Vol 14, No 2 (2025)

Table of Contents

Articles

DESIGN ANALYSIS OF AXIAL FLUX PERMANENT MAGNET GENERATOR FOR EXHAUST AC VERSION-3 TYPE B OUTPUT WIND POWER PLANT PROTOTYPE
10.22441/jtm.v14i2.15993
Muhammad Ramadhan Noor Alam, Gian Villany Golwa
PDF
83-93
Analysis of The Effect of Temperature Variations and Natural Gas Flow on Zinc Oxide (Zno) Quality Results Using The French Method
10.22441/jtm.v14i2.31993
Yadi Suyadi, Sagir Alva
PDF
94-98
Performance Analysis of R600a as a Replacement for R134a in a Household Refrigeration System
10.22441/jtm.v14i2.32326
Andi Firdaus Sudarma, Henry Carles, Azmi Azhar, Muhammad Akmal, Alfa Firdaus Sirait
PDF
99-108
Analysis of Adhesion Strength and Surface Hardness of 6061 Aluminum Alloy Resulting from Powder Coating with Variations in Sandblasting Process Time
10.22441/jtm.v14i2.32946
Panca Putra Hasugian, Xander Salahudin, Nani Mulyaningsih
PDF
109-116
FLEXURAL CHARACTERISTICS OF ROLL-WRAPPED GFRP COMPOSITE HOLLOW SQUARE TUBE
10.22441/jtm.v14i2.33558
Kaleb Priyanto, Haniel Haniel, Martinus Heru Palmiyanto, Bambang Hari Priyambodo
PDF
117-123
ANALYSIS OF WATER INGRESS OF COMPOSITE SANDWICH STRUCTURE ON CABIN FLOOR OF AIRBUS A330 AIRCRAFT USING ANSYS
10.22441/jtm.v14i2.32006
Agus Hermawan, Muhamad Fitri
PDF
124-136
UTILIZATION OF CORN COB WASTE AS COMPOSITE BOARD (FIBERBOARD) WHICH WILL BE USED AS SOUNDPROOF WALLS
10.22441/jtm.v14i2.33537
Yusril Irwan, Agus Patih Hurahman, Muhammad Naufal Amanullah
PDF
137-143
Optimization of Impact and Thermal Performance of Phenolic Composites through Bentonite Reinforcement
10.22441/jtm.v14i2.33593
Farda Pega Libra Gojandra, Kaleb Priyanto, Ninda Kurniadi
PDF
144-149
Thermal and Flame Retardant Performance of Glass Fiber-Reinforced UPR Composites Modified with Boric Acid and Sodium Silicate
10.22441/jtm.v14i2.33580
Ruben Bayu Kristiawan, Ganjar Pramudi, Komar Roni
PDF
150-156
Finite Element Analysis and Optimization of Medium Bus Frame Structure
10.22441/jtm.v14i2.33587
Ninda Kurniadi, Kaleb Priyanto, Farda Pega Libra Gojandra
PDF
157-162