ANALISIS BAHAYA K3 PADA LINE PRODUKSI DENGAN METODE HAZARD OPERABILITY STUDY (HAZOPS) DAN FISHBONE DIAGRAM DI PT. SILINDER KONVERTER INTERNASIONAL
DOI:
https://doi.org/10.22441/pasti.2021.v15i2.009Kata Kunci:
Identifikasi Bahaya, Hazops, Fishbone Diagram, NGT, 5W 1HAbstrak
PT. Silinder Konverter Internasional adalah perusahaan di bidang Silinder Rotogravure. Perusahaan ini merupakan industri sektor kimia dan baru berjalan sekitar 2 tahun, untuk itu perusahaan perlu memperhatikan masalah Keselamatan dan Kesehatan Kerja, karena hal ini sangat berpengaruh terhadap produktivitas perusahaan. Tujuan dalam penelitian ini untuk mengidentifikasi faktor-faktor penyebab bahaya Keselamatan dan Kesehatan Kerja agar terhindar dari kecelakaan kerja di PT. Silinder Konverter Internasional. Dari hasil penelitian dengan metode Hazards Operability Study (HAZOPS) diperoleh potensi bahaya terpapar kimia sebanyak 38 potensi (40%), tertimpa material 28 potensi (29.47%), tergores sebanyak 14 potensi (14.73%), terjepit sebanyak 12 potensi (12.63%), dan kebisingan sebanyak 3 potensi (3.2%). Selanjutnya dicari faktor penyebab dengan fishbone diagram dari kasus potensi bahaya terbanyak yaitu terpapar kimia terdapat 12 faktor. Dilanjutkan dengan mencari faktor penyebab dominan dengan Nominal Group Technique (NGT) ada 7 faktor. Kemudian merencanakan perbaikan Dari 7 faktor tersebut dengan metode 5W+1H agar tingkat risiko kecelakaan kerja menurun.
Unduhan
Referensi
Ahmad, A. C., Zin, I. N. M., Othman, M. K., & Muhamad, N. H. (2016). Hazard Identification, Risk Assessment and Risk Control (HIRARC) accidents at Power Plant. MATEC Web of Conferences, 66, 1–6. https://doi.org/10.1051/matecconf/20166600105
Alfatiyah R. (2017). Analisis Manajemen Risiko Keselamatan dan Kesehatan Kerja dengan Menggunakan Metode HIRARC pada Pekerja Seksi Casting. Jurnal Mesin Teknologi (SINTEK Jurnal), Vol. 11(2), 88–101.
Bastuti S. (2019). Analisis Risiko Kecelakaan Kerja Dengan Metode Failure Mode and Effect Analysis ( FMEA ) dan Fault Tree Analysis ( FTA ) untuk Menurunkan Tingkat Risiko Kecelakaan Kerja (PT. Berkah Mirza Insani) Menurut Departemen Keselamatan dan Kesehatan Kerja DO. Jitmi, Vol. 2, 48–52.
Bastuti S., Zulziar M. & Suaedih E. (2019). Analisis Postur Kerja Dengan Metode OWAS (Ovako Working Posture Analysis System ) dan QEC ( Quick Exposure Checklist ) untuk Mengurangi Terjadinya Kelelahan Musculoskeletal Disorders di PT. Truva Pasifik. Jitmi, Vol. 2(2), 116–125.
Cameron I., Mannan S., Németh E., Park S., Pasman H., Rogers W. & Seligmann B. (2017). Process Hazard Analysis, Hazard Identification and Scenario Definition: are The Conventional Tools Sufficient, or Should and Can We Do Much Better?. Process Safety and Environmental Protection, Vol. 110, 53–70. https://doi.org/10.1016/j.psep.2017.01.025
Daramola, O., Stålhane, T., Sindre, G., & Omoronyia, I. (2011). Enabling hazard identification from requirements and reuse-oriented HAZOP analysis. 2011 4th International Workshop on Managing Requirements Knowledge, MaRK’11 - Part of the 19th IEEE International Requirements Engineering Conference, RE’11, October 2011, 3–11. https://doi.org/10.1109/MARK.2011.6046555
Dearman J., Gimenez-arnau E., Greenwell L., Hartung T. & Kuper F. (2016). Chemical Respiratory Allergy : Opportunities for Hazard Identification and Characterisation - The Report and Recommendations of ECVAM Workshop Chemical Respiratory Allergy : Opportunities for Hazard Identification and Characterisation The Report and Recom. ATLA, Vol. 60. https://doi.org/10.1177/026119290703500212
Emadwiandr. (2013). Analisis Identifikasi Bahaya Pada Proses Produksi Pada PT X dengan Metode Risk Assessment. Journal of Chemical Information and Modeling, Vol. 53(9), 1689–1699. https://doi.org/10.1017/CBO9781107415324.004
Mansur, A., & Nasution, M. I. (2016). Identification of behavior based safety by using traffic light analysis to reduce accidents. IOP Conference Series: Materials Science and Engineering, 105, 1. https://doi.org/10.1088/1757-899X/105/1/012033
Siddiquia N. A., Abhishek N., Sharmaa M. & Srivastava A. (2014). Risk Management Techniques HAZOP & HAZID Study. Occupational Health & Safety, Fire & Environment – Allied Science, Vol. 1(1), 5–8.
Sugarindra, M., Suryoputro, M. R., & Novitasari, A. T. (2017). Hazard identification and risk assessment of health and safety approach jsa (job safety analysis) in plantation company. IOP Conference Series: Materials Science and Engineering, 215, 1. https://doi.org/10.1088/1757-899X/215/1/012029
Zhang S., Sulankivi K., Kiviniemi M., Romo I., Eastman C. M. & Teizer J. (2015). BIM-Based Fall Hazard Identification and Prevention in Construction Safety Planning. Safety Science, Vol. 72, 31–45. https://doi.org/10.1016/j.ssci.2014.08.001
Unduhan
File Tambahan
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
