Implementation of Measurement System Analysis to Reduce Measurement Process Failures on Part Reinf BK6

Fredy Sumasto, Yesaya Abdi Nugroho, B. Handoko Purwojatmiko, Mohammad Wirandi, Febriza Imansuri, Siti Aisyah

Abstract


This study aims to reduce the failure of the measurement process on Part Reinf BK6 in the automotive industry which prioritizes accuracy and precision in the process to maintain product quality and customer satisfaction. This study used the measurement system analysis (MSA) method to analyze the Gage R&R on a measurement system, with 2 operators and 10 parts measured with 3 repetitions. The MSA results before improvement showed a Total Gage R&R of 67.80% with a repeatability value of 0.98% and a reproducibility value of 66.82%. The result indicated that the measurement system needs to be improved because the Gage R&R is still above 30%. After improving the measurement process by adding the Go No Go pin as an additional tool, the MSA results show the Total Gage R&R value after the improvement is made to 10.11% with repeatability and reproducibility values of 10.11% and 0% respectively. Based on the results of the study, it can be concluded that the improvements made have a significant effect on the measurement system on Part Reinf BK6. This will improve accuracy and precision in the measurement process, maintain product quality, and increase customer satisfaction. Therefore, improving the measurement system is very important in the automotive industry.

Keywords


ANOVA; Automotive Part; MSA; Quality

Full Text:

PDF

References


Al-Refaie, A., & Bata, N. (2010). Evaluating measurement and process capabilities by GR&R with four quality measures. Measurement: Journal of the International Measurement Confederation, 43(6), 842–851. https://doi.org/10.1016/j.measurement.2010.02.016

Aslam, M., & Bantan, R. A. R. (2020). A study on measurement system analysis in the presence of indeterminacy. Measurement: Journal of the International Measurement Confederation, 166, 108201. https://doi.org/10.1016/j.measurement.2020.108201

Budiantono, S., Mumpuni Retnaningsih, S., & Fitra Aksioma Jurusan Statistika, D. (2016). Measurement System Analysis Repeatability dan Reproducibility (Gauge R&R) pada Alat Vickers Hardness Tester Di PT Jaykay Files Indonesia. Jurnal Sains Dan Seni Its, 5(2), 2337–3520.

Cepova, L., Kovacikova, A., Cep, R., Klaput, P., & Mizera, O. (2018). Measurement System Analyses - Gauge Repeatability and Reproducibility Methods. Measurement Science Review, 18(1), 20–27. https://doi.org/10.1515/msr-2018-0004

Chenoy, D., Ghosh, S. M., & Shukla, S. K. (2019). Skill development for accelerating the manufacturing sector: the role of ‘new-age’ skills for ‘Make in India.’ International Journal of Training Research, 17(sup1), 112–130. https://doi.org/10.1080/14480220.2019.1639294

Down, M., Czubak, F., Gruska, G., Stahley, S., & Benham, D. (2010). Measurement System Analysis (4th ed.). General Motors Corporation.

Ferreira, I. S. B., Peruchi, R. S., Fernandes, N. J., & Rotella Junior, P. (2021). Measurement system analysis in angle of repose of fertilizers with distinct granulometries. Measurement: Journal of the International Measurement Confederation, 170(May 2020), 108681. https://doi.org/10.1016/j.measurement.2020.108681

Fu, Q. (2022). How does digital technology affect manufacturing upgrading? Theory and evidence from China. PLoS ONE, 17(5 May), 1–18. https://doi.org/10.1371/journal.pone.0267299

Huda, H., & Islahudin, N. (2021). Measurment System Analysis Pada Operator Pengecekan Visual Menggunakan Metode Attribute Agreement System Di Industri Manufaktur. JISI: Jurnal Integrasi Sistem Industri, 8(2), 35. https://doi.org/10.24853/jisi.8.2.35-40

Jaiganesh, V., Surya, G. S., Shanker, B., Kumarr, J. S., & Sownder, S. (2011). Applying gauge repeatability and reproducibility analysis for a cast dimesion in a foundry-a case study. Indian Foundry J., 57(3), 37 – 43. https://www.scopus.com/inward/record.uri?eid=2-s2.0-85041461150&partnerID=40&md5=0f07cb8d5dc67afa894d4b623612bbc3

Ming, P. (2016). Research on the Core Technology and the Development Tendency of Modern Precision Machinery Manufacturing. 4th International Conference on Mechanical Materials and Manufacturing Engineering (MMME 2016), Mmme. https://doi.org/10.2991/mmme-16.2016.157

Mohamed, N., & Davahran, Y. (2006). Measurement System Analysis Using Repeatability and Reproducibility Techniques. Statistika, 6(1), 37–41.

Pinthapataya, J. (2022). Guidelines To Improve Manpower Potential In The Manufacturing Industry In The Area Of The Eastern Economic Corridor : A Case Study Of The Rail Industry. Journal of Positive School Psychology, 6(11), 61–74.

Saikaew, C. (2018). An implementation of measurement system analysis for assessment of machine and part variations in turning operation. Measurement: Journal of the International Measurement Confederation, 118, 246–252. https://doi.org/10.1016/j.measurement.2018.01.008

Setiawan, Y., & Rahardjo, D. J. (2013). Implementasi Iso / Ts 16949 : 2009. Jurnal Titra, 1(1), 21–26.

Setyabudhi, A. L., Veza, O., Meldra, D., Abdurahman, N. C., & Reza Saputra, M. R. (2021). Penerapan Metode Measurement System Analysis Gage R&R Pada Pengukuran Produk Base Plate Magazine. Jurnal Rekayasa Sistem Industri, 6(2), 86–89. https://doi.org/10.33884/jrsi.v6i2.3642

Shao, C., Wang, H., Suriano-Puchala, S., & Hu, S. J. (2019). Engineering fusion spatial modeling to enable areal measurement system analysis for optical surface metrology. Measurement: Journal of the International Measurement Confederation, 136, 163–172. https://doi.org/10.1016/j.measurement.2018.12.061

Sumasto, F., Satria, P., & Rusmiati, E. (2022). Implementasi Pendekatan DMAIC untuk Quality Improvement pada Industri Manufaktur Kereta Api. Jurnal INTECH Teknik Industri Universitas Serang Raya, 8(2), 161–170. https://doi.org/doi.org/10.30656/intech.v8i2.4734

Wijanarko, H., Saputra, A. W., Suciningtyas, I. K. L. N., & Fatekha, R. A. (2022). An Implementation of Measurement System Analysis for IoT-Based Waste Management Development. Jurnal Rekayasa Elektrika, 18(4). https://doi.org/10.17529/jre.v18i4.26910




DOI: http://dx.doi.org/10.22441/ijiem.v4i2.20212

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

IJIEM - Indonesian Journal of Industrial Engineering & Management
Program Pascasarjana Magister Teknik Industri Universitas Mercu Buana
Kampus Menteng - Gedung Tedja Buana, Floor 4th  
Jl. Menteng Raya No. 29  Jakarta Pusat- Indonesia
Tlp.: +62 21 31935454 Fax: +62  21 31934474
http://publikasi.mercubuana.ac.id/index.php/ijiem

Email:  [email protected]

 

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

 

Web Analytics Made Easy - Statcounter View My Stats

The journal is indexed by: