Perancangan BAS Berbasis PLC Outseal dan Haiwell SCADA untuk Monitoring dan Kontrol Fasilitas Gedung
DOI:
https://doi.org/10.22441/jte.2026.v17i3.004Abstract
Building Automation System (BAS) merupakan teknologi yang digunakan untuk mengintegrasikan sistem monitoring dan kontrol berbagai fasilitas gedung secara otomatis sehingga dapat meningkatkan efisiensi energi, keamanan, dan kenyamanan operasional. Penelitian ini bertujuan merancang dan mengimplementasikan Building Automation System berbasis PLC Outseal dan SCADA Haiwell untuk mengontrol sistem pencahayaan, distribusi air otomatis, serta monitoring energi listrik pada gedung. Metode penelitian yang digunakan adalah Research and Development (R&D) yang meliputi tahap analisis kebutuhan, perancangan sistem, implementasi perangkat keras dan perangkat lunak, serta pengujian sistem. PLC Outseal digunakan sebagai pengendali utama sedangkan SCADA Haiwell digunakan sebagai media monitoring dan kontrol secara real-time. Hasil implementasi menunjukkan bahwa sistem mampu mengontrol pencahayaan pada beberapa area gedung, mengoperasikan pompa air secara otomatis berdasarkan level air tangki, serta melakukan monitoring parameter energi listrik secara terpusat. Hasil pengujian komunikasi menunjukkan bahwa penggunaan catu daya 24V memberikan performa yang lebih stabil dibandingkan 12V dengan delay komunikasi rata-rata sekitar 1 detik. Sistem yang dirancang berhasil meningkatkan efektivitas pengelolaan fasilitas gedung serta mendukung konsep smart building yang hemat energi dan mudah dikendalikan.
Downloads
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
