Ergonomic Analysis of Working Positions in Petis Processing with the RULA Method at UD Murni Sidoarjo

Dimas Immannulloh; Tranggono Tranggono

doi:10.22441/ijiem.v5i2.22381

Authors

Dimas Immannulloh Department of Industrial Engineering, Faculty of Engineering, Universitas Pembangunan Nasional “Veteran” Jawa Timur, Jl. Rungkut Madya No.1 Gunung Anyar, Surabaya 60294, Indonesia
Tranggono Tranggono Department of Industrial Engineering, Faculty of Engineering, Universitas Pembangunan Nasional “Veteran” Jawa Timur, Jl. Rungkut Madya No.1 Gunung Anyar, Surabaya 60294, Indonesia

DOI:

https://doi.org/10.22441/ijiem.v5i2.22381

Keywords:

RULA, Ergonomic, CATIA, Musculosceletal disorders, Solidworks

Abstract

UD Murni Sidoarjo is a company that focus on making petis as traditional food of Sidoarjo. But, often they experience ergonomic problems which results in Work Related Musculoskeletal Disorders (WRMSDs) for their workers. The method that used in this study, namely Rapid Upper Limb Assesment (RULA) which is a method for assessing posture, style, and movement of an activity related to upper limb users. The main objective in this study is to analyze the working postures of filters sector from petis processing industry by using Rapid Upper Limb Assesment (RULA) in CATIA V5R21 software. 5 out of 5 workers postures from filters sector indicated a high risk score of 6, indicating changes in the posture is needed to be done. Tool design with ergonomic interventions are suggested and the improved posture was evaluated using Conventional RULA Asessment and CATIA V5R21 software. From 2 asessment, the posture indicated a score of 3, indicating low risk. The results from this study indicate that awkward working posture risks can be minimized effectively using ergonomic interventions with design of working tools in solidworks software that being analyzed with CATIA V5R21 software. The limitation of this study is the tool that had been design is not used by real workers, the design of the tool is only emplimented into CATIA V5R21 software which is used for RULA asessment, the design can be realized by any future researcher for another impact not just posture but also production, performance, and the others.

Downloads

Download data is not yet available.

References

Abinaya Ishwarya, G. K., & Rajkumar, D. (2021). Analysis of ergonomic risk factors in construction industry. Materials Today: Proceedings, 37, 2415–2418. https://doi.org/10.1016/j.matpr.2020.08.269

Colim, A., Carneiro, P., Costa, N., Arezes, P. M., & Sousa, N. (2019). Ergonomic Assessment and Workstation Design in a Furniture Manufacturing Industry—A Case Study. In P. M. Arezes, J. S. Baptista, M. P. Barroso, P. Carneiro, P. Cordeiro, N. Costa, R. B. Melo, A. S. Miguel, & G. Perestrelo (Eds.), Occupational and Environmental Safety and Health (Vol. 202, pp. 409–417). Springer International Publishing. https://doi.org/10.1007/978-3-030-14730-3_44

Dewi, Nur Fadilah. (2020). Identifikasi Risiko Ergonomi dengan Metode Nordic Body Map Terhadap Perawat Poli RS X. Jurnal Sosial Humaniora Terapan, 2(2). https://doi.org/10.7454/jsht.v2i2.90

Dina, D. M., & Purba, A. (2022). Occupational Health and Safety Risk Analysis in Construction Projects: A Systematic Literature Review. 3(1).

Gómez-Galán, M., Callejón-Ferre, Á.-J., Pérez-Alonso, J., Díaz-Pérez, M., & Carrillo-Castrillo, J.-A. (2020). Musculoskeletal Risks: RULA Bibliometric Review. International Journal of Environmental Research and Public Health, 17(12), 4354. https://doi.org/10.3390/ijerph17124354

Herlambang, H. (2020). Improving Process Capability of The Electronics Component Company Through SMED. IJIEM - Indonesian Journal of Industrial Engineering and Management, 1(3), 167. https://doi.org/10.22441/ijiem.v1i3.10236

Kurnia, F., & Sobirin, M. (2020). Analisis Tingkat Kualitas Postur Pengemudi Becak Menggunakan Metode RULA dan REBA. 4(1).

Mardiana, D. P., Pujianto, M. R., & Sulistyo, S. (2020). PERANCANGAN KURSI RODA ERGONOMIS UNTUK ORANG MANULA. Journal of Industrial Engineering and Technology, 1(1), 11–17. https://doi.org/10.24176/jointtech.v1i1.5618

Ramdan, I. M., & Azahra, A. (2020). Menurunkan Keluhan Gangguan Muskuloskeletal Pada Penenun Tradisional Sarung Samarinda Melalui Pelatihan Peregangan Otot di Tempat Kerja. Jurnal Abdimas BSI: Jurnal Pengabdian Kepada Masyarakat, 3(2), 109–117. https://doi.org/10.31294/jabdimas.v3i2.7508

Rojas-Sola, J. I., del Río-Cidoncha, G., Ortíz-Marín, R., & López-Pedregal, J. M. (2020). Design and Development of Sheet-Metal Elbows Using Programming with Visual Basic for Applications in CATIA. Symmetry, 13(1), 33. https://doi.org/10.3390/sym13010033

Salim, G., Suoth, L. F., & Malonda, N. S. H. (2019). HUBUNGAN ANTARA KELELAHAN KERJA DENGAN STRES KERJA PADA SOPIR ANGKUTAN UMUM TRAYEK KAROMBASAN – MALALAYANG KOTA MANADO. 8(7).

Sutadi, L. Y., & Putra, B. A. (2022). DESAIN MESIN PENGADUK ADONAN PETIS SEMI OTOMATIS KAPASITAS 50 KG SETIAP PROSES.

Taufik, D. A. (2020). PDCA Cycle Method implementation in Industries: A Systematic Literature Review. IJIEM - Indonesian Journal of Industrial Engineering and Management, 1(3), 157. https://doi.org/10.22441/ijiem.v1i3.10244

Tjahayuningtyas, A. (2019). FAKTOR YANG MEMPENGARUHI KELUHAN MUSCULOSKELETAL DISORDERS (MSDs) PADA PEKERJA INFORMAL. The Indonesian Journal of Occupational Safety and Health, 8(1), 1. https://doi.org/10.20473/ijosh.v8i1.2019.1-10

Winata, E. K., & Suryadi, A. (2020). PERANCANGAN KURSI TUNGGU YANG ERGONOMIS UNTUK LANSIA DENGAN METODE PAHL AND BEITZ PADA KLINIK XYZ SIDOARJO. JUMINTEN, 1(6), 61–72. https://doi.org/10.33005/juminten.v1i6.130

Yasa, M. C., Budiman, R., & Islam, U. (2022). PELATIHAN DESAIN SOLIDWORKS 2D & 3D KEPADA SISWA MENENGAH KEJURUAN DI DESA SEGARAN. 01(03), 93–99.