OPTIMASI KAPASITAS PRODUKSI BANTAL DENGAN MENGGUNAKAN INTEGER LINIER PROGRAMMING DI PT. DUNLOPILLO INDONESIA
DOI:
https://doi.org/10.22441/pasti.2022.v16i2.002Keywords:
Kapasitas, Perencanaan Kapasitas, Optimasi, RCCP, ILPAbstract
PT. Dunlopillo Indonesia merupakan produsen bantal. Rata-rata selisih permintaan dan produksi 8,34% melebihi batas toleransi 5%. Perlu dilakukan perencanaan produksi Januari 2022 yang tepat melalui perhitungan kapasitas produksi. Untuk itu dilakukan penelitian yang bertujuan mengoptimumkan kapasitas produksi dalam memenuhi permintaan produksi untuk mendapatkan profit yang maksimum. Perencanaan kapasitas dilakukan dengan Rough Cut Capacity Planning (RCCP). Optimasi kapasitas produksi dilakukan dengan menggunakan Integer Linier Programming. Hasil temuan penelitian menunjukkan bahwa optimasi kapasitas produksi dilakukan dengan penambahan operator di SK-5 sebanyak 7 yaitu 4 di-hire, 1 diambil dari SK-6, dan 2 diambil dari SK-7. Penambahan operator juga dilakukan di SK-1 sebanyak 2 yang diambil dari SK-2 dan penambahan di SK-3 sebanyak 3 yang diambil dari SK-4. Jumlah produksi yang optimum untuk bantal dewasa sebanyak 1130 pcs, bantal anak sebanyak 350 pcs dan bantal guling sebanyak 405 pcs. Hasil optimum ini memberikan penambahan profit sebesar 39,36% dibandingkan dengan kondisi awal tanpa penambahan operator.Downloads
References
Abidin, R. Z., Sudarto, S., & Hasibuan, S. (2020). Optimalisasi Persediaan Produk Sodium Hypochlorite Menggunakan Pendekatan Linier Programming. Jurnal INTECH Teknik Industri Universitas Serang Raya, Vol. 6(2), 177–182.
Fatmawati, & Umar, W. (2013). Analisis Kapasitas Produksi dengan Metode Capacity Requirement Planning (CRP) di PT. Hanil Jaya Stell. Jurnal Teknik Mesin, Vol. 1(2), 351–354.
Firmansah, F., & Wulandari, F. (2021). Integer Linear Programming Aapplication in Production Results Optimization Using Cutting Plane Method. Desimal; Jurnal Matematika, Vol. 4(1), 57–66.
Hadinata, R., Salmia, L. A., & Priyasmanu, T. (2021). Perencanaan Kapasitas Produksi Menggunakan Metode Rough Cut Capacity Planning (RCCP) pada Home Industri Loca Nusa. Jurnal Valtech, Vol. 4(1), 21–28.
Irawan, Nasiatin, T., Adha, S., Julyanto, O., Rani, C. P., & K, R. D. P. (2020). Analysis of Production Capacity Planning and Control in PT . Krakatau Wajatama With Rought Cut Capacity Planning ( RCCP ). Journal Industrial Engineering & Management Research, Vol. 1(2), 207–218.
Irsyad, I., Katili, M. R., & Achmad, N. (2020). Penerapan Metode Integer Linear Programming pada Penjadwalan Karyawan. Jurnal Riset dan Aplikasi Matematika (JRAM), Vol. 4(1), 63-73
Mohungo, S. M. N., & Yahya, L. (2021). Penerapan Model Integer Linear Programming. Euclid, Vol. 8(1), 6–15.
Muzakir, M., Irawan, H. T., & Pamungkas, I. (2019). Pengukuran Waktu Kerja Karyawan Bengkel Toyota PT. Dunia Barusa di Kota Banda Aceh. Jurnal Optimalisasi, Vol. 4(1), 21–29.
Ngusman. (2018). Perencanaan Jumlah Produksi Optimum dengan Metode Linearm Programming pada UD Muktijaya Cor di Ciamis. Jurnal Media Teknologi, Vol. 05(01), 1–14.
Rani, A. M. (2019). Meningkatkan Kapasitas Produksi dengan Capacity Planning ( Studi pada PT XYZ ). Jurnal Manajemen dan Bisnis : Performa, Vol. 16(1), 39–49.
Setiabudi, Y., Afma, V. M., & Irwan, H. (2018). Perencanaan Kapasitas Produksi ATV12 dengan Menggunakan Metode Rough Cut Capacity Planning( RCCP ) untuk Mengetahui Titik Optimasi Produksi (Studi kasus di PT Schneider Electric Manufacturing Batam ). Jurnal Profisiensi, Vol. 6(2), 80–87.
Sitorus, H., Rosihan, R. I., & Fizai, M. (2022). Optimasi Kapasitas Produksi Dengan Integer Linear Programming ( ILP) dalam Perencanaan Jadwal Induk Produksi di PT. Indonesia Epson Industry.Vastuwidya, Vol. 5(1), 10–21.
Suciyati, E. (2019). Analisis Perencanaan Kapasitas Produksi dengan Metode Break Even Point pada UD Sinar Logam Jaya Kabupaten Tegal. Fakultas Ekonomi dan Bisnis. Universitas Pancasila, Tegal.
Sugarindra, M., & Nurdiansyah, R. (2020). Production Capacity Optimization with Rough Cut Capacity Planning (RCCP). IOP Conference Series: Materials Science and Engineering, 722(1). https://doi.org/10.1088/1757-899X/722/1/012046
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
