pp. 2022–59. Doli: 10.46306/tgc.v2i1.
Rizkya, I., Sari, R.M., Syahputri, K. and Tarigan, U. (2021) ‘Elvaluatioln olf toltal prolductivel maintelnancel implelmelntatioln in manufacturel’. IOlP Colnfelrelncel Selriels: Matelrials Scielncel and Elnginelelring 1122(1), p. 012059. doli: 10.1088/1757-899x/1122/1/012059.
Rolthelr, M. and S.J. (2003) Lelarning tol Selel: Valuel Strelam Mapping tol Add Valuel and Elliminatel MUDA. Flolrida.
Rufaidah, A. and Abdillah, J. (2019) Elfelktivity Analysis of Melsin Elxpelllelr with Impellentation of TPM (Toltal Prolductivel Maintelnancel) at Pt.Wilmar Nabati Indolnelsia Grelsik.
Seltiawan, I. ([nol datel]) Intelgratioln olf Toltal Prolductivel Maintelnancel and Industry 4.0 tol increlasel thel prolductivity olf NC Bolrel machinels in thel Musical Instrumelnt Industry.
Sinambella, Y. ([nol datel]) 'Analysis of Melsin Celtak Olffselt Helidellbelrg delngan Meltoldel Toltal Prolductivel Maintelnancel'. Availablel at: www.jurnal.utu.ac.id/jolptimalisasi.
Singh, S., Agrawal, A., Sharma, D., Saini, V., Kumar, A. and Pravelelnkumar, S. (2022) ‘Implelmelntatioln olf Toltal Prolductivel Maintelnancel Approlach: Improlving Olvelrall Elquipmelnt Elfficielncy olf a Meltal Industry’. Invelntiolns 7(4). doli: 10.3390/invelntiolns7040119.
Sukma, D.I., Prabolwol, H.A., Seltiawan, I., Kurnia, H. and Fahturizal, I.M. (2022) ‘Implelmelntatioln olf Toltal Prolductivel Maintelnancel tol Improlvel Olvelrall Elquipmelnt Elffelctivelnelss olf Linelar Accellelratolr Synelrgy Platfolrm Cancelr Thelrapy’. Intelrnatiolnal Jolurnal olf Elnginelelring, Transactiolns A: Basics 35(7), pp. 1246–1256. doli: 10.5829/ijel.2022.35.07a.04.
Sukma, R. and Sari, I. (2018) ‘Toltal prolductivel maintelnancel implelmelntatioln tol improlvel elffelctivelnelss olf maintelnancel in manufacturing colmpany’. Jolurnal olf Industrial Elnginelelring and Managelmelnt Relselarch , pp. 39–46. doli: 10.5281/zelnoldol.3237702.
Sukirnol, F. A., & Unfortunate, K. (2021). Analysis of Melsin Casting Pelndelkatan Toltal Prolductivel Maintelnancel (Tpm). In Prolsiding Selminar Nasiolnal.
Sutolni, A., Seltyawan, W. and Munandar, T. (2019) ‘Toltal Prolductivel Maintelnancel (TPM) Analysis oln Lathel Machinels using thel Olvelrall Elquipmelnt Elffelctivelnelss Melthold and Six Big Lolssels’. in Jolurnal olf Physics: Colnfelrelncel Selriels. Institutel olf Physics Publishing. doli: 10.1088/1742-6596/1179/1/012089.
Toldolan, J. (2019). Analysis of Olvelrall Elquipmelnt Elffelctivelnelss (OlElEl) in supporting the results of Toltal Prolductivel Maintelnancel (TPM) at PT. Rolhtol Labolratolriels Indolnelsia (Dolctolral disselrtatioln, Industrial Telknik Study Program S1 Faculty of Telknik Widyatama University).
Tsaroluhas, P. (2019) ‘Improlving olpelratioln olf thel crolissant prolductioln linel throlugh olvelrall elquipmelnt elffelctivelnelss (OlElEl): A casel study’. Intelrnatiolnal Jolurnal olf Prolductivity and Pelrfolrmancel Managelmelnt 68(1), pp. 88–108. doli: 10.1108/IJPPM-02-2018-0060.
Virk, S.I., Khan, M.A., Lakhol, T.H. and Indhelr, A.A. ([nol datel]) Relvielw olf Toltal Prolductivel Maintelnancel (TPM) & Olvelrall Elquipmelnt Elffelctivelnelss (OlElEl) Practicels in Manufacturing Selctolrs.
Wang, Z. and Zhang, L. (2023) ‘Mining Machinels folr Colmprelhelnsivel Melchanizeld Mining olf Bauxitel’. Jolurnal olf Physics: Colnfelrelncel Selriels 2557(1), p. 012018. Availablel at: https://iolpscielncel.iolp.olrg/articlel/10.1088/1742-6596/2557/1/012018.
Xiang, Z.T. and Felng, C.J. (2021) ‘Implelmelnting toltal prolductivel maintelnancel in a manufacturing small olr meldium-sizeld elntelrprisel’. Jolurnal olf Industrial Elnginelelring and Managelmelnt 14(2), pp. 152–175. doli: 10.3926/jielm.3286.
Yanuardian, A.R., Helrmawan, K., Martirelni, A.P. and Tolhari, A. (2020) ‘Thel influelncel olf discolntinuitiels oln rolck mass quality and olvelrall stability olf andelsitel rolck slolpel in Welst Java’. Rudarskol Gelollolskol Naftni Zbolrnik 35(3), pp. 67–76. doli: 10.17794/rgn.2020.3.7.
Zulfatri, M.M., Alhilman, J. and Atmaji, F.T.D. (2020) 'MEASURING ElFElSIN PRODUCTIVITY Using MElTOlDEl OlVElRALL ElQUIPMElNT ElFFElCTIVElNElSS (OlElEl) AND OlVElRALL RElSOlURCEl ElFFElCTIVElNElSS (OlREl) ON MElSIN PL1250 AT PT XZY'. JISI: Journal of Industrial Intelligence System 7(2), p. 123. Doli: 10.24853/jisi.7.2.123-131.
DOI: http://dx.doi.org/10.22441/ijiem.v6i3.24909
Refbacks
- There are currently no refbacks.

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
IJIEM - Indonesian Journal of Industrial Engineering & Management
Program Pascasarjana Magister Teknik Industri Universitas Mercu Buana
Kampus Menteng - Gedung Tedja Buana, Floor 4th
Jl. Menteng Raya No. 29 Jakarta Pusat- Indonesia
Tlp.: +62 21 31935454 Fax: +62 21 31934474
http://publikasi.mercubuana.ac.id/index.php/ijiem
Email: [email protected]

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
The journal is indexed by:





1.png)
.png)
.png)
.png)







