RESEARCH REVIEW ON THE DESIGN OF FLOW LOSS TEST EQUIPMENT IN PIPE INSTALLATIONS

Muhammad Afif Fadila, Roni Afrian, Muhamad Fitri

Abstract


This literature review study is motivated by the important role of the piping system in determining production results in an industry. The fluid flowing through the piping system experiences instability, resulting in Head Losses. As a result, the fluid pressure is lower than desired, resulting in suboptimal system performance. The aim of this study is to identify a research gap concerning a review of the design of Head Losses test equipment that has been made by previous researchers. The analysis was conducted by literature review using the systematic literature review (SLR) method. Based on a review from 30 journal, it was found that to design a head losses test equipment in a pipe installation, a person must have a basic knowledge of fluid mechanics. Furthermore, an understanding of the function of pumps, pipe installations, pressure gauges, and measuring instruments that are part of the functional system in this test equipment is required. These are the author's references for designing flow loss test equipment that will be used in the Mechanical Engineering Laboratory at Mercu Buana University's Faculty of Engineering.

Keywords


Fluid, head losses, major losses, minor losses, pipe

Full Text:

PDF

References


Eswanto & Dian, S. Analisa Distribusi Kapasitas Aliran Fluida Di Daerah Percabangan Pada Sistem Perpipaan. Jurnal Teknologi Penerapan, Vol.3, No.1, Pp. 7-11. Mar. 2017.

Ubaedilah. Analisa Kebutuhan Jenis Dan Spesifikasi Pompa Untuk Suplai Air Bersih Di Gedung Kantin Berlantai Tiga Pt. Astra Daihatsu Motor. Jurnal Teknik Mesin, Vol. 5, No. 3, Pp. 119-127. 2016.

Ismet, E.P, Sulaiman & Ari, Galsha. Analisa Rugi Aliran (Head Losses) Pada Belokan Pipa

Pvc. Seminar Nasional Peranan Ipteks Menuji Industri Masa Depan. Jul. 2017.

Dery, Krisdwiyanto. & Andi, M.A.. Pengujian Alat Uji Rugi-Rugi Aliran Dalam Pipagalvanis, Pipa Pvs, Pipa Stainless Steel Dan Pipa Acrylic. Zona Mesin,Vol. 8, No.2. Aug. 2017.

Dwi, Ermadi., & Darmanto. Perancangan Alat Praktikum Pengujian Headloss Aliran Fluida Tak Termampatkan. Jurnal Ilmiah Cendekia Eksakta, Vol.2, No.2. 2017.

Eko, A.C., Sutomo, Ns. &, Aris, H. Literature Review: Panduan Penulisan Dan Penyusunan. Jurnal Keperawatan, Vol.12, No.2. Aug. 2019.

Guillaume, Lame. Systematic Literature Reviews: An Introductio’. International Conference On Engineering Design (Iced19), Vol 1, No.1, Pp. 1633-1642. Jul. 2019.

Nefli, Yusuf., & Hariadi. Analisis Hasil Percobaan Alat Praktikum Rugi Rugi Aliran Dalam Pipa. Rang Teknik Jurnal, Vol.4, No.1. 2021.

Sepfitrah & Yose, Rizal. Analisis Pressure Drop Pada Instalasi Pipa Alat Uji Rugi Rugi Aliran Menggunakan Cfd Fluent 6.0. Jurnal Aptek, Vol. 5, No. 1, Pp. 45-56. Oct.2013.

Tabah, Priangkoso & Dwi, Ermadi. Perancangan Alat Praktikum Uji Kerugian Tekanan Aliran Air Dalam Pipa. Momentum,Vol.18, No.1, Pp.5-11. Apr. 2022.

Darmulia, Darmulia & Rahman, Fadhli & Ismail, Ismail & Burhan, Rizal. Analisis Pengaruh Perubahan Katup Pada Pipa Galvanis Dan Stainless Terhadap Kerugian Head. Iltek : Jurnal Teknologi. Vol.16, No.2, Pp.65-69. 2021.

Nur, Hayati., Adi, Purwanto., Erwan, Muladi. Pengaruh Diameter Knee Pada Head Loss Aliran Berbasis Monogram, Cad Dan Cae. Journal Of Mechanical Engineering, Manufactures, Materials And Energy, Vol.5, No.2, Pp.194-201. Dec. 2021.

R. Bachrun., Et.Al. The Effect Of Discharge On Head Loss With Straight And Bend Flow Directions In The Pipeline. Iop Conf. Series: Earth And Environmental Science, Vol. 841. Aug. 2020.

Sudirman. Major And Minor Head Losses Analysis On The Piping System In Pondok Pesantren Tahfizhul Qur'an Ibnu Abbas Tarakan. Journal Of Applied Electrical & Technology, Vol. 3, No. 1. Mar. 2021.Aline, A,M. Major And Minor Head Losses In A Hydraulic Flow Circuit: Experimental Measurements And A Moody's Diagram Application. Eclética Química, Vol.45, No.3, Pp. 47-56. Jul. 2020.

Achour, B. & Amara, L. Head Loss Computation In A Divergent Circular Pipe : Circular Pipe Calcul De La Perte De Charge Dans Une Conduite Circulaire Divergente. Larhyss Journal, Pp.45-65. Dec. 2019.

