Comparison of 5G Network Throughput on Varying Cluster Size
DOI:
https://doi.org/10.22441/jte.2024.v15i1.004Kata Kunci:
Cluster size, Network, Throughput, 5GAbstrak
Abstract – The development of cellular technology is accelerating, as is the exponential increase in data traffic, resulting in the creation of the following technology, namely 5G. This study looks at the throughput of the 5G network in various cluster sizes. In this study, integer frequency reuse (IFR) with a bandwidth of 100 MHz and a frequency of 3.5 GHz was used. The path loss Urban Macro (UMa) based on 3GPP 38.901 is employed in this study. The data was assessed and compared using computer simulations, and a comparison of throughput CDF values for each cluster size was obtained. When CDF = 0.9, the throughput of the N = 3 scenario is 6480 bps, which is greater than the huge throughput of the N = 4 scenario of 4860 bps and the large throughput of the N = 7 scenario of 2777 bps. According to the simulation, the cell with N = 3 cluster size has a greater throughput than the other scenarios. The cell with the smallest cluster size had the maximum throughput, whereas the largest had the lowest.
Unduhan
Referensi
W. S. H. M. W. Ahmad et al., “5G Technology: Towards Dynamic Spectrum Sharing Using Cognitive Radio Networks,” IEEE Access, vol. 8, pp. 14460–14488, 2020, doi: 10.1109/ACCESS.2020.2966271.
F. Hu, B. Chen, and K. Zhu, “Full Spectrum Sharing in Cognitive Radio Networks Toward 5G: A Survey,” IEEE Access, vol. 6, pp. 15754–15776, 2018, doi: 10.1109/ACCESS.2018.2802450.
B. Xie, Z. Zhang, R. Q. Hu, G. Wu, and A. Papathanassiou, “Joint Spectral Efficiency and Energy Efficiency in FFR-Based Wireless Heterogeneous Networks,” IEEE Trans. Veh. Technol., vol. 67, no. 9, pp. 8154–8168, Sep. 2018, doi: 10.1109/TVT.2017.2701356.
S. H. Lee, M. Kim, H. Shin, and I. Lee, “Belief Propagation for Energy Efficiency Maximization in Wireless Heterogeneous Networks,” IEEE Trans. Wireless Commun., vol. 20, no. 1, pp. 56–68, Jan. 2021, doi: 10.1109/TWC.2020.3023079.
A. I. Zreikat and S. Mercan, “Performance Study of 5G Downlink Cell,” in Internet of Things, Smart Spaces, and Next Generation Networks and Systems, vol. 11660, O. Galinina, S. Andreev, S. Balandin, and Y. Koucheryavy, Eds., in Lecture Notes in Computer Science, vol. 11660. , Cham: Springer International Publishing, 2019, pp. 377–389. doi: 10.1007/978-3-030-30859-9_32.
Y. Huo, X. Dong, and W. Xu, “5G Cellular User Equipment: From Theory to Practical Hardware Design,” IEEE Access, vol. 5, pp. 13992–14010, 2017, doi: 10.1109/ACCESS.2017.2727550.
G. R. Maccartney, T. S. Rappaport, S. Sun, and S. Deng, “Indoor Office Wideband Millimeter-Wave Propagation Measurements and Channel Models at 28 and 73 GHz for Ultra-Dense 5G Wireless Networks,” IEEE Access, vol. 3, pp. 2388–2424, 2015, doi: 10.1109/ACCESS.2015.2486778.
T. Curry and R. Abbas, “5G Coverage, Prediction, and Trial Measurements,” 2020, doi: 10.48550/ARXIV.2003.09574.
T. S. Rappaport et al., “Millimeter Wave Mobile Communications for 5G Cellular: It Will Work!” IEEE Access, vol. 1, pp. 335–349, 2013, doi: 10.1109/ACCESS.2013.2260813.
M. Zahid, S. Shoaib, and M. Rizwan, “Design of MIMO Antenna System for 5G Indoor Wireless Terminals,” in 2019 International Conference on Engineering and Emerging Technologies (ICEET), Lahore, Pakistan: IEEE, Feb. 2019, pp. 1–4. doi: 10.1109/CEET1.2019.8711818.
M. Yaser, R. P. Astuti, and. A. F., “Pengaruh Posisi Penyebaran Femtocell Pada Implementasi LTE Femto yang Terintegrasi Dengan Jaringan GSM,” JETT, vol. 5, no. 2, p. 703, Mar. 2019, doi: 10.25124/jett. v5i2.1809.
Unduhan
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
