Measurement of the Physiological Workload of Sorting Station Operators in A Palm Oil Processing Factory

Tosty Maylangi Sitorus; Rizki Fadhillah Lubis; Briliyan Tamami

doi:10.22441/ijiem.v5i3.25071

Authors

Tosty Maylangi Sitorus Industrial Engineering, Politeknik ATI Padang, Bungo Pasang, Koto Tangah, Padang City, West Sumatera 25171, Indonesia
Rizki Fadhillah Lubis Industrial Engineering, Politeknik ATI Padang, Bungo Pasang, Koto Tangah, Padang City, West Sumatera 25171, Indonesia
Briliyan Tamami Industrial Engineering, Politeknik ATI Padang, Bungo Pasang, Koto Tangah, Padang City, West Sumatera 25171, Indonesia

DOI:

https://doi.org/10.22441/ijiem.v5i3.25071

Keywords:

Workoad, Physiological, Palm oil

Abstract

One of the palm oil processing industries in Riau that has isolated entrepreneurs as part of its work. Based on the results of continuous observations using the Nordic Body Map (NBM) Questionnaire, 75% of working waste handlers experience complaints in the hands, waist, and legs. So the workload of processing operators is measured using a physiological approach in one of the palm oil processing industries in Riau. Measurements using a physiological approach are carried out objectively using the method of heart rate, energy expenditure, %CVL, and energy consumption. Based on the principles of heart rate, energy expenditure budget and %CVL, the results were found to be non-standard which requires additional improvements based on the energy expenditure budget and %CVL method.

Downloads

Download data is not yet available.

References

Akbar, M. A., Ramdhani, R. F., & Nuraeni, S. (2021). Analisis Beban Kerja Fisiologis dan Psikologis Menggunakan Metode Cardiovascular Load dan NASA TLX di PJT II Jatiluhur. Operations Excellence: Journal of Applied Industrial Engineering, 13(1), 139. https://doi.org/10.22441/oe.2020.v13.i1.014

Amelia Rosalina Putri & Arfan Bakhtiar. (2023). Analisis Beban Kerja Fisiologis Dan Psikologis pada Tenaga Kerja Bongkar Muat Bahan Peledak Menggunakan Metode Cardiovaskular Load (CVL) Dan National Aeronautics And Space Administration – Task Load Index (NASA- TLX) (Studi Kasus PT Semen Padang). Industrial Engineering Online Journal, 12(2).

Ariq Adhari Basri & Agustian Suseno. (2023). Klasifikasi Beban Kerja Berdasarkan Denyut Jantung Untuk Mengurangi Tingkat Kelelahan Dalam Bekerja. Journal Serambi Engineering (JSE), 8(3), 6056–6061. https://doi.org/10.32672/jse.v8i3

Atuna, V., & Safirin, M. T. (2023). Analysis of Employee Work Posture with the Quick Exposure Check (QEC) and Rapid Entire Body Assessment (REBA) Method (Case Study: CV. Wijaya Mandiri Label). IJIEM - Indonesian Journal of Industrial Engineering and Management, 4(3), 448. https://doi.org/10.22441/ijiem.v4i3.21369

Baihaqi, A. R., & Suryadi, A. (2024). Shift Work System Analysis of Store Employee Fatigue Using the Subjective Self Rating Test and Independent Sample T Test Methods (Case of Sports Station Plaza Surabaya). IJIEM - Indonesian Journal of Industrial Engineering and Management, 5(1), 158. https://doi.org/10.22441/ijiem.v5i1.22245

Cahyo Kuncoroyekti, P. H., & Yuniawan, A. (2024). The Effect of Work Motivation, Work Stress and Work Environment on Employee Performance. IJIEM - Indonesian Journal of Industrial Engineering and Management, 5(1), 314. https://doi.org/10.22441/ijiem.v5i1.21096

Euis Nina Saparina Yuliani, Ketut Tirtayasa, I Putu Gede Adiatmika, Hardianto Iridiastadi, & Nyoman Adiputra. (2021). Studi Literatur: Pengukuran Beban Kerja. Jurnal Penelitian Dan Aplikasi Sistem & Teknik Industri (PASTI), 15(2), 194–205. https://doi.org/10.22441/pasti.2021.v15i2.008

Hidayat, W., Ristyowati, T., & Putro, G. M. (2020). Analisis Beban Kerja Fisiologis sebagai Dasar Penentuan Waktu Istirahat untuk Mengurangi Kelelahan Kerja. OPSI, 13(1), 62. https://doi.org/10.31315/opsi.v13i1.3469

Lina Dianati Fathimahhayati, Theresia Amelia, & Andra Noor Syeha. (2019). Analisis Beban Kerja Fisiologi Pada Proses Pembuatan Tahu Berdasarkan Konsumsi Energi (Studi Kasus: UD. Lancar Abadi Samarinda). Jurnal INTECH Teknik Industri Universitas Serang, 5(2), 100–106. https://doi.org/10.30656/intech.v5i2.1695

Melliya, P. A., & Noveicalistus, H .D. (2023). Pengukuran Beban Kerja Fisik Dan Mental Dengan Metode CVL, Brouha Dan Nasa-Tlx Pada Operator SPBU Pertamina 64.783.14. INTEGRATE: Industrial Engineering and Management System, 7(1), 95–100.

Moh. Alyafi Dg. Matiro, Raman S. Mau, Abdul Rasyid, & Fentje Abdul Rauf. (2021). Pengukuran Beban Kerja Menggunakan Metode Full Time Equivalent (FTE) Pada Divisi Proses PT. Delta Subur Permai. Jambura Industrial Review (JIREV), 1(1). https://doi.org/10.37905/jirev.v1i1.7774

Muzakiki, M. A., Rizqi, A. W., & Priyana, E. D. (2023). Analisis Beban Kerja Fisiologis Pada Karyawan Bongkar Muat Bahan Bangunan Dengan Metode CVL Dan Konsumsi Kalori. Jurnal Teknik Industri: Jurnal Hasil Penelitian Dan Karya Ilmiah Dalam Bidang Teknik Industri, 9(2), 447. https://doi.org/10.24014/jti.v9i2.23051

Nadila, F. E., & Suryadi, A. (2024). Analysis of Work Posture and Risk of Musculoskeletal Complaints of Loading-Unloading Workers Using the REBA Method at PT. XYZ. IJIEM - Indonesian Journal of Industrial Engineering and Management, 5(1), 69. https://doi.org/10.22441/ijiem.v5i1.21878

Pridynafiah, L., & Waluyo, M. (2024). Analysis of the Influence of Human Resource Development, Motivation, and Work Environment on Employee Performance and Employee Productivity (Case Study at PT. Mandiri Karya Kirana). IJIEM - Indonesian Journal of Industrial Engineering and Management, 5(2), 465. https://doi.org/10.22441/ijiem.v5i2.22341

Rahayu, M. (2020). Analisis Beban Kerja Fisiologis Mahasiswa Saat Praktikum Analisa Perancangan Kerja dengan Menggunakan Metode 10 Denyut. UNISTEK, 7(1), 16–20. https://doi.org/10.33592/unistek.v7i1.463

Risky, T.A., Suardika, I. B., & Emmalia, A. (2021). Pengukuran Beban Kerja Fisiologis Untuk Mengurangi Keluhan Musculoskeletal Disorders (MSDS) Pada Pekerja Packaging Uppks Maharani. Jurnal Valtech, 4(1). https://doi.org/10.36040/valtech.v4i1.3393

Shakty Adhea Aditya, Ade Momon Subagyo, & Aldi Pratama. (2022). Analisis Fisiologi Kerja untuk Mengetahui Beban Kerja Fisik pada Pekerja Produksi di UKM Makaroni dan Kerupuk DO’A IBU. Jurnal Ilmiah Wahana Pendidikan, 8(3), 116–120. https://doi.org/10.5281/zenodo.6301701

Sitorus, T. M., Novia, C., Lubis, R. F., Zulhamidi, Z., & Senjawati, M. I. (2023). Analisis Lama Waktu Istirahat Berdasarkan Beban Kerja Operator Trolley Dengan Pendekatan Fisiologis Pada Crumb Rubber Industry Di Sumatera Barat. Jurnal Teknologi Dan Manajemen, 21(2), 125–130. https://doi.org/10.52330/jtm.v21i2.123

Souisa, J., Ariefiantoro, T., Susanto, S., & Niati, A. (2023). The Influence of Leadership Style, Work Stress, and Work Motivation on Employee Loyalty to PT. Hartono Palace of Technology. IJIEM - Indonesian Journal of Industrial Engineering and Management, 4(2), 133. https://doi.org/10.22441/ijiem.v4i2.20163

Vanny, R., Kusumah, A., & Ramadhan, R. R. (2023). Pengaruh Beban Kerja, Lingkungan Kerja Fisik Dan Lingkungan Kerja Non Fisik Terhadap Kinerja Karyawan Unit Gizi Rs Awal Bros Pekanbaru. Prosiding Seminar Nasional Ekonomi, Bisnis & Akuntansi, 3, 1087–1096.