Arasy, F. & Mulyadi. Rancangan Bangun Alat Uji Headlosses Dengan Variasi Debit Dan Jarak Elbow 90 Untuk Sistem Perpipaan Yang Efisien. Jurnal Teknik Mesin Univ. Muhammadiyah Medan, Vol.7, No.1, Pp. 32- 35. 2018.

M. Rivamey. F. Analisis Penurunan Head Losses Pada Belokan 180° Dengan Variasi Tube Bundle Pada Diameter Pipa 2 Inchi. Jurnal Simki Techsain, Vol.1, No.1. Feb. 2017.

Irfan, M.R. & Adi, Syuriadi. Analisis Faktor Head Losses Penstock Terhadap Daya Yang Dihasilkan Di Plta Saguling. Jurnal Poli-Teknologi, Vol.15, No.3. Mar. 2017.

Edi, Widodo. & Indah, S. Rekayasa Instalasi Pompa Untuk Menurunkan Head Loss. Prosiding Sntt Fgdt, Vol.4. Nov. 2016.

Hariyono., Gatut, R., & Haris. M. Study Eksperimental Perilaku Aliran Fluida Pada Sambungan Belokan Pipa. Jurnal Prodi Teknik Mesin Universitas Pgri Banyuwangi, Vol. 1, No. 1, Pp. 12-14. Nov. 2016.

Sarjito., Subroto & Arif, Kurniawan. Studi Distribusi Tekanan Aliran Melalui Pengecilan Saluran Secara Mendadak Dengan Belokan Pada Penampang Segi Empat. Jurnal Teknik Mesin, Vol.17, No.1. Jan. 2016.

Lahiouel, Y. & Lahiouel. R. Evaluation Of Energy Losses In Pipes. American Journal Of Mechanical Engineering, Vol.3, No.3,Pp. 32-37. Oct. 2015.

Imam. Suprayogi., Bochari., Joleha., & Amril. Fenomena Kehilangan Energi Pada Pipa Menggunakan Pendekatan Model Fisik Skala Laboratorium. Jurnal Aptek, Vol. 6, No.2, Pp. 159-164. Jun. 2014.

Sodiki, J.I., & Adigio, E.M. The Head Loss Ratio In Water Distribution: Case Study Of A 448-Bed Student Hostel. Innovative Systems Design And Engineering, Vol.5, No.5 Pp.91-100. 2014.

Jhon, F.S. & Jorfri, B. S. Perancangan Alat Uji Gesekan Aliran Di Dalam Saluran. Jurnal Ilmiah Teknik Mesin, Vol. 1, No.1. 2013.

Md. Shamim,Reza., A.H.M, Fazle, Elahi., M.

R. Halder. Design Construction And Testing Of A Fluid Head Loss Measuring Apparatus. International Conference On Mechanical, Industrial And Energy Engineering, Vol.2. Jan. 2013.

Muchsin. Kerugian-Kerugian Pada Pipa Lurus Dengan Variasi Debit Aliran. Jurnal Mekanikal, Vol.4, No.2, Pp.386-392. Jul. 2013.

Rachmat, Subagyo. Kaji Eksperimental Koefisien Kerugian Pada Percabangan Pipa Dengan Sudut 45, 60 Dan 90. Jurnal Fisika Flux, Vol.9, No.2, Pp. 144-150. 2012.

Untung. S. D. & Galih. P. Pengaruh Perubahan Laju Aliran Terhadap Tekanan Dan Jenis Aliran Yang Terjadi Pada Alat Uji Praktikum Mekanika Fluida. Turbo, Vol.1, No.2, Pp.106-115. Dec. 2012..

Zainudin., I Made.A,S. & I Made, Nuarsa. Analisa Pengaruh Variasi Sudut Sambungan Belokan Terhadap Head Losses Aliran Pipa. Dinamika Teknik Mesin,

Vol. 2, No. 2, Pp.75-83. 2012

Helmizar. Studi Eksperimental Tentang Head Loss Pada Aliran Fluida Yang Melalui Elbow 90°. Jurnal Energi Dan Manufaktur, Vol.1. Apr. 2011.

Lutfi, Nurcholis. Pehitungan Laju Aliran Fluida Pada Jaringan Pipa. Jurnal Traksi, Vol.6, No.1, Pp. 19-31. Jun. 2008.

Tris, Sugiarto. Rancangan Bangun Perangkat Uji Rugi-Rugi Head Dengan Fluida Kerja Air (H20) Dan Analisanya. Intuisi Teknologi Dan Seni, Vol.1, No.2, Pp. 130-134. 2007




DOI: http://dx.doi.org/10.22441/jtm.v13i3.16960

Refbacks

  • There are currently no refbacks.


Copyright (c) 2024 Jurnal Teknik Mesin

Jurnal Teknik Mesin (JTM)
Program Studi Teknik Mesin, Fakultas Teknik, Universitas Mercu Buana
Jl. Meruya Selatan No. 01, Kembangan, Jakarta Barat 11650, Indonesia
Email: [email protected]
Telp.: 021-5840815/ 021-5840816 (Hunting)
Fax.: 021-5871335

JTM is indexed by the following abstracting and indexing services:

 

 

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

View My Stats