Product Development of Urban Aquaculture Supporting Equipment Based on Solar Cell Technology and Speed Bump System Using the Design For Manufacture and Assembly (DFMA) Method

Isna Nugraha; Tranggono Tranggono; Yekti Condro Winursito; Sinta Dewi; Hafid Syaifullah; Mega Cattleya Prameswari Annissaa Islami

doi:10.22441/ijiem.v5i3.24194

Product Development of Urban Aquaculture Supporting Equipment Based on Solar Cell Technology and Speed Bump System Using the Design For Manufacture and Assembly (DFMA) Method

Isna Nugraha, Tranggono Tranggono, Yekti Condro Winursito, Sinta Dewi, Hafid Syaifullah, Mega Cattleya Prameswari Annissaa Islami

Abstract

Urban aquaculture, like urban farming, entails using aquaculture technology to transform tiny, previously unutilized pieces of land in highly inhabited metropolitan areas into a useful area. Urban aquaculture, in broad terms, can be defined as the fish farming on small plots of land. Depending on the sort of consumable fish commodity to be grown, urban aquaculture can be implemented through home aquaculture and community aquaculture utilizing a variety of techniques. Creating a mandatory product involves the stages of development and design. At this stage, all product components, production costs, design, and assembly time are taken into account. Through sustainable product design and evaluation, it is possible to address the assembly performance and difficulties in the assembly process, as well as assembly time and costs. The design and development of this product use the Design for Manufacturing and Assembly (DFMA) method. DFMA is a method used to determine the product design with the best time and cost. In general, this method can also be used in development to improve the quality and measure the improvement of urban aquaculture product designs. It is hoped that urban aquaculture will provide an alternative product design to achieve high-quality products and low production costs.

Keywords

Solar cell technology; Speed bump; Renewable energy; Design for manufacture and assembly; Urban aquaculture

Full Text:

PDF

References

Abdillah, A., Widianingsih, I., Buchari, R. A., & Nurasa, H. (2023). Implications of urban farming on urban resilience in Indonesia: Systematic literature review and research identification. Cogent Food & Agriculture, 9(1), 2216484. https://doi.org/10.1080/23311932.2023.2216484

Abdurrohman, A., Arkasala, F. F., & Nurhidayah, N. (2021). Penerapan Konsep Urban Farming-Based Resilient City Dalam Pengembangan Kota Yang Berketahananan Pangan di Kota Surakarta. Desa-Kota: Jurnal Perencanaan Wilayah, Kota, Dan Permukiman, 3(2), 162–170. https://doi.org/10.20961/desa-kota.v3i2.48012.162-170

Abrishami, S., & Martín-Durán, R. (2021). BIM and DfMA: a paradigm of new opportunities. Sustainability, 13(17), 9591. https://doi.org/10.3390/su13179591

Apriadi, F., & Prayogi, E. (2022). Proses Manufaktur Pembangkit Listrik Tenaga Mikrohidro. Jurnal Ilmiah Teknik Mesin, 10(1), 1–7. https://doi.org/10.33558/jitm.v10i1.2982

Bao, Z., Laovisutthichai, V., Tan, T., Wang, Q., & Lu, W. (2022). Design for manufacture and assembly (DfMA) enablers for offsite interior design and construction. Building Research & Information, 50(3), 325–338. https://doi.org/10.1080/09613218.2021.1966734

Barbosa, G. F., & Carvalho, J. de. (2014). Guideline tool based on design for manufacturing and assembly (DFMA) methodology for application on design and manufacturing of aircrafts. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 36, 605–614. https://doi.org/10.1007/s40430-013-0103-1

Butt, J., & Jedi, S. (2020). Redesign of an in-market conveyor system for manufacturing cost reduction and design efficiency using DFMA methodology. Designs, 4(1), 6. https://doi.org/10.3390/designs4010006

Gao, S., Jin, R., & Lu, W. (2020). Design for manufacture and assembly in construction: a review. Building Research & Information, 48(5), 538–550. https://doi.org/10.1080/09613218.2019.1660608

