Analisa Kendali Dan Pemantauan Pintu Perlintasan Kereta Api Berbasis IoT (Internet Of Things) Menggunakan Aplikasi MIT Inventor
DOI:
https://doi.org/10.22441/jte.v10i3.001Abstract
Kereta Api merupakan transportasi umum yang banyak digunakan masyarakat di Indonesia karena, dengan Kereta Api masyarakat dapat terhindar dari kemacetan dan juga harganya pun terjangkau. Namun pintu perlintasan Kereta Api di Indonesia memang masih sangat kurang fasiltas di bagian kendali dan pemantauan keamanan perlintasan kereta api sehingga petugas pos yang bekerja mengalami kesulitan untuk memantau keamanan di area perlintasan kereta api. Pada perancangan akan dibuat sebuah alat kendali dan pemantauan secara manual dan berkala yang akan terpantau melalui Android yang terhubung dengan Database Firebase agar dapat membantu petugas pos dan masinis untuk mengupayakan pengurangan angka kecelakaan di pintu perlintasan kereta api. Petugas pos dan masinis hanya cukup memantau pada Smartphone Android yang terkoneksi dengan internet. Dari pengujian dapat disimpulkan purwarupa kendali dan pemantauan pintu perlintasan kereta api berbasis IoT menggunakan Aplikasi MIT Inventor dapat bekerja ketika sensor RFID bergerak dengan kecepatan rata – rata 12,55 cm/detik yang akan mentrigger motor servo serta kendaraan yang mentrigger sensor ultrasonik yang berada di palang pintu perlintasan kereta api dan dapat langsung terhubung dengan mikrokontroler NodeMcu dengan menggunakan aplikasi MIT Inventor yang akan langsung diolah oleh Firebase sebagai realtime database. Pada aplikasi MIT Inventor akan menampilkan situasi palang dan keramaian yang ada di area palang pintu perlintasan. Smartphone dan mikrokontroler akan selalu terhubung dengan internet.
Kata Kunci: Aplikasi MIT Inventor, Firebase, Internet of Things, Motor Servo, Ultrasonik, RFID
Downloads
References
K. A. Theja, M. Kumaresan, and K. S. Kumar. “Automated Unmanned Railway Level Crossing System Using WSN”. International Journal of Innovative Research in Computerand Communication Engineering. Vol. 3, Issue 11, 2015
G. Leena., C. S. Vidawat and N. Jha. “Automatic Railway System”. International Journal of Computer Applications. Vol. 159, No. 8, 2017.
A. M. Kottalil, Abhijith, M. M. Ajmal, L. J. Abhilash and Ajith Babu. “Automatic Railway Gate Control System”. International Journal of Innovative Research in Computerand Communication Engineering. Vol 3, Issue 2, 2014.
A. S. Mahdi and Al-Zuhairi. “Automatic Railway Gate and Crossing Control based Sensors & Microcontroller”. International Journal of Computer Trends and Technology. Vol 4, issue 7, 2013.
H. Djamal. “Radio Frequency Identification (RFID) Dan Aplikasinya”. Jurnal Tesla. Vol. 16, No. 1, 2014.
B. Nugraha, Yudistiro, D. W. Astuti dan S. Budiyanto. “Perancangan Dan Pengujian Miniatur Lift Berbasis Arduino Dengan Menggunakan RFID Sebagai Sistem Identifikasi Lantai”. Sinergi. Vol 19. No. 3, 2015
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
