A Systematic Literature Review of Quality Seven Tools

Barata Sutrisno


Basic quality seven tools help any organizations to improve their capability and process to fit into update situation and condition base on optimum choice they can select, in first step data need to be collected over the time upon agreed to get baseline data, as a visually how often data will emerge is a important also to compile it into some interactive graph of variations, if there any analysis can made and resulted as a listed problem occur from process have been finished, we can grade it as well to see which one impactful to our process and will be the top priority to improve, and this paper is targetted to see is the seven tools of quality is the comprehensive tools that can figured out any result that bridge us to varius group of result and easy to determine any conclution to make improvement for future plan tahat create continuous significant optimization to sustainability process to help any industry acheive a good analysis to growth over the years to come.


Seven Tools, Pareto Diagram, Cause Effect, Ishikawa, Histogram, Control Chart.

Full Text:



Akyildiz, C., & Ekmekci, I. (2020). OHS problems of migrants in Turkey and the order of importance: Pareto analysis. Sustainability (Switzerland), 12(18), 1–17. https://doi.org/10.3390/SU12187462

Al-Zwainy, F. M. S., Mohammed, I. A., & Varouqa, I. F. (2018). Diagnosing the Causes of Failure in the Construction Sector Using Root Cause Analysis Technique. Journal of Engineering (United Kingdom), 2018. https://doi.org/10.1155/2018/1804053

Artikel, I. (2019). Jurnal SENOPATI, 41–49.

Aryanto, A. T., & Auliandri, T. A. (2015). Analisis Kecacatan Produk Fillet Skin On Red Mullet Dengan The Basic Seven Tools Of Quality Dan Usulan Perbaikannya Menggunakan Metode FMEA (Failure Modes And Effect Analysis) Pada PT. Holi Mina Jaya. Jurnal Manajemen Dan Terapan, 1(1), 9–23.

Assareh, H., Waterhouse, M. A., Moser, C., Brighouse, R. D., Foster, K. A., Smith, I. R., & Mengersen, K. (2013). Data Quality Improvement in Clinical Databases Using Statistical Quality Control: Review and Case Study. Therapeutic Innovation and Regulatory Science, 47(1), 70–81. https://doi.org/10.1177/2168479012469957

Azadeh, A., Ameli, M., Alisoltani, N., & Motevali Haghighi, S. (2016). A unique fuzzy multi-control approach for continuous quality improvement in a radio therapy department. Quality and Quantity, 50(6), 2469–2493. https://doi.org/10.1007/s11135-015-0272-3

Baskar, M. B., & Pragadeeswaran, S. (2013). International Journal of Management Research and Review International Logistics and Its Activities, 3(58), 2897–2903. Retrieved from www.ijmrr.com

Chauhan, C. S., Shah, S. C., & Bhatagalikar, S. P. (2013). Quality Improvement By Apply Seven Quality Control ( 7 QC ) Tool in Process Industry. International Journal for Scientific Research & Development, 1(10), 1–3.

Cloete, B. C., & Bester, A. (2012). A lean six sigma approach to the improvement of the selenium analysis method. Onderstepoort Journal of Veterinary Research, 79(1), 1–14. https://doi.org/10.4102/ojvr.v79i1.407

Desai, D. A., Kotadiya, P., Makwana, N., & Patel, S. (2015). Curbing variations in packaging process through six sigma way in a large-scale food-processing industry. Journal of Industrial Engineering International, 11(1), 119–129. https://doi.org/10.1007/s40092-014-0082-6

Deshpande, V. (2013). PDCA - Analysis for quality and productivity improvement in BISE plant of Apollo Tyres Limited Company. Productivity, 54(3), 311–324. Retrieved from https://www.researchgate.net/publication/296455489_PDCA_-Analysis_for_Quality_and_Productivity_improvement_in_BISE_plant_of_Apollo_Tyres_Limited_Company_Vivek_A_Deshpande

Diniaty, D. (2016). Analisis Kecacatan Produk Tiang Listrik Beton Menggunakan Metode Seven Tools dan New Seven Tools (Studi Kasus: PT. Kunango Jantan). Jurnal Teknik Industri: Jurnal Hasil Penelitian Dan Karya Ilmiah Dalam Bidang Teknik Industri, 2(2), 157. https://doi.org/10.24014/jti.v2i2.5102

Drake, D., Sutterfield, J., & Ngassam, C. (2008). The Revolution of Six-Sigma: An Analysis of Its Theory and Application. Journal of Management Information and Decision Sciences, 11(1), 29.

