Perancangan Safety Device pada Pinion Gear Mesin Curing Ban Berbasis PLC Mitsubishi
DOI:
https://doi.org/10.22441/jte.2022.v13i2.001Keywords:
Mesin Curing, Pinion Gear, PLC, Safety Device, SensorAbstract
Mesin curing adalah mesin yang digunakan untuk memasak ban. Mesin curing yang digunakan merupakan mesin curing dengan tipe BOM (Bag O Matic) yaitu mesin curing dengan sistem penggerak pinion gear yang digerakkan oleh motor. Sistem penggerak ini memiliki kelemahan salah satunya adalah kegagalan pada komponen main drive. Salah satu kegagalan komponen main drive yaitu pecahnya pinion gear. Pecahnya pinion gear dapat mengakibatkan kerusakan mekanik yang lebih parah dan menimbulkan potensi kecelakaan kerja jika saat itu mesin tidak cepat dimatikan. Maka dari itu diperlukannya sistem pendeteksi pecahnya pinion gear agar tidak menyebabkan kerusakan mekanik yang semakin besar dan mencegah timbulnya potensi kecelakaan kerja. Adapun PLC, proximity dan HMI adalah alat yang digunakan untuk merancang sistem kontrol safety device. Setelah dilakukan simulasi sebanyak 3 kali, hasil dari perancangan ini adalah sistem berhasil berjalan dan seluruh komponen bekerja dengan baik. Nilai yang ditampilkan pada PLC sesuai dengan nilai yang dideteksi oleh sensor. Kesimpulan didasarkan pada kesesuaian pulsa yang dikirim oleh sensor ke PLC yang nilainya ditampilkan oleh laptop. Dalam penelitian ini, plat encoder memilki 8 lubang dalam 1 siklus perhitungan, maka akan menghasilkan 8 pulse. Ketika sensor tidak dipasang, tidak ada pulsa yang terhitung.Downloads
References
“Peraturan Pemerintah Republik Indonesia Nomor 50 Tahun 2012 Tentang Penerapan Sistem Manajemen Keselamatan Dan Kesehatan Kerja,” p. 262, 2012.
A. I. Pangestu, M. Asmi, E. Suryadi, and M. Asmi, “Pengaruh Kualitas Produk Ban Terhadap Kepuasan Konsumen Di Distributor Griya Ban Bridgestone Pada PT . Bridgestone Tire,” vol. 1, no. 1, pp. 49–56, 2017.
H. Hermanto and E. Wiratmani, “Analisis Reject Gagal Curing Valve Terjepit Pada Produk Ban Luar Pt Suryaraya Rubberindo Industries Dengan Metode Six Sigma Dan Fmea,” IKRA-ITH Teknol. J. Sains Teknol., vol. 3, no. 1, pp. 15–25, 2019, [Online]. Available: https://journals.upi-yai.ac.id/index.php/ikraith-teknologi/article/view/336.
Æ. Tam and Œ. Tam, “Perencanaan Gear Box Dan Analisis Statik Rangka Conveyor Menggunakan Sofware Catia V5,” Perenc. Gear Box Dan Anal. Statik Rangka Conveyor Menggunakan Sofware Catia V5, pp. 5–7, 2014.
F. Mustaqim, W. Kosasih, and A. Ahnad, “Pemeliharaan Mesin Hydraulic Shear Menggunakan Pendekatan Reliability Centered Maintenance dan Manajemen Suku Cadang,” J. Rekayasa Sist. Ind., vol. 9, no. 3, pp. 153–162, 2020, doi: 10.26593/jrsi.v9i3.4023.153-162.
W. D. Putro and A. S. Ardjo, “Analisis Kerusakan Middle Axle,” J. Rekayasa Mesin Politek. Negeri Semarang, vol. 9, pp. 11–19, 2014, doi: http://dx.doi.org/10.32497/rm.v9i1.442.
T. H. Febriana, Hernadewita, C. Hermawan, and H. Herlambang, “Perbaikan Ketahanan Lifetime Bladder untuk Peningkatan Curing Efficiency pada Proses Industri Tire Manufacture,” IJIEM (Indonesian J. Ind. Eng. Manag., vol. 1, no. 1, pp. 33–44, 2020, [Online]. Available: https://www.researchgate.net/profile/Hendi-Herlambang/publication/350041106_Perbaikan_Ketahanan_Lifetime_Bladder_untuk_Peningkatan_Curing_Efficiency_pada_Proses_Industri_Tire_Manufacture/links/604cdc06a6fdcccfee7ceeee/Perbaikan-Ketahanan-Lifetime-Bladder-.
F. Muliawati and R. Wahyudi, “Penerapan Plc Mitsubishi Fx 2N - Series Sebagai Pengganti Seltime-1000 Untuk Kontrol Timer Proses Produksi Ban Pada Mesin Tire Curing Press,” J. Tek. Elektro dan Sains Univ. Ibn Khaldun Bogor, vol. 1, no. 1, pp. 14–21, 2014, doi: http://dx.doi.org/10.32832/juteks.v1i1.742.
D. M. Chandra Mufti, “Perencanaan Penjadwalan Preventive Maintenance Pada Mesin Curing Tipe Allwell Di PT. X,” Pros. Semin. Nas. Tek. Mesin PNJ, pp. 377–382, 2017.
H. Budi Harja and N. Ahmad Nugraha, “Usulan Pembaharuan jadwal Kegiatan Preventive Maintenance pada Mesin Curing PCR PT.XYZ Menggunakan Metoda Distribusi Weibull,” J. Teknol. dan Rekayasa Manufaktur, vol. 1, no. 1, pp. 23–35, 2019, doi: 10.48182/jtrm.v1i1.3.
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
