Analysis of Work Station Capacity Planning Efficiency in A Steel Fabrication Project Using the Theory of Constraints Method (TOC)

Salsa Auliya Rachmah, Akmal Suryadi

Abstract


PT XYZ is a company engaged in steel fabrication, and there are several issues related to the production system of the PT Metso project that are known to be the source of bottlenecks at certain workstations, causing material flow on the production line to be impeded.  This research will discuss the calculation of standard time and identify bottlenecks at several workstations. The application of the theory of constraints that can help identify and control the sources of constraints with several objectives such as maximizing throughput and creating detailed calculations of time buffers and Drum Buffer Rope maps to address issues. Then an analysis was conducted using a fishbone diagram and the Five-M Analysis method to determine the causes that occurred. Based on the calculations that have been made for the company's capacity and capability, a rescheduling of the Spray Bar production process has been carried out with an additional working time of 19 hours divided into 2.5 hours per working day. It is known that the bottleneck workstation is located at the Fit-up/Setting workstation with a percentage of 133%. To reduce this bottleneck, the company provides buffer time or time that serves as a cushion with the aim of protecting the production rate (throughput) Before the bottleneck workstation, it took 19.5 hours, and after the bottleneck workstation, it took 2.2 hours.

Keywords


Drum buffer rope; Fishbone diagram; Five-M analysis; Theory of constraints

Full Text:

PDF

References


Ahadi, A. A. (2022). Penjadwalan Produksi Dengan Menggunakan Theory Of Constraint Pada Lini Produksi Tiang Pancang Bulat Di PT Wijaya Karya Beton Tbk. SIJIE Scientific Journal of Industrial Engineering, 3(2), 5–8. https://www.jim.unindra.ac.id/index.php/sijie/article/view/302%0Ahttps://www.jim.unindra.ac.id/index.php/sijie/article/download/302/1281

Ali, M. (2018). Manajemen Industri 4.0 (Pertama). UNY Press.

Aquilano, Nicholas J, Richard B, Chase and F Robert, Jacobs. (2004). Operation For Competitive Advantage, Six Edtition. Mc Grawhill. New York.

Dinni, F. (2020). Usulan Penjadwalan Produksi Menggunakan Pendekatan Theory Of Constraints Pada PT. XZY. Jurnal Indonesia Sosial Teknologi, 01(2), 305–322. https://doi.org/10.59141/jist.v1i02.17

Fajrah, N., Laila, W., Alfian, A., Hastarina, M., Wahyudi, B., Pratama, Y. D., Sunarni, T., Nasirly, R., Puji, A. A., Kusmindari, C. D., Harits, D., Arsi, F., Sari, R. K., Budiarto, Do., Afma, V. M., Wardah, S., Melliana, Lawi, A., Setiawan, H., & Zen, Z. H. (2023). Pengantar Teknik Industri. Penerbit Widina Media Utama.

Gaspersz, V. (2001). Production Planning & Inventory Control Berdasarkan Pendekatan Sistem Terintegrasi MRP II dan JIT Menuju Manufakturing 21. Jakarta : Vincent Foundation dan PT Gramedia Pustaka Utama

Ginting, R. (2012). Penjadwalan Mesin. Yogyakarta: Graha Ilmu.

Heizer, J., Render, B., & Munson, C. (2017). Operations Management Sustainability and Supply Chain Management. https://ndupress.ndu.

Hidayat, T., Ulum, R. B., & Widarman, A. (2023). Rencanaan Kapasitas Produksi Pupuk Dengan Menggunakan Metode Rough Cut Capacity Planning (Rccp) Pada Pt.Pupuk Kujang. Jurnal Ilmiah Multidisiplin, 2(04), 153–161. https://doi.org/10.56127/jukim.v2i04.816

Novantoro, H., & Singgih, M. (2023). Analisis Beban Kerja Dan Penentuan Jumlah Karyawan Divisi Produksi Dalam Menyelesaikan Target Dari Perusahaan. Jurnal Taguchi: Jurnal Ilmiah, 1(3), 632-644. https://doi.org/10.46306/tgc.v3i1.116

Pradana, A. Y., & Pulansari, F. (2021). Analisis Pengukuran Waktu Kerja Dengan Stopwatch Time Study untuk Meningkatkan Target Produksi di PT. XYZ. Juminten, 2(1), 13–24. https://doi.org/10.33005/juminten.v2i1.217

Prangawayu, N., Anto, F. J. L., & Simangunsong, J. Y. (2021). Analisis Kebutuhan Tenaga Kerja Optimal dengan Metode Work Load Analysis (WLA) pada Extruder Technician I di Departemen Produksi. Seminar Nasional Teknik Dan Manajemen Industri, 1(1), 120–127. https://doi.org/10.28932/sentekmi2021.v1i1.29

Purnomo, H., & Riani, L. P. (2018). Buku Optimasi Pengendalian Persediaan. In Hery Purnomo.

