Email this article 1.png){kind=logo}
.png)
.png)
.png)
Overall Equipment Effectiveness (OEE) Analysis to Minimize Six Big Losses in Continuous Blanking Machine
Abstract
This paper describes the high downtime on continuous blanking machines. The result is that companies suffer losses in cost, human resources, and time. Therefore, companies need to implement Total Productive Maintenance (TPM). TPM aims to improve the overall efficiency and effectiveness of manufacturing companies. Then the TPM itself needs to be evaluated. One of the methods used is the Overall Equipment Effectiveness (OEE) as an indicator of the machine's effectiveness by calculating the six big losses to determine the factors that influence the six factors of the six big losses. Based on research that has been done, the machine availability ratio is 99%, performance efficiency is 84%, product rate of quality is 83%. While the value obtained on the OEE calculation is 71%, the value is below the world's ideal OEE standard value of > 85%. The highest loss values for six big losses are idle and minor stoppage losses with a percentage of 62.73%, setup and adjustment losses of 14.38%.
Keywords
Full Text:
PDFReferences
Davis, R K. (1995). Productivity Improvement Through TPM. Prentice Hall : London
Garza-Reyes, J. A. (2015). From measuring overall equipment effectiveness (OEE) to overall resource effectiveness (ORE). Journal of Quality in Maintenance Engineering, 21(4), 506-527. https://doi.org/10.1108/JQME-03-2014-0014
Nakajima, S. (1988). Introduction to Total Productive Maintenance, Productivity Press Inc, p. 21 : Portland
Stamatis, D.H. (2010). The OEE Primer: Understanding Overall Equipment. Taylor and Francis Group : New York
Supriyadi, S., Ramayanti, G., & Afriansyah, R. Analisis Total Productive Maintenance Dengan Metode Overall Equipment Effectiveness Dan Fuzzy Failure Mode and Effects Analysis. Sinergi: Jurnal Teknik Mercu Buana, 21(3), 165-172. http://dx.doi.org/10.22441/sinergi.2017.3.002
Tsarouhas, P. (2019). Improving operation of the croissant production line through overall equipment effectiveness (OEE): A case study. International Journal of Productivity and Performance Management, 68(1), 88-108. https://doi.org/10.1108/IJPPM-02-2018-0060
Tsarouhas, P. H. (2013). Evaluation of overall equipment effectiveness in the beverage industry: a case study. International Journal of Production Research, 51(2), 515-523. https://doi.org/10.1080/00207543.2011.653014
Watson, G. (2004). The Legacy Of Ishikawa. Quality Progress 37(4) , 54-47. https://search.proquest.com/openview/aa8d84108ce578a570cffcda68e9c5ef/1?pq-origsite=gscholar&cbl=34671
Wahid, A., & Agung, R. (2016). Perhitungantotal Produktifitas Maintenance (TPM) pada Mesin Bobin dengan Pendekatan Overall Equipment Effectivenes (OEE) di PT. XY. JKIE (Journal Knowledge Industrial Engineering), 3(3), 40-49. https://jurnal.yudharta.ac.id/v2/index.php/jkie/article/view/873
Wiguna, and Windi. (2013). System Repair Design for Total Productive Maintenance In PT. XYZ, Skripi. Jurusan Teknik Industri, Universitas Sumatera Utara. http://repositori.usu.ac.id/handle/123456789/3005
DOI: http://dx.doi.org/10.22441/ijiem.v1i1.8037
Refbacks
- There are currently no refbacks.
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
IJIEM - Indonesian Journal of Industrial Engineering & Management
Program Pascasarjana Magister Teknik Industri Universitas Mercu Buana
Kampus Menteng - Gedung Tedja Buana, Floor 4th
Jl. Menteng Raya No. 29 Jakarta Pusat- Indonesia
Tlp.: +62 21 31935454 Fax: +62 21 31934474
http://publikasi.mercubuana.ac.id/index.php/ijiem
Email: [email protected]
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
The journal is indexed by:
