Literature Review of the Application of Total Productive Maintenance (TPM) in various industries in Indonesia

Lucky Setiawan

Abstract


This research is a literature review from various journals with the theme Total Productive Maintenance which is implemented in various companies in Indonesia. The purpose of this paper is as a means of sharing and learning between companies that can be taken as a brainstorming theme related to machine performance within a company, which may not occur between companies that problems outside of the machine problem. The OEE factor of the machine is one of the parameters that is the goal which results in poor engine performance. The research method is to search journals from various sources that have keywords related to TPM. The number of journals found from 2015 to 2020 was 60 journals which were finally iterated to become 46 journals to be selected for this paper. The concept of Pareto and Root caused Analysis (4M + E) is a helpful tool in concluding the literature review in this paper, while the TPM Pillar will provide a solution guide for each problem that has been summarized in 4M + E which will be classified from each problem to be the solution of the problem. that has been found. The conclusions of this literature review are related to this new card problem which is the focus of attention. It is the result of operator changes associated with the contract system which causes this change to be properly prepared at the time the new operator works. The previous operator's method that has been good needs to be transferred to the operator that will enter. However, this is often a big gap with the preparation of this skill transfer and the fatigue factor of operators who have side jobs, with the proliferation of online-based applications causing business operators to seek additional income so that their main work is neglected.

Keywords


Overall Equipment Effectiveness Root Caused Analysis 4M+E

Full Text:

PDF

References


Adhiutama, A., Darmawan, R., & Fadhila, A. (2020). Total Productive Maintenance on The Airbus Part Manufacturing. Jurnal Bisnis Dan Manajemen, 21(1), 3–15.

Agustiady, T. K., & Cudney, E. A. (2016). Total Productive Maintenance: Strategies and Implementation Guide (A. Badiru (ed.)). CRC Press. https://books.google.com/books?id=Tev5CQAAQBAJ&pgis=1

Amaruddin, H. (2020). Analisis Penerapan Total Productive Maintenance ( Study Kasus Perusahaan Komponen Automotive ) Analysis of the Application of Total Productive Maintenance ( Case Study of an Automotive Component Company ). Jurnal Ekonomi Manajemen Bisnis, 01(02), 141–148. https://doi.org/DOI: https://doi.org/10.37366/ekomabis.v1i02.46

Aminah, E., & Theresia, L. (2018). Penerapan Teknik Kaizen Untuk Total Productive Maintenance (TPM) di Perusahaan Manufaktur. TECHNOPEX, 212–219.

Anggraini, M., Khikmawati, E., & Widiastuti, H. (2017). Analisis Produktivitas Mesin Press Dengan Pendekatan Overall Equipment Effectiveness ( OEE ) Pada PT . Japfa Comfeed Indonesia Lampung. Jurnal Rekayasa, Teknologi, Dan Sains, 1(2), 132–138.

Anthony, M. B. (2019). Analisis Penerapan Total Productive Maintenance (TPM) Menggunakan Overall Equipment Efectiveness (OEE) Dan Six Big Losses Pada Mesin Cold Leveller PT. KPS. JATI UNIK : Jurnal Ilmiah Teknik Dan Manajemen Industri, 2(1), 29. https://doi.org/10.30737/jatiunik.v2i2.333

Apriatno. (2015). Usulan Penerapan Total Productive Maintenance (TPM) Guna Meningkatkan Kinerja Mesin Elektroplating Di Perusahaan Furnitur Tangerang. Jurnal OE, VII(3), 271–288.

Atul Pandey, S. M. & S. J. (2019). Implemented the Overall Equipment Effectiveness ( OEE ) by the techniques of Total Productive Maintenance ( TPM ) in MSE ’ s - A case study. International Journal of Advance Research, Ideas and Innovations in Technology, 5(1), 503–511.

Bakti, C. S., & Kartika, H. (2019). Analisa Produktivitas Sistem Perawatan Mesin Dengan Metode Overall Equipment Effectiveness (Oee) Di Pt.Ymn. Jurnal Ilmu Teknik Dan Komputer, 3(1), 31. https://doi.org/10.22441/jitkom.2020.v3.i1.004

Bastanta, J., Angin, P., Manurung, E. D., & Siregar, A. H. (2018). Penerapan Total Productive Maintenance dengan menggunakan metode OEE pada turbin uap Type C5 DS II – GVS. Jurnal Energi Dan Manufaktur, 10(1), 29–36.

Dandage, P. R. V, Hajare, P. K., Dhebe, M. V, Lad, A. U., & Pinjari, S. S. (2019). Development of Framework for Effective Implementation of Tpm in Engineering Education Institute. January, 278–283.

Dewanti, G. K., & Putra, M. F. (2019). Perhitungan Nilai Overall Equipment Efectiveness (OEE) Mesin Printing Amplas Kertas. Jurnal Optimasi Teknik Industri, 1(2), 1–5.

Diniaty, D., & Susanto, R. (2017). Analisis Total Produktive Maintenance (Tpm) Pada Stasiun Kernel Dengan Menggunakan Metode Overall Equipment Effectiveness (Oee) Di Pt. Surya Agrolika Reksa. Jurnal Hasil Penelitian Dan Karya Ilmiah, 3(2), 66. https://doi.org/10.24014/jti.v3i2.5561

Firman, F., Thabrani, G., & Violeta, V. P. (2018). Analisis peningkatan kinerja pemeliharaan mesin dengan Total Productive Maintenance (TPM) pada mesin boiler pabrik kelapa sawit PT. Perkebunan Nusantara VI unit usaha Rimbo Dua Tebo-Jambi. Jurnal Kajian Manajemen Bisnis, 1(2302–6359), 555–562. https://doi.org/10.2403/jkmb.10885100

Frima, F. R., Budiasih, E., & Alhilman, J. (2019). Usulan Penerapan Total Productive Maintenance ( Tpm ) Untuk Meningkatkan Efektivitas Mesin Single Needle , Single Needle , Chain Stitch , Dan Zig Zag Menggunakan Metode Overall Equipment Effectiveness ( Oee ) Dan Overall Equipment Cost Loss ( Oecl ) Di Pt. 6(2), 7542–7549.

Hafiz, K., & Martianis, E. (2019). Analisis Overall Equipment Effectiveness (OEE) pada Mesin Caterpillar Type 3512B di PT. PLN (PERSERO) ULPLTD bagan besar PLTD Bengkalis. SINTEK JURNAL: Jurnal Ilmiah Teknik Mesin, 13(2), 87. https://doi.org/10.24853/sintek.13.2.87-96

Hairiyah, N., Rizki, R., & Wijaya, R. A. (2019). Analisis Total Productive Maintenance (Tpm) Pada Stasiun Kernel Crushing Plant (Kcp) Di Pt. X. Jurnal Teknologi Pertanian Andalas, 23(1), 103. https://doi.org/10.25077/jtpa.23.1.103-110.2019

Hamdy, M. I., & Pratiwi, Y. D. (2015). Analisa Overall Equipment Effectiveness pada Mesin Breaker. Jurnal Teknik Industri Jurnal Hasil Penelitian Dan Karya Ilmiah, 1(2), 70–74.

Hamid, A., Sewaka, & Purnomo, A. (2018). Analisa Efektivitas Kinerja Mesin Turning Star SB-16 Dengan Metode Total Productive Maintenance ( TPM ) di PT Mitsuba Indonesia. Jitmi, 1(1), 50–63.

Haradito, A., Sabarisman, I., & Anoraga, S. B. (2019). Analisis efektivitas mesin pada divisi pengalengan jamur di pt xyz menggunakan metode overall equipment effectiveness. Jurnal Nasional Teknologi Terapan, 3(1), 71–83.

Haryono, L., & Susanty, A. (2015). Penerapan Total Productive Maintenance Dengan Pendekatan Overall Equipment Effectiveness (OEE) Dan Penentuan Kebijakan Maintenance Pada Mesin Ring Frame Divisi Spinning I Di Pt Pisma Putra Textile. Jati Undip: Jurnal Teknik Industri, 4(4).

Iftari, M. N. (2015). Perbaikan maintenance untuk target availability penyaluran gas dengan pendekatan total productive maintenance di PT Pertamina gas area jawa bagian barat. Jurnal MIX, VI(2), 54–67.

Kholil, M., Maulidina, A. D., & Rimawan, E. (2016). Analisa Total Productive Maintenance terhadap Produktivitas Kapal/Armada Menggunakan Metode Overall Equipment Effectiveness pada PT. Global Trans Energy International. Journal of Industrial Engineering & Management Systems, 9(1), 1–18. https://doi.org/10.30813/JIEMS.V9I1.125

Krisnaningsih, E. (2015). Usulan Penerapan TPM dalam Rangka Peningkatan Efektifitas Mesin dengan OEE sebagai Alat Ukur di PT XYZ. Jurnal PROSISKO, 2(2), 13–26.

Kristono, S. N., & Hudori, M. (2018). Pengukuran Efektivitas Mesin Produksi Besi Bondeck pada Industri Manufaktur dengan Overall Equipment Effectiveness. Jurnal Citra Widya Edukasi, 10(3), 253–258.

Latif, A., & Purnomo, R. (2020). Analisis Total Productive Maintenance (Tpm) Menggunakan Overall Equipment Effectiveness (Oee) Di Pt. Perkebunan Nusantara Vi Ophir. Jurnal Sains Dan Teknologi: Jurnal Keilmuan Dan Aplikasi Teknologi Industri, 19(2), 86. https://doi.org/10.36275/stsp.v19i2.204

Livia, K., & Fewidarto, P. D. (2016). Evaluasi Peningkatan Kinerja Produksi melalui Penerapan Total Productive Maintenance di PT Xacti Indonesia. Jurnal Manajemen Dan Organisasi, 7(1), 32. https://doi.org/10.29244/jmo.v7i1.14067

Magdalena, R., & Ginting, A. P. (2019). ANALISIS PRODUKTIVITAS MESIN SHEATING 3 DENGAN METODE OVERALL EQUIPMENT EFFECTIVENESS ( OEE ) PADA PRODUKSI FIBER OPTIC PT VOKSEL ELECTRIC TBK. Jurnal Ilmiah Teknik Industri, 7(2), 120–127.

Mulyo, A. E., & Hermansyah. (2018). Penerapan TPM dengan menggunakan overall equipment effectivenees (OEE) dan six big losses pada mesin reverse osmosis di bagian utility PT. Widatra Bhakti. Journal Knowledge Industrial Engineering, 73–80.

Nurfaizah, U., Adianto, R. H., & Prassetiyo, H. (2014). Rancangan Penerapan Total Productive Maintenance (TPM) Di Bagian Press II PT. XYZ. Jurnal Online Institut Teknologi Nasional, 2(1), 340–353.

Nurprihatin, F., Angely, M., & Tannady, H. (2019). Total productive maintenance policy to increase effectiveness and maintenance performance using overall equipment effectiveness. Journal of Applied Research on Industrial Engineering, 6(3), 184–199. https://doi.org/10.22105/jarie.2019.199037.1104

Nursubiyantoro, E., Puryani, P., & Rozaq, M. I. (2016). Implementasi Total Productive Maintenance (Tpm) Dalam Penerapan Overall Equipment Effectiveness (Oee). Opsi, 9(01), 24. https://doi.org/10.31315/opsi.v9i01.2169

Prabowo, R. F., Hariyono, H., & Rimawan, E. (2020). Total Productive Maintenance (TPM) pada Perawatan Mesin Grinding Menggunakan Metode Overall Equipment Effectiveness (OEE). Journal Industrial Servicess, 5(2). https://doi.org/10.36055/jiss.v5i2.8001

Pradana, Y., Zendrato, R. R., & Wicaksana, B. I. (2013). Penerapan Konsep Total Productive Maintenance pada Mesin Automatic Bottle Filling (Studi Kasus : PT. Guwatirta Sejahtera). Journal of Chemical Information and Modeling, 53(9), 1689–1699. https://doi.org/10.1017/CBO9781107415324.004

Praharsi, Y., Sriwana, I. K., & Sari, D. M. (2015). Perancangan Penjadwalan Preventive Maintenance Pada Pt . Artha Prima Sukses Makmur. Jurnal Ilmiah Teknik Industri, 14(1), 59–65. http://journals.ums.ac.id/index.php/jiti/article/viewFile/624/364

Pratama, H., Sutaarga, O., & Rohman, Z. (2020). Analisis Produktivitas Mesin Body Hydraulic One Stroke 30T Dengan Metode Overall Equipment Effectiveness ( OEE ) Di PT . SEL-SEM Tbk ., Tangerang. Industrial Manufacturing, 5(1), 83–94.

Priyono, S., Machfud, M., & Maulana, A. (2019). Penerapan Total Productive Maintenance (TPM) Pada Pabrik Gula Rafinasi di Indonesia (Studi Kasus: PT. XYZ). Jurnal Aplikasi Bisnis Dan Manajemen, 5(2), 265–277. https://doi.org/10.17358/jabm.5.2.265

Putra, Y. R., & Achmadi, F. (2020). Analisis Penerapan Total Productive Maintenance Pada Industri Pipa Baja. Jurnal Teknologi Dan Manajemen, 1(2), 77–86. https://doi.org/10.31284/j.jtm.2020.v1i2.911

Putri, H. S., & Anwar, S. (2020). USULAN PENERAPAN TOTAL PRODUCTIVE MAINTENANCE DI PT SHINKOBE ENGINEERING PADA MESIN CNC HORIZONTAL MAHO (MH-C 700). Jurnal Inkofar, 3(2252), 58–66. http://www.tjyybjb.ac.cn/CN/article/downloadArticleFile.do?attachType=PDF&id=9987

Rahayu, R. R., & Herdiani, L. (2018). Analisis Perhitungan Overall Equipment Effectiveness (Oee) Guna Mengurangi Six Big Losses Dan Upaya Perbaikan Dengan Pendekatan Kaizen 5S. TIARSIE, 17(2), 14–18. https://movisa.org.mx/images/NoBS_Report.pdf

Rahman, A. (2019). Total Productive Maintenance pada Mesin Cetak Offset Printing SM 102 ZP (Study Kasus di PT. XYZ). STRING (Satuan Tulisan Riset Dan Inovasi Teknologi), 4(1), 48. https://doi.org/10.30998/string.v4i1.3614

Riadi, S., & Anwar, S. (2019). Evaluasi Kinerja Pada Mesin Casting Menggunakan Metode Overall Equipment Effectiveness di PT. Surya Toto Indonesia. JIEMS (Journal of Industrial Engineering and Management Systems), 12(1), 1–10. https://doi.org/10.30813/jiems.v12i1.1531

Rufaidah, A., & Abdillah, J. (2019). Analisis Efektivitas Mesin Expeller Dengan Implementasi Tpm (Total Productive Maintenance) Di Pt.Wilmar Nabati Indonesia Gresik. KAIZEN : Management Systems & Industrial Engineering Journal, 2(2), 76. https://doi.org/10.25273/kaizen.v2i2.5973

Ruslan, M., & Prasmoro, A. V. (2018). Analisis Produktivitas Dengan Metode Overall Equipment Effectiveness (Oee) Pada Mesin kneader. Journal of Industrial and Engineering System (JIES), 1(1), 53–64.

Sahrupi, S., & Juriantoro, J. (2018). Usulan Penerapan Total Productive Maintenance pada Transfer Conveyor 17A. Jurnal Sistem Dan Manajemen Industri, 2(1), 51. https://doi.org/10.30656/jsmi.v2i1.568

Sariyusda, S., Fakhriza, F., & Putra, J. (2016). Analisa Efektivitas Prokdusi Pada Unit Urea I Dengan Menggunakan Metode Total Productive Maintenance (Tpm) Di Pt. Pupuk Iskandar Muda. Jurnal POLIMESIN, 14(1), 37. https://doi.org/10.30811/jpl.v14i1.300

Sulistiardi, O., Dian, D., & Adi, E. (2019). Perbaikan “Overall Equipment Effectiveness” (OEE) pada Line Assembly 3 Di PT. Mesin Isuzu Indonesia. Jurnal Baut Dan Manufaktur, 01(01).

Sulistyo, A. B., & Zakaria, T. (2019). Analisis Overall Equipment Effectiveness Mesin Vertical Roller Mill ( Vrm ) Di PT Cemindo Gemilang. Jurnal Intent, 2(1).

Zohari, A. (2019). Analisa Efektivitas Mesin Steel Calender Menggunakan Metode Total Productive Maintenance ( Tpm ). Jurnal Teknologi Dan Terapan Bisnis, 2(1), 22–33.




DOI: http://dx.doi.org/10.22441/ijiem.v2i1.10328

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

IJIEM - Indonesian Journal of Industrial Engineering & Management
Program Pascasarjana Magister Teknik Industri Universitas Mercu Buana
Kampus Menteng - Gedung Tedja Buana, Floor 4th  
Jl. Menteng Raya No. 29  Jakarta Pusat- Indonesia
Tlp.: +62 21 31935454 Fax: +62  21 31934474
http://publikasi.mercubuana.ac.id/index.php/ijiem

Email:  [email protected]

 

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

 

Web Analytics Made Easy - Statcounter View My Stats

The journal is indexed by: