Email this article 1.png){kind=logo}
.png)
.png)
.png)
HAZARD RISK ASSESSMENT IN POST WELD HEAT TREATMENT PROCESS USING THE FINE-KINNEY METHOD
Abstract
Hazards in the workplace are sources that have the potential to cause work accidents that can harm workers, therefore it is important to carry out a hazard risk assessment as an effort to eliminate or reduce the risk of hazards in the workplace to protect workers. The purpose of this study is to asses the risk of hazards of Post Weld Heat Treatment (PWHT) process for pipes in a manufacturing company through identification of potential hazards, risks analysis and evaluation to determine control measures. Hazards identification in the PWHT work revealed there are 34 hazards that have the potential to cause work accidents. Hazard risk analysis using Fine-Kinney method shows the hazard risk levels in the PWHT work is from low to high, with a low level risk percentage of 23.5%, a possible risk level of 20.6%, a substantial risk level of 47.1% and a high risk level of 8.8%. The proposed control measures for eliminating or reducing the risk of hazard in each task is carried out by hierarchy of controls through the elimination, substitution, engineering controls, administrative controls and personal protective equipment.
.
Keywords
References
Albrechtsen, E., Solberg, I., & Svensli, E. (2019). The application and benefits of job safety analysis. Safety Science, 113, 425–437. https://doi.org/10.1016/j.ssci.2018.12.007
Ayuningtyas, A. I., & Nasri, S. M. (2021). Health Risk Assessment of Physical and Chemical Hazards in the Painting Area of a Manufacturing Company. The Indonesian Journal Of Occupational Safety and Health, 10(2), 247. https://doi.org/10.20473/ijosh.v10i2.2021.247-257
Bagdatlı, M. C., & KILIÇ, A. M. (2020). Occupational Safety Risk Analysis of Organized Industrial Enterprises in Nevsehir Province of Turkey by Fine-Kinney Method. International Journal of Engineering Technologies and Management Research, 7(7),33–41. https://doi.org/10.29121/ijetmr.v7.i7.2020.722
Çalış Boyacı, A., & Selim, A. (2022). Assessment of occupational health and safety risks in a Turkish public hospital using a two-stage hesitant fuzzy linguistic approach. Environmental Science and Pollution Research, 29(24), 36313–36325.
Fine, W. T. (1971). Mathematical Evaluation for Controlling Hazards. Journal of Safety Research, 3(4), 157–166.
Gul, M., Guneri, A. F., & Baskan, M. (2018). An Occupational Risk Assessment Approach for Construction and Operation Period of Wind Turbines. Global J. Environ. Sci. Manage, 4(3), 281–298.
Heinrich, H.W. 1941. Industrial Accident Prevention: A Scientific Approach. 2nd ed. New York and London: Mc.Graw-Hill Book Company, Inc.
International Organization for Standardization. (2018). ISO 31000:2018 Risk management-Guidelines. ISO. https://www.iso.org/obp/ui/#iso:std:iso:31000:ed-2:v1:en
Jaya, N. M., Dharmayanti, G. A. P., & Mesi, D. A. R. U. (2021). Manajemen Risiko K3 ( Keselamatan dan Kesehatan Kerja) Pada Proyek Pembangunan Rumah Sakit Bali Mandara. Jurnal Spektran , 9(1), 29–37.
Khan, F. I., & Abbasi, S. A. (1997). Accident Hazard Index. Process Safety and Environmental Protection, 75(4), 217–224.https://doi.org/10.1205/095758297529093
Kinney, G. F., & Wiruth, A. D. (1976). Practical Risk Analysis for Safety Management.
Kokangül, A., Polat, U., & Dağsuyu, C. (2017). A new approximation for risk assessment using the AHP and Fine Kinney methodologies. Safety Science, 91, 24–32. https://doi.org/10.1016/j.ssci.2016.07.015
Larasatie, A., Fauziah, M., Dihartawan, D., Herdiansyah, D., & Ernyasih, E. (2022). Faktor-Faktor Yang Berhubungan Dengan Tindakan Tidak Aman (Unsafe Action) Pada Pekerja Produksi Pt. X. Environmental Occupational Health And Safety Journal, 2(2), 133. https://doi.org/10.24853/eohjs.2.2.133-146
Luri, H., & Rinawati, D. I. (2019). Analisis Risiko Keselamatan Dan Kesehatan Kerja Dengan Menggunakan Job Hazard Analysis (Studi Kasus PT. Pertamina EP Asset 4 Field Cepu). Industrial Engineering Online Journal, 8(1), 1–11.
