Quality Control Analysis of Cover Flange Products with Six Sigma Approach at PT. SMI
DOI:
https://doi.org/10.22441/ijiem.v6i2.28622Kata Kunci:
Quality, Control, Six sigma, 5SAbstrak
PT. SMI is a manufacturing company engaged in manufacturing services specializing in heavy equipment components. In the production process activities there are still several factors that cause a product that has been produced not in accordance with predetermined specifications. Therefore, this study aims to determine the types and factors that can cause deffects and provide proposals for improving the Cover Flange at PT. SMI. The method used is the Six Sigma DMAIC method (Define, Measure, Analyze, Improve, Control) which is quality control to minimize the number of defective products. Based on the results of data processing analysis, there are still data that are still outside the control limits. Therefore, the production process still has to be improved in order to improve quality. The DPMO (Defect Per Million Opportunities) value before improvement is 106456 and the sigma value is 2.70. The proposed improvement used in this study is to use the 5S method (Seiri, Seiton, Seiso, Seikersu, Shitshuke) So, the results obtained after applying the 5S method are a reduction in the DPMO value of 51579 and a sigma value of 3.15 with a reduction in the number of defective Cover Flange products, so with the improvement being able to provide changes in the DPMO value and sigma value of PT. SMI.
Unduhan
Referensi
Ahmad, F. (2019). Six Sigma DMAIC Sebagai Metode Pengendalian Kualitas Produk Kursi pada UKM. JISI: Jurnal Integrasi Sistem Industri, 6(1), 11-17. https://doi.org/10.24853/jisi.6.1.11-17
Anthony, K. C. (2022). Pengendalian Kualitas Produk Percetakan Kemasan Obat Dengan Metode Six Sigma Di Cv. Cemerlang Abadi Sejahtera Offset (Doctoral dissertation, Universitas Komputer Indonesia). https://elibrary.unikom.ac.id/id/eprint/7428/
Ayu Lestari, F., & Purwatmini, N. (2021). Pengendalian Kualitas Produk Tekstil Menggunakan Metoda DMAIC. 5(1). http://ejournal.bsi.ac.id/ejurnal/index.php/ecodemica
Farid, M., Yulius, H., Irsan, I., Susriyati, S., & Maulana, B. (2022). Pengendalian Kualitas Pengolahan Kulit Uptd Kota Padang Panjang Menggunakan Metode Six-Sigma. Jurnal Teknologi Dan Sistem Informasi Bisnis, 4(1), 186-192. http://jurnal.unidha.ac.id/index.php/jteksis/article/view/399
Harahap, B., Parinduri, L., Ama, A., & Fitria, L. (2018). Analisis Pengendalian Kualitas Dengan Menggunakan Metode Six Sigma (Studi Kasus: PT. Growth Sumatra Industry). Buletin Utama Teknik, 13(3), 211-218. https://jurnaltest.uisu.ac.id/index.html/but/article/view/541
Mauluddin, Y., & Nurwahidah, M. (2022). Rancangan Pengendalian Kualitas Pada Produk Roti Dalam Upaya Peningkatan Kualitas Produk Di CV. Sari Madani. Jurnal Kalibrasi, 20(1), 32-43. https://jurnal.itg.ac.id/index.php/kalibrasi/article/view/1116
Merjani, A., & Siahaan, N. I. (2022b). Pengendalian Kualitas Dengan Metode Six Sigma DMAIC Pada Produk Top Body Cover Fast 5280 Untuk Mengurangi Customer Complain (Studi Kasus: PT. Batam Xingrui Teknologi). Profisiensi, 10(1), 49–54. https://doi.org/10.33373/profis.v10i1.3865
Nurhayani, N., Putri, S. R., & Darmawan, A. (2023). Analisis Pengendalian Kualitas Produk Outsole Sepatu Casual menggunakan Metode Six Sigma DMAIC dan Kaizen 6S. Jurnal Teknik Industri: Jurnal Hasil Penelitian dan Karya Ilmiah dalam Bidang Teknik Industri, 9(1), 248-258. https://ejournal.uin-suska.ac.id/index.php/jti/article/view/22449
R, P. D. A. (2020). Analisis Proses Pengendalian Kualitas Minyak Kelapa Sawit (CPO) dengan Metode Six Sigma Pada PT. Perkebunan Nusantara V Sei Garo. Pekan Baru. Skripsi: Universitas Islam Riau. https://repository.uir.ac.id/8971/1/155210721
Rivaldy, Z. A. (2022). Pengendalian Kualitas Produk Kantong Plastik Menggunakan Metode Six Sigma (Studi Kasus: Cv Makmur Raya Sejahtera). Tugas Akhir: Universitas Islam Indonesia. https://dspace.uii.ac.id/handle/123456789/39001
Singgih, M. L., & Renanda, D. (2008). Peningkatan Kualitas Produk Kertas Dengan Menggunakan Pendekatan Six Sigma di Pabrik Kertas Y. Personal paper: Institut Teknologi Sepuluh Nopember. https://www.researchgate.net/profile/Moses-Singgih/publication/267296642
Subahagia Ningsih, M., & Mada, E. (2018). Metode Six Sigma untuk Mengendalikan Kualitas Produk Surat Kabar di PT X. JURITI PRIMA (Jurnal Ilmiah Teknik Industri Prima), 2(1), 15-21. https://doi.org/10.5281/zenodo.1211889
Syahputra, R. D. (2023). Analisis Six Sigma Dalam Peningkatan Kualitas Produk Crude Palm Oil (Cpo) Guna Meminimalisir Defect (Studi Kasus: PT. Peputra Masterindo). Tugas Akhir: Universitas Islam Indonesia https://dspace.uii.ac.id/handle/123456789/44508
Zikrah, Z. (2022). Analisis Pengendalian Kualitas Pada Produk Jersey Dengan Metode Six Sigma Di Cv. Vinus Company (Doctoral dissertation, Universitas Komputer Indonesia). https://elibrary.unikom.ac.id/id/eprint/7440/
Samsudin, A. E. P., Wijaya, D. K., & Islahudin, N. (2023). Perbaikan proses printing menggunakan metode DMAIC dan 5S untuk mengurangi waste proses di UKM limit screen printing Semarang. JENIUS: Jurnal Terapan Teknik Industri, 4(1), 98-107. https://www.jurnal.sttmcileungsi.ac.id/index.php/jenius/article/view/468
Unduhan
File Tambahan
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
