Usulan Perbaikan Tingkat Kesiapan I4.0 di Perusahaan Agro Industri
DOI:
https://doi.org/10.22441/10.22441/2441/pasti.2025.v19i2.009Keywords:
INDI 4.0, kesiapan digital, agroindustry, Industri 4.0, roadmap, transformasiAbstract
Penelitian ini bertujuan untuk mengevaluasi tingkat kesiapan digital pada sebuah perusahaan agroindustri skala menengah dalam menghadapi transformasi menuju Industri 4.0. Evaluasi dilakukan berdasarkan lima pilar utama dalam kerangka INDI 4.0 yang meliputi: Manajemen dan Organisasi, Orang dan Budaya, Produk dan Layanan, Teknologi, serta Operasi Pabrik. Penelitian ini menggunakan pendekatan studi kasus dengan pengumpulan data melalui kuesioner self-assessment berbasis INDI 4.0, wawancara semi-terstruktur dengan Manajer IT sebagai responden kunci, dan observasi langsung terhadap operasional perusahaan. Metode analisis data yang digunakan adalah deskriptif kuantitatif dengan pembobotan skor sesuai pedoman resmi INDI 4.0. Hasil penelitian menunjukkan bahwa perusahaan memperoleh skor INDI 4.0 sebesar 2,26 yang termasuk dalam kategori kesiapan sedang (Level 2). Meskipun perusahaan telah mengadopsi beberapa inisiatif digital seperti sistem ERP dan pemantauan suhu pada cold storage, masih terdapat kekurangan dalam hal integrasi teknologi secara menyeluruh dan pengembangan kompetensi SDM yang memadai. Oleh karena itu, disusunlah sebuah roadmap strategis sebagai rekomendasi perbaikan, untuk mendorong peningkatan kesiapan digital dan memperkuat daya saing perusahaan di era industri digital.
Downloads
References
Azwina, R., Wardani, P., Sitanggang, F., & Silalahi, P. R. (2023). STRATEGI INDUSTRI MANUFAKTUR DALAM MENINGKATKAN PERCEPATAN PERTUMBUHAN EKONOMI DI INDONESIA. In Bisnis dan Akuntansi (Vol. 2, Issue 1). Jurnal Manajemen.
Cotrino, A., Sebastián, M. A., & González-Gaya, C. (2020). Industry 4.0 roadmap: Implementation for small and medium-sized enterprises. Applied Sciences (Switzerland), 10(23), 1–17. https://doi.org/10.3390/app10238566
Drath, R., & Horch, A. (2014). Industrie 4.0: Hit or hype? [Industry Forum]. IEEE Industrial Electronics Magazine, 8(2), 56–58. https://doi.org/10.1109/MIE.2014.2312079
Fatmawati, Sudiarso, A., Juprianto, & Gultom, R. A. (2023). Potential application of industry 4.0 with lean six sigma in Indonesia’s defense industry: A Comprehensive Study. In International Journal Of Humanities Education And Social Sciences (IJHESS) E-ISSN (Vol. 3, Issue 2). https://ijhess.com/index.php/ijhess/
Grufman, N., Lyons, S., & Sneiders, E. (2020). Exploring Readiness of SMEs for Industry 4.0. Complex Systems Informatics and Modeling Quarterly, 2020(25), 54–86. https://doi.org/10.7250/csimq.2020-25.04
Gumilang, Z. F., & Mahfudz, M. S. (2025). PENGUKURAN READINESS LEVEL MENGGUNAKAN INDI 4.0: STUDI KASUS UMKM DI BANDUNG. 20(2), 111–124.
Hasbullah, H., & Bareduan, S. A. (2024). Identifying weaknesses and strengths of existing I4.0 Readiness Indices to enhance INDI 4.0. Sinergi (Indonesia), 28(1), 129–140. https://doi.org/10.22441/sinergi.2024.1.013
Ichsani, F. N., & Hasbullah, H. (2024). Developing a transformation readiness index for Industry 4.0: a case study of food logistics in the rice commodity sector. Operations Excellence: Journal of Applied Industrial Engineering, 16(2), 147. https://doi.org/10.22441/oe.2024.v16.i2.116
Kagermann, H., Lukas, W.-D., & Wahlster, W. (2011). Industrie 4.0: Mit dem Internet der Dinge auf dem Weg zur 4. industriellen Revolution. VDI Nachrichten, 13, 3–4. http://www.vdi-nachrichten.com/Technik-Gesellschaft/Industrie-40-Mit-Internet-Dinge-Weg-4-industriellen-Revolution
Kagermann, H., & Wahlster, W. (2022). Ten Years of Industrie 4.0. Sci, 4(3). https://doi.org/10.3390/sci4030026
Murti, H. W. (2021). STUDI PERBANDINGAN KEBIJAKAN INDUSTRI 4.0 INDONESIA DENGAN TIGA NEGARA LEADING GROUP FUTURE OF PRODUCTION. Jurnal Manajemen Industri Dan Logistik, 5(1), 62–74. https://doi.org/10.30988/jmil.v5i1.654
Panchal, G., Shaikh, W., Masi, D., & Chohan, N. (2024). Digital Transformation and Industry 5.0 Roadmap for SMEs To Drive Productivity and Sustainability. Researchgate.Net, November, 0–9.
Perindustrian, K. (2018). Indonesia Industry 4.0 Readiness Index. Kementerian Perindustrian.
Rosdzaka, Z. M., & Arijanto, S. (2024). E ISSN : 2746-7112 Seminar Nasional Pengkajian dan Penerapan Sains Teknologi. In Universitas Mercubuana, Indonesia (Vol. 10, Issue 1). https://publikasi.kocenin.com/index.php/pakar/issue/archive
Zhou, K., Liu, T., & Zhou, L. (2015). Industry 4.0: Towards future industrial opportunities and challenges. 2147–2152. https://doi.org/10.1109/FSKD.2015.7382284
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
