Application of Measurement System Analysis (MSA) for Assesment of Tire Pressure Monitoring in Coal Mining Trucks

Selamat W. Hia

doi:10.22441/ijiem.v5i3.26255

Application of Measurement System Analysis (MSA) for Assesment of Tire Pressure Monitoring in Coal Mining Trucks

Selamat W. Hia

Abstract

Tire pressure plays an important role in ensuring safe operation and performance of truck vehicles. Improper tire pressure always leads to tire life, vehicle safety, and performance. This paper discusses the application of measurement system analysis on truck tire pressure in a coal mining company. The study evaluates the measurement system of truck tire pressure. The company aims to extend the life span of its tire by maintaining and monitoring the tire pressure regularly. The tire pressure is measure by a pressure gauge. This study used measurement system analysis (MSA) to analyze the Gage R&R, with 2 tire men and 10 parts measured with 3 repetitions. The MSA results in a Total Gage R&R of 18.16% with a repeatability value of 12.34% and a reproducibility value of 13.32%. The result indicated that the measurement system showed good results for tire measurement applications because the Gage R&R was between 10% to 30%.

Keywords

MSA; Tire; ANOVA; Repeatability; Reproducibility

Full Text:

PDF

References

(AIAG), A. I. A. G. (2010). Measurement System Analysis (MSA) Fourth Edition (Vol. 4, Issue 1).

Abdulaev, E. K., Makharatkin, P. N., & Pumpur, E. V. (2019). A Priori Ranking and an Analysis of Factors Affecting Tire Wear. IOP Conference Series: Earth and Environmental Science, 378(1), 3–7. https://doi.org/10.1088/1755-1315/378/1/012001

Abhimanyu Yadav. (2016). Measurement Systems Analysis and a Study of Anova Method. International Journal of Research in Engineering and Technology, 05(02), 123–127. https://doi.org/10.15623/ijret.2016.0502022

Cepova, L., Kovacikova, A., Cep, R., Klaput, P., & Mizera, O. (2018). Measurement System Analyses - Gauge Repeatability and Reproducibility Methods. Measurement Science Review, 18(1), 20–27. https://doi.org/10.1515/msr-2018-0004

Deshpande, A., Dhakrao, R., Bhawsar, V., Bhavsar, S., Rayjade, G., & Ranade, P. (2020). Measurement System Scrutiny using Gage R&R: Case Study. International Research Journal of Engineering and Technology, June, 4224–4229. www.irjet.net

Dhawale, R., & Raut, D. N. (2013). Evaluating Measurement Capabilities by Gauge R&R Using ANOVA for Reliability. International Journal of Engineering Research and Applications, 3(3), 726–730. http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.419.6350

Galli, B. J. (2020). Measurement System Analysis and System Thinking in Six Sigma. International Journal of System Dynamics Applications, 9(1), 44–62. https://doi.org/10.4018/ijsda.2020010103

Gerger, A., Gör Atakan GERGER Ege Üniversitesi, Ö., & Meslek Yüksekokulu, E. (2021). Conducting a Gage R & R Study: An Application Example in Automotive Industry. Journal of Economics and Social Research Ekonomi ve Sosyal Araştırmalar Dergisi Conducting a Gage R & R Study: An Application Example in Automotive Industry. https://www.researchgate.net/publication/349625419

Klaput, P., & Plura, J. (2012). Influence of Used Method on The Results of Gage Repeatability and Reproducibility Study. METAL 2012 - Conference Proceedings, 21st International Conference on Metallurgy and Materials, 1756–1761.

Kumar, T. V., G.Ramya, P.Kowsalya, Priya, B. S., & P.Tharani. (2020). SMEs Perception towards Adoption of Measurement System Analysis Strategy : A Case Study in Pump Manufacturing Industry. Materials Science and Engineering, IOP Conference Series, 954. https://doi.org/10.1088/1757-899X/954/1/012006

Lindeque, G. C. (2016). A Critical Investigation into Tire Life on an Iron ore Haulage System. Journal of the Southern African Institute of Mining and Metallurgy, 116(4), 317–322. https://doi.org/10.17159/2411-9717/2016/v116n4a3

Moatari-Kazerouni, A. (2009). Design and Analysis of Gauge R & R Studies : Making Decisions Based on ANOVA Method. World Academy of Science, Engineering and Technology, 52(4), 31–35.

Saikaew, C. (2018). An Implementation of Measurement System Analysis For Assessment of Machine and Part Variations in Turning Operation. Measurement: Journal of the International Measurement Confederation, 118(March 2018), 246–252. https://doi.org/10.1016/j.measurement.2018.01.008

Schmitt, R., & Marcin Bauza. (2012). Measurement system analysis. CIRP Encyclopedia of Production Engineering, 70(9). https://doi.org/10.1002/9781118307502.ch6

Shao, J., & Qian, T. (2015). Measurement system Performance Analysis Using MINITAB. Proceedings of the First International Conference on Information Sciences, Machinery, Materials and Energy, 126(Icismme), 1679–1683. https://doi.org/10.2991/icismme-15.2015.347

Sivaraos, Raguvaran, M. J., Ali, A., Abdullah, M. F., Sivakumar, D., Ali, M., Hambali, A., Salleh, & Umesh, K. (2019). Vestigation of Tire Pressure Drop Phenomenon Using Specially Designed Real-Time Data Mining And Storage System. International Journal of Recent Technology and Engineering, 7(5), 533–537.

Sumasto, F., Nugroho, Y. A., Purwojatmiko, B. H., Wirandi, M., Imansuri, F., & Aisyah, S. (2023). Implementation of Measurement System Analysis to Reduce Measurement Process Failures on Part Reinf BK6. IJIEM - Indonesian Journal of Industrial Engineering and Management, 4(2), 212. https://doi.org/10.22441/ijiem.v4i2.20212

Ted Hessing. (2016). Gage Repeatability and Reproducibility (R&R). Six Sigma Study Guide, 1. https://sixsigmastudyguide.com/repeatability-and-reproducibility-rr/

Zhou, J., Hall, R. A., Fowler, G., & Huntingford, K. (2008). Evaluation of The Effect of Off-The-Road Tire Air Pressure Setting on Tire Performance. International Journal of Mining, Reclamation and Environment, 22(3), 237–244. https://doi.org/10.1080/17480930701679459

DOI: http://dx.doi.org/10.22441/ijiem.v5i3.26255

Refbacks

There are currently no refbacks.

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

IJIEM - Indonesian Journal of Industrial Engineering & Management
Program Pascasarjana Magister Teknik Industri Universitas Mercu Buana
Kampus Menteng - Gedung Tedja Buana, Floor 4^th
Jl. Menteng Raya No. 29 Jakarta Pusat- Indonesia
Tlp.: +62 21 31935454 Fax: +62 21 31934474
http://publikasi.mercubuana.ac.id/index.php/ijiem

Email: [email protected]

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.