Faktor Kunci Sukses Penerapan Value Engineering (Ve) Pada Bangunan Gedung Di Indonesia
Keywords:
value engineering, faktor kunci sukses, nilai, biaya, fungsi, analisis deskriptifAbstract
Penerapan VE di Indonesia kurang berkembang dengan baik karena masih banyaknya permasalahan yang dihadapi, kurang berkembangnya penerapan VE di Indonesia diantaranya peraturan perundangan dalam pelaksanaan dan adanya beberapa konsep seperti definisi VE, nilai (value), biaya (cost), fungsi, manfaat (worth) dan faktor kunci sukses penerapan VE tidak sepenuhnya dipahami dengan benar. Pada penelitiaan ini akan dilakukan identifikasi apa yang menjadi faktor kunci sukses penerapan Value Engineering pada proyek bangunan gedung di Indonesia dengan studi kasus proyek-proyek yang ada di daerah DKI Jakarta dan Kota Bandung. Metode yang digunakan pada penelitian ini yaitu dengan analisi deskriftip. Hasil yang diharapkan dari penelitian ini diketahuinya faktor kunci sukses penerapan VE dan faktor yang paling dominan.
Downloads
References
. Abduh, M. (2005), “Konstruksi Ramping: Memaksimalkan Value dan
Meminimalkan Waste”, Prosiding Pendidikan Manajemen dan Rekayasa
Konstruksi di Indonesia, Fakultas Teknik Sipil dan Lingkungan, ITB.
. Berawi, M. A. (2014), Aplikasi Value Engineering. Jakarta. UI-Press.
. Budisuanda, (2013), “Apa itu Critical Success Factors (CSFs) Bagi Proyek”, http://manajemenproyekindonesia.com /?p=2518, (diakses tanggal 11 April 2017).
. Chougule, M. A. dan Kallurkar, S. P. (2014), “Application of Value Engineering for Cost Reduction of Household Furniture Product - A Case Study”. IJIRSET, ISSN: 2319-8753 Vol. 3, Issue 10. DOI: 10.15680/
IJIRSET.2014.0310024
. Fangidae, Y. J. C. (2006), “Penerapan Value Engineering pada Proyek Konstruksi”, Thesis-Unpublished, Universitas Kristen-Petra, Surabaya.
. Furqon, (1997). Statistika Terapan untuk Penelitian, CV, Alfabeta, Bandung
. Ikhsan, S. (2011), “Critical Success Factor Penerapan Value Engineering pada Tahap Konstruksi Bangunan Gedung pada PT. X”, Tesis, Universitas Indonesia.
. Kaming, F. P. dan Elfran, B. P. (2013), “Penerapan Value Engineering (VE) oleh Kontraktor dan Konsultan Indonesia” Prosiding Konferensi
Nasional Teknik Sipil 7, Universitas Sebelas Maret (UNS) - Surakarta, 24-
Oktober.
. Kelly, J., Male, S., & Graham, D. (2004). Value Management of Construction Projects. London, Blackwell Science Ltd.
. Mahadik, U. A. (2015), “Value Engineering For Cost Reduction and Sustainability in Construction Projects”, IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), e-ISSN : 2278-1684, p-ISSN : 2320–334X PP 95-97.
. Mantap, B., Hari, N. N. dan Fitri, S. (2014), “Value Engineering pada Bangunan Gedung Kampus III Universitas Prof. DR. Hazairin, SH Kota Bengkulu, Proyek Konstruksi”. Universitas Persada Indonesia-YAI, Jakarta. Email: [email protected].
. Priyanto, S., Hadi, S. dan Haryono, (2016), “Value engineering dan strategi bisnis pada PT. Angkasa Pura II”, Jurnal Manajemen Transportasi & Logistik (JMTranslog) - Vol. 03 No. 2, Juli 2016, ISSN 2355-4721.
. Rane, N. L. dan Attarde, P.M. (2016), “Application of Value Engineering in Commercial Building Projects”, International Jornal Of Latest trends in engineering and Technology (IJLTET) ISSN 2278-621X Vol. 6 Issue 3 Jan.
. Robinson, J. L. (2008), “Value Added Stategies to Sustain a Succesfull Value Inprovment Program”, Value World, Volume 31, number 3, fall 2008, hal 19-25.
. Rumintang, A. (2008), “Analisa Rekayasa Nilai Pekerjaan Struktur Gedung Teknik Informatika UPN “Veteran” Jatim”. Jurnal Rekayasa Perencanaan, Vol 4, Feb. 2008.
. SAVE International Value Standard (2007), “2007 edition. Value standard and Body of Knowledge.
. Suharto, I. (2014). Manajemen Proyek: Dari Konseptual Sampai Operasional. Cetakan kedua, Erlangga, Jakarta
. Sugiyono, (2014), Metode Penelitian kuantitatif, Kualitatif dan R&D.
Alfabeta, Bandung
. Suriana, C. (2014) Maximizing Construction
Project and Investment Budget Eficiency with value Engineering, Elex
Media Computindo, Jakarta.
. Swetha, S., Nalagoppula, R. S. dan Aleem, (2016). “Application of Value Engineering in Building Construction”, IJARSE, ISSN (p) 2319-8346, Vol. No. 5, Issue No. 10, Oktober 2016.
. Ward, J. & Peppard, J. (2002), Strategic Planning for Information System, (2nd ed.), John Wiley & Sons
. Zetha, H. dan Sesmiwati (2014), “Analisis Penerapan Metode Value Engineering pada Industri Konstruksi di Indonesia” Jurnal Teknik FTUP, Vol. No. 2 Juni.
. Zimmerman, P.E. dan Hart G. D. (1982), Value Engineering a Practical Approach for Owners, Designers and Contractors. Van Nostrand Reinhold Company, New York.
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
This work is also licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