Febrianti, E., & Tools, S. (2019). ANALISIS PENGENDALIAN KUALITAS PRODUK POLYURETHANE SANDWICH PANEL DENGAN METODE OLD SEVEN TOOLS DI PT . ABC 2 . Produk yang diamati adalah Polyurethane Sandwich Panel . 3 . Data deffect pada produk Polyurethane Sandwich Panel hanya pada periode 1-31 Agust, 04(02).

Gadre, P. K., Jadhav, D. Pu. of S. Q. T. to I. Q. and P. in I., Gaikwad, S. G., & Jadhav, A. V. (2015). Use of Seven Quality Tools to Improve Quality and Productivity in Industry. IJSRD - International Journal for Scientific Research & Development|, 3(2), 59–62.

Ginting, R., & Fattah, M. G. (2020). Production quality control with new seven tools for defect minimization on PT. Dirgantara Indonesia. IOP Conference Series: Earth and Environmental Science, 452(1). https://doi.org/10.1088/1755-1315/452/1/012082

Ginting, Rosnani, Wanli, & Fauzi Malik, A. (2020). Crude Palm Oil Product Quality Control Using Seven Tools (case study: XYZ Company). IOP Conference Series: Materials Science and Engineering, 851(1). https://doi.org/10.1088/1757-899X/851/1/012046

Hardono, J., Pratama, H., & Friyatna, A. (2019). Analisis Cacat Produk Green Tyre dengan Pendekatan Seven Tools. Jurnal INTECH Teknik Industri Universitas Serang Raya, 5(1), 1. https://doi.org/10.30656/intech.v5i1.1462

Helia, V. N., & Suyoto, A. W. (2018). so that company using seven quality control tools to control the quality so that quality can be controlled and can find out the factors cause the occurrence of defects fix it. Jurnal Ilmiah Teknik Industri, 5(3), 148–156. https://doi.org/10.24912/jitiuntar.v5i3.2102

Idris, I., Sari, R. A., Wulandari, W., & U, W. (2016). Pengendalian Kualitas Tempe Dengan Metode Seven Tools. Teknovasi, 3(1), 66–80.

Ihsan, M., Hasanah, R., & Purba, H. H. (2019). Fanuc CNC machine damage analysis using the PDCA cycle and Kaizen implementation effort in increasing skill up operator performance in PT YPMI. Independent Journal of Management & Production, 10(1), 259. https://doi.org/10.14807/ijmp.v10i1.590

Isac, N. (2010). Principles of Tqm in Automotive Industry. Romanian Economic and Business Review, 5(4), 187–197.

Ivančić, V. (2014). Improving the Decision Making Process Trought the Pareto Principle Application. Ekonomska Misao i Praksa, (2), 633–656.

Joshi, A. A. (2015). A review on seven s (7S) as a tool of workplace organization. International Journal of Innovations in Engineering and Technology (IJIET), 6(2), 19–26.

Karapetrovic, S., & Rajamani, D. (1998). Approach to the application of statistical quality control techniques in engineering courses. Journal of Engineering Education, 87(3), 269–276. https://doi.org/10.1002/j.2168-9830.1998.tb00353.x

Karimi, K., Pallagi, E., Szabó-Révész, P., Csóka, I., & Ambrus, R. (2016). Development of a microparticle-based dry powder inhalation formulation of ciprofloxacin hydrochloride applying the quality by design approach. Drug Design, Development and Therapy, 10, 3331–3343. https://doi.org/10.2147/DDDT.S116443

Memon, I. A., Ali, A., Memon, M. A., Rajput, U. A., Ahmed, S., Abro, K., & Memon, A. A. (2019). Controlling the Defects of Paint Shop using Seven Quality Control Tools in an Automotive Factory. Technology & Applied Science Research, 9(6), 5062–5065. Retrieved from www.etasr.com

Mislan., Purba, H. H. (2020). Quality Control of Steel Deformed Bar Product using Statistical Quality Control (SQC) and Failure Mode and Effect Analysis (FMEA). IOP Conf. Ser.: Mater. Sci. Eng. 1007 012119. https://doi:10.1088/1757-899X/1007/1/012119

Morales, S. N., Adán Valles, C., Torres-Argüelles, V., Erwin Martínez, G., & Andrés Hernández, G. (2016). Six Sigma improvement project in a concrete block plant. Construction Innovation, 16(4), 526–544. https://doi.org/10.1108/CI-01-2015-0003

Muhammad, S. (2015). Quality Improvement Of Fan Manufacturing Industry By Using Basic Seven Tools Of Quality : A Case Study. Journal of Engineering Research and Applications Www.Ijera.Com, 5(4), 30–35. Retrieved from www.ijera.com

Neyestani, B. (2017). Seven Basic Tools of Quality Control: The Appropriate Techniques for Solving Quality Problems in the Organizations. SSRN Electronic Journal, 1–10. https://doi.org/10.2139/ssrn.2955721

Orynycz, O., Tucki, K., & Prystasz, M. (2020). Implementation of lean management as a tool for decrease of energy consumption and CO2 emissions in the fast food restaurant. Energies, 13(5). https://doi.org/10.3390/en13051184

Plsek, P. E. (1995). Techniques for managing quality. Hospital and Health Services Administration, 40(1), 50–79.

Prajapati, D. R. (2012). Implementation of SPC Techniques in Automotive Industry: A Case Study. International Journal of Emerging Technology and Advanced Engineering Website: Www.Ijetae.Com, 2(3), 227–241. Retrieved from http://www.ijetae.com/files/Volume2Issue4/IJETAE_0412_39.pdf

Pramono, S. N. W., Ulkhaq, M. M., Rachmadina, D. P., Trianto, R., Rachmadani, A. P., Wijayanti, W. R., & Dewi, W. R. (2018). The use of quality management techniques: The application of the new seven tools. International Journal of Applied Science and Engineering, 15(2), 105–112. https://doi.org/10.6703/IJASE.201810_15(2).105

Ratnadi, & Suprianto, E. (2016). Pengendalian Kualitas Produksi Menggunakan Alat Bantu Statistik (Seven Tools) Dalam Upaya Menekan Tingkat Kerusakan Produk. Indept, 6(2), 10–18.

Realyvásquez-Vargas, A., Arredondo-Soto, K. C., Carrillo-Gutiérrez, T., & Ravelo, G. (2018). Applying the Plan-Do-Check-Act (PDCA) cycle to reduce the defects in the manufacturing industry. A case study. Applied Sciences (Switzerland), 8(11). https://doi.org/10.3390/app8112181

Realyvásquez-Vargas, A., Arredondo-Soto, K. C., García-Alcaraz, J. L., & Macías, E. J. (2020). Improving a manufacturing process using the 8ds method. A case study in a manufacturing company. Applied Sciences (Switzerland), 10(7). https://doi.org/10.3390/app10072433

Rosyidi, M. R., & Hermanto, H. (2018). Analisis Kualitas Ikan Bandeng Dengan Metode Seven Tools Ditempat Pelelangan Ikan ( Tpi ) Lumpur Gresik. Program Studi Teknik Industri, Sekolah Tinggi Teknik Qomaruddin Gresik, 1(2), 84.