Ginting, R., & Ricky, J. (2021). Perbaikan Rancangan Produk Topi Pijat dengan Menggunakan Metode Design For Manufacture and Assembly (DFMA). Talenta Conference Series: Energy and Engineering (EE), 4(1). https://doi.org/10.32734/ee.v4i1.1229

Jung, S., & Yu, J. (2022). Design for Manufacturing and Assembly (DfMA) Checklists for Off-Site Construction (OSC) Projects. Sustainability, 14(19), 11988. https://doi.org/10.3390/su141911988

Lu, W., Tan, T., Xu, J., Wang, J., Chen, K., Gao, S., & Xue, F. (2021). Design for manufacture and assembly (DfMA) in construction: The old and the new. Architectural Engineering and Design Management, 17(1–2), 77–91. https://doi.org/10.1080/17452007.2020.1768505

Munanda, M. A., & Ramadhana, T. Y. (2020). Perancangan Keran Air Automatis Dengan Pelampung Vertikal Dengan Metode Design For Manufacturing And Assembly (DFMA). Jurnal Teknik Mesin, 8(2), 44–46. https://doi.org/10.24815/jtm.v8i2.19537

Naiju, C. D. (2021). DFMA for product designers: A review. Materials Today: Proceedings, 46, 7473–7478. https://doi.org/10.1016/j.matpr.2021.01.134

Nasution, M. Y. (2021). Mesin Pencacah Perancangan Mesin Pencacah Pelepah Sawit untuk Pakan Ternak dengan Menggunakan Metode DFMA (Design For Manufacture Andassembly): Pelepah. Aptek, 14–20. https://doi.org/10.30606/aptek.v13i1.498

Nazarudin, M. E., & Suryadi, A. (2021). Pengembangan Produk Wastafel Portable Secara Manual Dengan Metode Design For Manufacture And Assembly (DFMA). Juminten, 2(2), 36–47. https://doi.org/10.33005/juminten.v2i2.228

Nugraha, I., Hisjam, M., & Sutopo, W. (2019). Sustainable Criteria in Supplier Evaluation of the Food Industry. Annual Conference on Industrial and System Engineering (ACISE). IOP Conf. Series: Materials Science and Engineering, 985(012006). https://doi.org/10.1088/1757-899X/598/1/012006

Priadythama, I., Susmartini, S., & Nugroho, A. W. (2017). Penerapan DFMA untuk Low Cost High Customization Product. Performa: Media Ilmiah Teknik Industri, 16(1). https://doi.org/10.20961/performa.16.1.12740

Surya, B., Syafri, S., Hadijah, H., Baharuddin, B., Fitriyah, A. T., & Sakti, H. H. (2020). Management of slum-based urban farming and economic empowerment of the community of Makassar City, South Sulawesi, Indonesia. Sustainability, 12(18), 7324. https://doi.org/10.3390/su12187324

Xin, T. J., Farizuan, R. M., Radhwan, H., Shayfull, Z., & Fathullah, M. (2019). Redesign of drone remote control using design for manufacturing and assembly (DFMA) method. AIP Conference Proceedings, 2129(1). https://doi.org/10.1063/1.5118167

Yuan, Z., Peng, T., An, D., Cristea, D., & Pop, M. A. (2020). Rolling bearing fault diagnosis based on adaptive smooth ITD and MF-DFA method. Journal of Low Frequency Noise, Vibration and Active Control, 39(4), 968–986. https://doi.org/10.1177/1461348419867012

DOI: http://dx.doi.org/10.22441/ijiem.v5i3.24194

Refbacks

There are currently no refbacks.

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

IJIEM - Indonesian Journal of Industrial Engineering & Management
Program Pascasarjana Magister Teknik Industri Universitas Mercu Buana
Kampus Menteng - Gedung Tedja Buana, Floor 4^th
Jl. Menteng Raya No. 29 Jakarta Pusat- Indonesia
Tlp.: +62 21 31935454 Fax: +62 21 31934474
http://publikasi.mercubuana.ac.id/index.php/ijiem

Email: [email protected]

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.