PENENTUAN JENIS DRAFT TUBE BERDASARKAN NILAI HEAD RECOVERY DAN KINERJA TURBIN HYDROCOIL MENGGUNAKAN METODE COMPUTATIONAL FLUID DYNAMICS

Fahmi Hidayat, Alief Avicenna Luthfie, Agung Wahyudi Biantoro

Abstract


A Microhydro Power Plant (MHP) with hydrocoil turbine in Sukajaya Lembang Village, Bandung, West Java, has been successfully designed. However, the velocity of the water flow after exiting the hydrocoil turbine is still relatively high, so there is still a lot of wasted flow energy before it can be converted. Like other reaction turbines, the hydrocoil turbine requires a draft tube in order to maximize its energy conversion process. Thus, the purpose of this research is to determine the type of draft tube based on the head recovery value and performance of the hydrocoil turbine for the MHP system. This determination process involves 3 stages: 1) evaluation of the performance of the hydrocoil turbine that has been installed with three types of draft tubes, namely conical straight, curved elbow, and simple elbow, by Computational Fluid Dynamics (CFD), 2) calculation of the head recovery of the three types of draft tubes, and 3) determination of the best draft tube based on the head recovery value and performance of the hydrocoil turbine. In stage one, the type of analysis used is steady state with the SST k-ω turbulence model, to capture turbulence in the penstock pipe and near the turbine blades. As the results, the highest hydrocoil turbine efficiency with all three types of draft tubes installed, is at a rotational speed of N=1100 rpm. The highest efficiency for the hydrocoil turbine with conical straight, curved elbow, and simple elbow draft tubes are 90.48%, 90.18%, and 91.26%, respectively. Meanwhile, the head recovery at rotational speed N=1100 rpm for conical straight, curved elbow, and simple elbow draft tubes are 1.627 m, 1.866 m, and 4.097 m, respectively. Thus, the simple elbow draft tube is the best to use in this MHP system because it has the highest head recovery and efficiency values.

Keywords


Turbin Hydrocoil, Draft tube, Head recovery, Efisiensi, Computational Fluid Dynamics (CFD)

References


IESR, “Energi Terbarukan,” J. Chem. Inf. Model., vol. 53, no. 9, pp. 1689–1699, 2017.

A. Taufiqurrahman and J. Windarta, “Overview Potensi Dan Perkembangan Pemanfaatan Energi Air Di Indonesia,” J. Energi Baru dan Terbarukan, vol. 1, no. 3, pp. 70–78, 2021, doi: 10.14710/jebt.2020.10036.

S. Nisworo and E. Setyowati, “Menggali Potensi Aliran Air Sungai Sebagai Sumber Tenaga Pembangkit Listrik Mikrohidro; Studi Kasus : Sungai Kali Manggis Di Wilayah Magelang,” J. Teknol. Acad. Ista, vol. 12, no. 2, pp. 260–265, 2008.

A. Aprillianto, Indarto, and Prajitno, “Design of A Prototype Hydrocoil Turbine Applied As Micro Hydro Solution,” ASEAN J. Syst. Eng., vol. 1, no. 2, pp. 72–76, 2013.

S. Tridon, S. Barre, G. Dan, and L. Tomas, “Fluids Experimental analysis of the swirling flow in a Francis turbine draft tube : Focus on radial velocity component determination,” Eur. J. Mech. B/Fluids, vol. 29, no. 4, pp. 321–335, 2010, doi: 10.1016/j.euromechflu.2010.02.004.

R. A. Subekti, “Analisis Aliran Fluida Dinamik Pada Draft Tube Turbin Air,” Puslit Tenaga List. dan Mekatronik - LIPI, no. 21, 2012.

M. H. Shojaeefard, A. Mirzaei, and A. Babaei, “Shape optimization of draft tubes for Agnew microhydro turbines,” Energy Convers. Manag., vol. 79, pp. 681–689, 2014, doi: 10.1016/j.enconman.2013.12.025.

A. Baya, S. Muntean, V. C. Câmpian, A. Cuzmoş, M. Diaconescu, and G. Bǎlan, “Experimental investigations of the unsteady flow in a Francis turbine draft tube cone,” IOP Conf. Ser. Earth Environ. Sci., vol. 12, p. 012007, 2010, doi: 10.1088/1755-1315/12/1/012007.

C. D. Widiawaty, A. I. Siswantara, and G. G. R. Gunadi, “Kajian Analisis Engineering Dengan Metode Computational Fluid Dynamics,” J. PoliTeknologi, vol. 14, no. 3, 2016, doi: 10.32722/pt.vol14.no.3.2015.pp.

A. A. Luthfie, “Analisis Pengaruh Perubahan Sudut Pipa Siphon Terhadap Performasi Turbin Hydrocoil Dengan Menggunakan Metode Computational Fluid Dynamic (CFD),” J. Tek. Mesin, vol. 6, no. 1, p. 41, 2017, doi: 10.22441/jtm.v6i1.1336.

S. Sukamta and A. Kusmantoro, “Perencanaan Pembangkit Listrik Tenaga Mikro Hidro (PLTMH) Jantur Tabalas Kalimantan Timur,” J. Tek. Elektro Unnes, vol. 5, no. 2, pp. 58–63, 2013.

Max, “Draft Tube: A Basic Guide to The Types, Function And Efficiency,” Linquip Technews, 2020. https://www.linquip.com/blog/draft-tube/#draft_tube_function.

R. M. Irawan, “Simulasi CFD Aliran Stratified Air-Udara pada Pipa Horisontal,” Semesta Tek., vol. 21, no. 2, 2016, doi: 10.18196/st.212227.

H. K. Versteeg and W. Malalasekera, An Introduction to Computational Fluid Dynamics: The Finite Volume Method. New York: Pearson Education Limited, 1995.

Y. A. Cengel and J. Cimbala, Fluid Mechanics: Fundamental And Application, vol. 1999, no. December. 2006.

R. M. A. A. Aritonang, “Rancangan Pengujian Serta Pembuatan Turbin Air Kinetik Tipe Savonius Poros Vertikal Menggunakan Pemandu Arah Aliran Dengan Pemanfaatan Aliran Sungai,” J. Pembang. Wil. Kota, vol. 1, no. 3, pp. 82–91, 2018.

A. Muliawan and A. Yani, “Analisis Daya Dan Efisiensi Turbin Air Kinetis Akibat Perubahan Putaran Runner,” Sainstek J. Sains dan Teknol., vol. 8, no. 1, p. 1, 2017, doi: 10.31958/js.v8i1.434.

I. Hanggara and H. Irvani, “Potensi PLTMH (Pembangkit Listrik Tenaga Mikro Hidro) Di Kecamatan Ngantang Kabupaten Malang Jawa Timur,” J. Reka Buana, vol. 2, no. 2, pp. 149–155, 2017.

R. Khare, V. Prasad, and M. Verma, “Design Optimisation of conical draft tube of hydraulic turbine,” IJAEST Int. J. Adv. Eng. Sci. Technol., vol. 2, no. 1, pp. 22–26, 2012.

A. A. Luthfie, S. E. Pratiwi, and P. Hidayatulloh, “Hydrocoil Turbine Performance at 3 m, 4 m, and 5 m Head Analysis Using Computational Fluid Dynamics Method,” IOP Conf. Ser. Mater. Sci. Eng., vol. 343, no. 1, 2018, doi: 10.1088/1757-899X/343/1/012024.




DOI: http://dx.doi.org/10.22441/jtm.v12i1.18270

Refbacks



Copyright (c) 2023 Jurnal Teknik Mesin

Jurnal Teknik Mesin (JTM)
Program Studi Teknik Mesin, Fakultas Teknik, Universitas Mercu Buana
Jl. Meruya Selatan No. 01, Kembangan, Jakarta Barat 11650, Indonesia
Email: [email protected]
Telp.: 021-5840815/ 021-5840816 (Hunting)
Fax.: 021-5871335

JTM is indexed by the following abstracting and indexing services:

 

 

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

View My Stats