Sanny, L., & Amalia, R. (2015). Quality improvement strategy to defect reduction with seven tools method: Case in food field company in Indonesia. International Business Management, 9(4), 445–451. https://doi.org/10.3923/ibm.2015.445.451

SchÖtz, S., Rosemann, B., & Reiser, S. E. (2019). Relevant Data When Implementing Tools of Quality in Cyber-Physical Systems. Proceedings in Manufacturing Systems, 14(2), 43–48. Retrieved from https://search.proquest.com/docview/2309325930?accountid=26540%0Ahttp://link.periodicos.capes.gov.br/sfxlcl41?url_ver=Z39.88-2004&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&genre=article&sid=ProQ:ProQ%3Aengineeringjournals&atitle=RELEVANT+DATA+WHEN+IMPLEMEN

Shahin, A., Mazaher, G., & Arabzad, S. M. (2010). Proposing an Integrated Framework of Seven Basic and New Quality Management Tools and Techniques: A Roadmap. Research Journal of Internatıonal Studıes-Issue, 17(17), 183–195. https://doi.org/10.13140/2.1.2408.5125

Sharma, V. (2016). Service Management–A Growing Field of Interest among Young Entrepreneurs. MET Management Retrospect, 01(03), 23–33. Retrieved from http://metbhujbalknowledgecity.ac.in/MET DATA/IOM/retrospect03.pdf#page=27

Shih, B.-Y., Chen, C.-Y., Chen, Z.-S., Sugimori, Y., Kusunoki, K., Cho, F., … Yang, T. (2013). QL-OxGSM9Bb.pdf. Applied Mechanics and Materials, 26(1), 553–564. Retrieved from https://doi.org/10.1016/j.eswax.2019.100015%0Ahttp://dx.doi.org/10.1016/j.sbspro.2015.06.481%0Ahttps://doi.org/10.1016/j.promfg.2019.06.077%0Ahttps://www.leancompetency.org/wp-content/uploads/2015/09/Value-Stream-Mapping-seven-tools.pdf%0Ahttps://doi.org/

Stadnicka, D. (2015). Setup analysis: Combining SMED with other tools. Management and Production Engineering Review, 6(1), 36–50. https://doi.org/10.1515/mper-2015-0006

Stephenson, T. (2001). Application of lean tools in a machine shop environment. SAE Technical Papers, 28(May), 176–189. https://doi.org/10.4271/2001-01-2599

Stîngă, F., Severin, I., Mitrache, I. A., & Lascu, E. (2020). Redesign of the curing area of the tire manufacturing process. Sustainability (Switzerland), 12(17). https://doi.org/10.3390/SU12176909

Suryoputro, M. R., Sugarindra, M., & Erfaisalsyah, H. (2017). Quality Control System using Simple Implementation of Seven Tools for Batik Textile Manufacturing. IOP Conference Series: Materials Science and Engineering, 215(1), 0–10. https://doi.org/10.1088/1757-899X/215/1/012028

Sweis, R., Moarefi, A., Amiri, M. H., Moarefi, S., & Saleh, R. (2019). Causes of delay in Iranian oil and gas projects: a root cause analysis. International Journal of Energy Sector Management, 13(3), 630–650. https://doi.org/10.1108/IJESM-04-2018-0014

Tarhan, A., & Demirors, O. (2011). Investigating the effect of variations in the test development process: A case from a safety-critical system. Software Quality Journal, 19(4), 615–642. https://doi.org/10.1007/s11219-011-9129-8

Zdrazil, P., & Applova, P. (2017). Visual evaluation of changes in regional growth and disparities: Usage of a Pareto chart. Scientific Papers of the University of Pardubice, Series D: Faculty of Economics and Administration, 24(41), 230–242.

DOI: http://dx.doi.org/10.22441/ijiem.v3i1.13551


Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

IJIEM - Indonesian Journal of Industrial Engineering & Management
Program Pascasarjana Magister Teknik Industri Universitas Mercu Buana
Kampus Menteng - Gedung Tedja Buana, Floor 4th  
Jl. Menteng Raya No. 29  Jakarta Pusat- Indonesia
Tlp.: +62 21 31935454 Fax: +62  21 31934474

Email:  ijiem@mercubuana.ac.id


Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.


Web Analytics Made Easy - Statcounter View My Stats

The journal is indexed by: