Smart Hidroponik Sistem Rakit Apung Mengontrol pH (Potential Hydrogen) Tanaman Pakcoy Secara Otomatis
DOI:
https://doi.org/10.22441/jte.2023.v14i3.007Kata Kunci:
Pakcoy, Floating raft hydroponics, Automatic pH controlAbstrak
Sistem rakit apung adalah salah satu sistem hidroponik yang paling mudah di buat, sistem rakit apung memiliki masalah yang cukup kompleks dikarenakan air yang tenang dan tidak mengalami sirkulasi air yang membuat kandungan pH menjadi turun. Pada penelitian ini, rancangan kontrol pH otomatis pada sistem hidroponik rakit apung bertujuan untuk membantu meminimalisir penurunan pH. Dengan metode close loop alat dapat bekerja secara otomatis terus menerus ,dan bantuan IoT petani hidroponik dapat mengontrol pH dari jarak jauh. Hasil pembacaan dari sensor pH telah berhasil di tampilkan dalam smartphone dan dapat dikontrol dari jarak jauh menggunakan Blynk IoT dengan ke akurasian error ±1,65%. Pengujian kontrol otomatis lebih efisien dan cepat dengan penstabilan pH dalam kurun waktu ±1 menit untuk menuju setpoint yang diinginkan tanaman pakcoy. Dari hasil simulasi dapat disimpulkan bahwa tanaman tidak boleh berada di pH yang rendah, dan pengendalian pH otomatis ini sangat efektif untuk membuat pH menjadi stabilUnduhan
Referensi
I. T. Bachrens, Eating Clean Makan Sehat Itu Mudah. Jakarta: Kawan Pustaka, 2019.
U. Prastio, Panen Sayuran Hidroponik Setiap Hari. Jakarta: AgroMedia, 2015.
G. Rasul, “Managing the food, water, and energy nexus for achieving the Sustainable Development Goals in South Asia,” Environ. Dev., vol. 18, no. December 2015, pp. 14–25, 2016, doi: 10.1016/j.envdev.2015.12.001.
D. Pancawati and A. Yulianto, “Implementasi Fuzzy Logic Controller untuk Mengatur Ph Nutrisi pada Sistem Hidroponik Nutrient Film Technique (NFT),” J. Nas. Tek. Elektro, vol. 5, no. 2, p. 278, 2016, doi: 10.25077/jnte.v5n2.284.2016.
I. A. Rozaq and Y. N. D. Setyaningsih, “Karakterisasi dan kalibarasi sensor ph menggunakan arduino uno 12,” Prosidng SENDI_U, pp. 244–247, 2018.
Y. Efendi, “Internet Of Things (Iot) Sistem Pengendalian Lampu Menggunakan Raspberry Pi Berbasis Mobile,” J. Ilm. Ilmu Komput., vol. 4, no. 2, pp. 21–27, 2018, doi: 10.35329/jiik.v4i2.41.
F. Rahmah, F. Hidayanti, and M. Innah, “Penerapan Smart Sensor untuk Kendali pH dan Level Larutan Nutrisi pada Sistem Hidroponik Tanaman Pakcoy,” J. Teknol. Inf. dan Ilmu Komput., vol. 6, no. 5, p. 527, 2019, doi: 10.25126/jtiik.2019651738.
A. W. Dani, “Optimalisasi Pertumbuhan Pada Sayuran Hidroponik Nutrient Film Technique Dengan Metode Fuzzy Logic Berbasis Internet of Things,” Jurnal Teknologi Elektro, vol. 11, no. 1, 2020, doi: https://doi.org/10.22441/jte.2020.v11i1.001.
A. D. Purwanto, F. Supegina, and T. M. Kadarina, “Sistem Kontrol Dan Monitor Suplai Nutrisi Hidroponik Sistem Deep Flow Technique (DFT) Berbasis Arduino NodeMCU Dan Aplikasi Android,” Jurnal Teknologi Elektro, vol. 10, no. 3, 2019, doi: https://doi.org/10.22441/jte.v10i3.002.
J. Andika, E. Permana, and S. Attamimi, “Perancangan Sistem Otomatisasi dan Monitoring Perangkat Perawatan Tanaman Hias Berbasis Internet of Things,” Jurnal Teknologi Elektro, vol. 13, no. 2, pp. 100–100, May 2022, doi: https://doi.org/10.22441/jte.2022.v13i2.007.
Unduhan
File Tambahan
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
