Pengendalian Arm Robot Berbasis Invers Kinematics Menggunakan Metode ANN
DOI:
https://doi.org/10.22441/jte.2025.v16i3.001Keywords:
Arm Robot, End effector, Error, ANN, Inverse kinematics, Kontrol RobotAbstract
Fokus penelitian ini adalah untuk mengkomparasi hasil kinerja pengendalian pergerakan lengan robot yang menggunakan ANN dengan ANN + Inverse kinematics. Diharapkan metode ini dapat meningkatkan akurasi dan stabilitas sistem kontrol pada robot, yang merupakan tantangan utama dalam bidang robotika. Dalam penelitian ini, dua pendekatan pengendalian diuji, yaitu metode Normal dan metode Inverse kinematics yang ditambahkan, untuk membandingkan respons sistem berdasarkan parameter kesalahan dan kinerja kontrol. Parameter yang dianalisis mencakup Overshoot, Rise Time, Max Amplitudo, serta empat kriteria error yaitu Integral of Absolute Error, Integral of Time-weighted Absolute Error, Integral of Squared Error, dan Integral of Time-weighted Squared Error. Hasil eksperimen menunjukkan bahwa metode Inverse kinematics lebih unggul dalam mengurangi kesalahan absolut keseluruhan dan meningkatkan kestabilan jangka panjang, yang ditunjukkan oleh nilai IAE dan ITAE yang lebih rendah dibandingkan dengan metode Normal. Selain itu, Inverse kinematics berhasil mengurangi overshoot secara signifikan (0,510%) dibandingkan dengan metode Normal (93,889%), meskipun memerlukan waktu yang lebih lama untuk mencapai posisi target. Namun, metode Normal menunjukkan respons yang lebih cepat dengan rise time yang lebih pendek serta nilai ISE dan ITSE yang lebih rendah, meskipun kestabilan jangka panjangnya tidak sebaik Inverse kinematics. Penelitian ini memberikan wawasan tentang keseimbangan antara kecepatan respons dan kestabilan dalam desain sistem pengendalian robot, serta berkontribusi pada pengembangan algoritma kontrol berbasis Inverse kinematics dan ANN untuk aplikasi robotika yang memerlukan akurasi tinggi dan kestabilan jangka panjang.
Downloads
References
.[1] A. Andrian, R. Rahmadewi, and I. A. Bangsa, “ARM ROBOT PEMINDAH BARANG (AtwoR) MENGGUNAKAN MOTOR SERVO MG995 SEBAGAI PENGGERAK ARM BERBASIS ARDUINO,” Electro Luceat, vol. 6, no. 2, pp. 142–155, 2020, doi: 10.32531/jelekn.v6i2.226.
F. Faqri, W. Amaral, and J. Subur, “Implementasi Metode PID dan Inverse kinematics pada Pergerakan Robot Berkaki Enam ( Hexapod ),” pp. 17–22.
M. H. Maftuh, “E-JOINT ( Electronica and Electrical Journal of Innovation Technology) Lengan Robot Pemindah Barang Berdasarkan Ukuran Tinggi,” vol. 01, no. 2, pp. 36–41, 2020.
I. Al Ashfahani, Y. Sofyan, and S. Yahya, “Rancang Bangun Lengan Robot Penyortir Benda Kerja Berdasarkan Warna Dengan Pengendalian Kestabilan Cahaya Menggunakan Fuzzy logic,” Pros. Ind. Res. Work. Natl. Semin., vol. 13, no. 01, pp. 353–362, 2022.
R. Z. A. Zurendra, R. Maulana, and H. Fitriyah, “Implementasi Inverse kinematics Pada Robot Lengan Untuk Pengambilan Benda Dengan Koordinat Awal Acak,” … Teknol. Inf. dan Ilmu …, vol. 4, no. 2, 2020, [Online]. Available: http://j-ptiik.ub.ac.id/index.php/j-ptiik/article/view/7008
Y. Chen, J. Wu, C. He, and S. Zhang, “Intelligent Warehouse Robot Path Planning Based on Improved Ant Colony Algorithm,” IEEE Access, vol. 11, no. January, pp. 12360–12367, 2023, doi: 10.1109/ACCESS.2023.3241960.
J. Wang, Y. Zhu, R. Qi, X. Zheng, and W. Li, “Adaptive PID control of multi-DOF industrial robot based on neural network,” J. Ambient Intell. Humaniz. Comput., vol. 11, no. 12, pp. 6249–6260, 2020, doi: 10.1007/s12652-020-01693-w.
A. Z. Rahman, ST, MT and K. Jauhari, “Perhitungan Inverse kinematics dan Pengukuran Akurasi Pergerakan pada Robot Manipulator Lengan,” J. Tek. Mesin ITI, vol. 3, no. 2, p. 53, 2019, doi: 10.31543/jtm.v3i2.339.
I. H. AYEGA, T. A. TAMBA, and B. M. ARTHAYA, “Rancang Bangun Purwarupa Manipulator Lengan Robot Dengan Tiga Derajat Kebebasan,” ELKOMIKA J. Tek. Energi Elektr. Tek. Telekomun. Tek. Elektron., vol. 11, no. 3, p. 796, 2023, doi: 10.26760/elkomika.v11i3.796.
M. K. Ciliz, “Adaptive control of robot manipulators with neural network based compensation of frictional uncertainties,” Robotica, vol. 23, no. 2, pp. 159–167, 2005, doi: 10.1017/S026357470400075X.
J. Lu, T. Zou, and X. Jiang, “A Neural Network Based Approach to Inverse kinematics Problem for General Six-Axis Robots,” Sensors, vol. 22, no. 22, pp. 1–19, 2022, doi: 10.3390/s22228909.
A. Gholami, T. Homayouni, R. Ehsani, and J. Q. Sun, “Inverse kinematic control of a delta robot using neural networks in real-time,” Robotics, vol. 10, no. 4, 2021, doi: 10.3390/robotics10040115.
A. R. J. Almusawi, L. C. Dülger, and S. Kapucu, “A New Artificial Neural Network Approach in Solving Inverse kinematics of Robotic Arm (Denso VP6242),” Comput. Intell. Neurosci., vol. 2016, 2016, doi: 10.1155/2016/5720163.
S. Chen and J. T. Wen, “Industrial robot trajectory tracking control using multi-layer neural networks trained by iterative learning control,” Robotics, vol. 10, no. 1, pp. 1–20, 2021, doi: 10.3390/robotics10010050.
A. Sambas and D. Setia Rahayu, “Rancang Bangun Robot Arm 2 Dof Berbasis Adaptive Neuro-Fuzzy Inference System (Anfis),” Al Jazari J. Mech. Eng., vol. 3, no. 2, pp. 41–45, 2018.
T. Pangaribuan, S. Hutauruk, and J. Sihombing, “Desain Prototipe Robot Satu Lengan Dengan Tiga Tingkat Kebebasan Bergerak Berbasis Arduino Dengan Sensor Jarak Pada Bluetooth Smartphone,” J. ELPOTECS, vol. 4, no. 1, pp. 46–53, 2021, doi: 10.51622/elpotecs.v4i1.453.
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