Lyon, B., & Popov, G. (2021a). Preliminary Hazard and Risk Analysis. In Risk Assessment (pp. 123–136). Wiley. https://doi.org 10.1002/9781119798323.ch6
Lyon, B., & Popov, G. (2021b). “What‐if” Analysis Methods. In Risk Assessment (pp.137–151).Wiley. https://doi.org/10.1002/9781119798323.ch7
Milli, A., Salman, S., & Sancak, E. (2021). Case of Risk Assessment by Using Fine-Kinney Method in Sub-Leather Processing. Journal of Engineering Sciences , 4(1), 42–57.
Muhammad, I., & Susilowati, I. H. (2021). Analisa Manajemen Risiko K3 Dalam Industri Manufaktur Di Indonesia: Literature Review. PREPOTIF : Jurnal Kesehatan Masyarakat, 5(1), 335–343. https://doi.org/10.31004/prepotif.v5i1.1635
Nasra, K. A., Zuldesmi, & Kewas, J. C. (2020). Pengaruh Post Weld Heat Treatment Terhadap Sifat Mekanik Dan Struktur Mikro Baja Karbon ST42 Dengan Pengelasan SMAW (Shielded Metal Arc Welding). Actuator Jurnal Teknik Mesin, 1(1), 26–36.
Penelas, A. de J., & Pires, J. C. M. (2021). HAZOP Analysis in Terms of Safety Operations Processes for Oil Production Units: A Case Study. Applied Sciences, 11(21),10210. https://doi.org/10.3390/app112110210
Ponda, H., & Fatma, N. F. (2019). Identifikasi Bahaya, Penilaian Dan Pengendalian Risiko Keselamatan Dan Kesehatan Kerja (K3) Pada Departemen Foundry Pt. Sicamindo. Heuristic, 16(2). https://doi.org/10.30996/he.v16i2.2968
Purba, M. F. I., Al Fathier, & Fakhriza. (2020). Pengaruh Variasi Temperatur PWHT Dan Tanpa PWHT Terhadap Sifat Kekerasan Baja ASTM A106 Grade B Pada Proses Pengelasan SMAW. Journal of Welding Technology, 2(1), 13–18.
Rivera Domínguez, C., Pozos Mares, J. I., & Zambrano Hernández, R. G. (2021). Hazard identification and analysis in work areas within the Manufacturing Sector through the HAZID methodology. Process Safety and Environmental Protection, 145, 23–38. https://doi.org/10.1016/j.psep.2020.07.049
Sotoodeh, K. (2023). A case study demonstrating the use of Layers of Protection Analysis (LOPA) in order to prevent fire and explosion in storage tanks due to overfilling. Safety in Extreme Environments. https://doi.org/10.1007/s42797-023-00095-3
Srinivas, K. (2022). HIRA in Excavation in High Rise Buildings. AMC Indian Journal of Civil Engineering, 5(1), 34. https://doi.org/10.17010/ijce/2022/v5i1/170370
Stack, T., Ostrom, L. T., & Wilhelmsen, C. A. (2016). Occupational Ergonomics-A Practical Approach . John Wiley & Sonsm Inc.
The National Institute for Occupational Safety and Health (NIOSH). (2023). Hierarchy of Controls. NIOSH. https://www.cdc.gov/niosh/topics/hierarchy/default.html
Weng, J., Gan, X., & Zhang, Z. (2021). A quantitative risk assessment model for evaluating hazmat transportation accident risk. Safety Science, 137, 105198. https://doi.org/10.1016/j.ssci.2021.105198
Xiaoliang, Z., Qian, S., Daoliang, Z., Zhikai, Z., Rui, H., & Huijuan, S. (2017). Risk assessment on chemical plants by the method of safety checklist analysis. Process Safety Progress, 36(1), 95–101. https://doi.org/10.1002/prs.11827
Yuliandi, C. D., & Ahman, E. (2019). Penerapan Keselamatan Dan Kesehatan Kerja (K3) Di Lingkungan Kerja Balai Inseminasi Buatan (Bib) Lembang. Jurnal Manajerial,18(2),98–109. https://doi.org/10.17509/manajerial.v18i2.18761
DOI: http://dx.doi.org/10.22441/ijiem.v6i1.26055
Refbacks
- There are currently no refbacks.
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
IJIEM - Indonesian Journal of Industrial Engineering & Management
Program Pascasarjana Magister Teknik Industri Universitas Mercu Buana
Kampus Menteng - Gedung Tedja Buana, Floor 4th
Jl. Menteng Raya No. 29 Jakarta Pusat- Indonesia
Tlp.: +62 21 31935454 Fax: +62 21 31934474
http://publikasi.mercubuana.ac.id/index.php/ijiem
Email: [email protected]
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
The journal is indexed by:
