ANALISIS PENGARUH SUMBU RODA TERHADAP RADIUS BELOK PADA MOTOR LISTRIK E-NIAGA GENI BIRU 3 RODA
Abstract
Keywords
Full Text:
PDF (Bahasa Indonesia)References
W. Pulungan, P. Poningsih, and H. Satria, “Pengelompokkan Pada Kendaraan Bermotor Menurut Kegunaannya Menggunakan Metode Data Mining K-Means,” KOMIK (Konferensi Nas. Teknol. Inf. dan Komputer), vol. 3, no. 1, pp. 746–752, 2019, doi: 10.30865/komik.v3i1.1687.
J. R. Woo, H. Choi, and J. Ahn, “Well-to-wheel analysis of greenhouse gas emissions for electric vehicles based on electricity generation mix: A global perspective,” Transp. Res. Part D Transp. Environ., vol. 51, pp. 340–350, 2017, doi: 10.1016/j.trd.2017.01.005.
M. Aziz, Y. Marcellino, I. A. Rizki, S. A. Ikhwanuddin, and J. W. Simatupang, “Studi Analisis Perkembangan Teknologi Dan Dukungan Pemerintah Indonesia Terkait Mobil Listrik,” TESLA J. Tek. Elektro, vol. 22, no. 1, p. 45, 2020, doi: 10.24912/tesla.v22i1.7898.
R. Harsyawina, Alfian, “Analisis Stabilitas Kendaraan dan Kekuatan Pengait Bak Angkut Kendaraan Multiguna Pedesaan,” Tek. mesin, 2017.
F. Maulana, “Konsep Desain Kendaraan Listrik Roda Tiga Ramah Lingkungan Design Concept Three-Wheeled Electrical Vehicles That Are Environmentally Friendly,” vol. 10, pp. 107–116, 2016.
F. Rahman, “Analisis Stabilitas Arah Mobil Toyota Agya G dengan Variasi Jumlah Penumpang, Kecepatan Belok, Sudut Belok dan Kemiringan Melintang Jalan,” J. Tek. ITS, vol. 6, no. 1, 2016, doi: 10.12962/j23373539.v6i1.22170.
P. Gautam, S. Sahai, S. S. Kelkar, P. S. Agrawal, and M. R. D, “Designing Variable Ackerman Steering Geometry for Formula Student Race Car,” Int. J. Anal. Exp. Finite Elem. Anal., vol. 8, no. 1, 2021, doi: 10.26706/ijaefea.1.8.20210101.
Y. Mitiku, D. Thomas, F. Mersha, F. Hailu, and E. Semeredin, “Parking , Zero Turning Radius , Minimum Turning Radius with,” Sci. Technol. Arts Res. J., vol. 7522, no. March, pp. 88–94, 2016.
P. Deepak, S. V. Reddy, N. Ramya, M. B. Goud, and K. C. Shekar, “Design and Analysis of Three Wheeled Dual Steering Vehicle,” Int. J. Eng. Res. Technol., vol. 3, no. 4, pp. 36–42, 2014.
G. Mezitama, “Perancangan sistem kemudi dan sudut slip ban pada kendaraan hemat energi (Studi pada kendaraan mesin berkapasitas 100 CC),” Tek. Mesin pada Fak. Tek. Univ. Negeri jakarta, 2014.
DOI: http://dx.doi.org/10.22441/jtm.v12i3.16098
Refbacks
- There are currently no refbacks.
Copyright (c) 2023 Jurnal Teknik Mesin
Jurnal Teknik Mesin (JTM)
Program Studi Teknik Mesin, Fakultas Teknik, Universitas Mercu Buana
Jl. Meruya Selatan No. 01, Kembangan, Jakarta Barat 11650, Indonesia
Email: [email protected]
Telp.: 021-5840815/ 021-5840816 (Hunting)
Fax.: 021-5871335
JTM is indexed by the following abstracting and indexing services:
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.