Rahayu, M., & Juhara, S. (2020). Pengukuran Waktu Baku Perakitan Pena Dengan Menggunakan Waktu Jam Henti Saat Praktikum Analisa Perancangan Kerja. Unistek, 7(2), 93–97. https://doi.org/10.33592/unistek.v7i2.650

Rahmawati, D., Puryani, & Nursubiyantoro, E. (2019). Optimalisasi Kapasitas Stasiun Kerja Dengan Penerapan Theory of Constraints (TOC). Jurnal Otimasi Sistem Industri, 12(1), 12. https://doi.org/10.31315/opsi.v12i1.2828

Riadi, E., & Suryati, A. (2023). Proses Penjadwalan Jangka Pendek Dengan Theory Constraint Asas Prioritas Bahan dan Alat yang Diproduksi Dalam Kegiatan Operasi Kamar Bedah di Rumah Sakit Umum Pekerja. Bussman Journal: Indonesian Journal of Business and Management, 3(2), 578–586. https://doi.org/10.53363/buss.v3i2.153

Rianti, H., Nafisah, L., & Nursubiyantoro, E. (2019). Pendekatan Theory of Constraints (Toc) Penjadwalan Flow Shop Pada Sistem Produksi Make To Order. Opsi, 12(1), 27. https://doi.org/10.31315/opsi.v12i1.2830

Rohman, A. S., & Muhammad, C. R. (2022). Peningkatan Throughput Garmen melalui Perbaikan Stasiun Kerja Bottleneck dengan Theory of Constraint. Jurnal Riset Teknik Industri, 2(2), 99–108. https://doi.org/10.29313/jrti.v2i2.1138

Saraswati D. (2016). Implementasi Theory of constraints Pada Upaya Peningkatan Kapasitas Produksi Olahan Bandeng. Bekasi. Teknik Industri. 3(6),208-213 https://doi.org/10.25105/JTI.V6I3.1545

Sekarningsih, P. E., & Hadining, A. F. (2022). Analisis Pengukuran Kerja Dalam Menentukan Waktu Baku Pada Operator Mesin Broaching Dengan Metode Pengukuran Waktu Jam Henti (Studi Kasus: PT XYZ). Jurnal Teknik Industri: Jurnal Hasil Penelitian dan Karya Ilmiah dalam Bidang Teknik Industri, 8(2), 175. https://doi.org/10.24014/jti.v8i2.19936

Simangungsonga, T., & Sitompul, D. (2023). Penerapan Theory Of Constraint Pada Distrubusi Bahan Baku Kayu Pt. Toba Pulp Lestari, Tbk. Jurnal Teknita, 2(1), 56-52. http://jurnalteknik.usxiitapanuli.ac.id

Sproull, B. (2019). Theory of Constraints, Lean, and Six Sigma Improvement Methodology Makin the Case for Integration. Routledge/Productivity Press. https://publisher.uthm.edu.my/periodicals/index.php/rmtb/article/view/1993

Sudiantini, D., Irvana, N., Natalia, N., & Furqon, M. (2023). Strategi Penyesuaian Orientasi Pada Industri-Industri Manufaktur Kota Bekasi. Jurnal Ekonomi, Manajemen, dan Akuntansi, 1(1), 44-54 http://jurnal.anfa.co.id/index.php/mufakat

Sugiatna, A. (2021). Analisis Perencanaan Kapasitas Produksi Dengan Menggunakan Metoda Rought Cut Capacity Planning Pendekatan Cpof di PT. Xyz. Sistemik: Jurnal Ilmiah Nasional Bidang Ilmu Teknik, 9(02), 28–32. https://doi.org/10.53580/sistemik.v9i02.61

Suwandi, Muhammad, C. R., & Amaranti, R. (2022). Pengurangan Work In Process Inventory di Stasiun Kerja Bottleneck Menggunakan Pendekatan Theory Of Constraint (TOC). Bandung Conference Series: Industrial Engineering Science, 2(1), 133–140. https://doi.org/10.29313/bcsies.v2i1.1956




DOI: http://dx.doi.org/10.22441/ijiem.v6i2.30907

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

IJIEM - Indonesian Journal of Industrial Engineering & Management
Program Pascasarjana Magister Teknik Industri Universitas Mercu Buana
Kampus Menteng - Gedung Tedja Buana, Floor 4th
Jl. Menteng Raya No. 29 Jakarta Pusat- Indonesia
Tlp.: +62 21 31935454 Fax: +62 21 31934474
http://publikasi.mercubuana.ac.id/index.php/ijiem

Email: [email protected]

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Web Analytics Made Easy - StatcounterView My Stats

The journal is indexed by: