ANALISIS SIFAT FISIK DAN MEKANIK BATA BETON DI YOGYAKARTA
Keywords:
Bata Beton, Sifat Fisik, Sifat Mekanik, YogyakartaAbstract
Bata beton di Indonesia merupakan bahan material yang sudah lama dikenal dan banyak digunakan sebagai bahan bangunan. Bata beton terdiri dari dua jenis yaitu bata beton berlubang dan bata beton pejal. Di Indonesia khususnya wilayah Yogyakarta banyak sekali pabrik-pabrik pembuat bata beton, akan tetapi pada proses pembuatannya sering dijumpai masalah yaitu bata beton yang dibuat tidak diketahui memenuhi standar dan tidak. Penelitian ini dilakukan dengan mengambil 10 sampel dari 10 lokasi tempat diempat kabupaten di wilayah Yogyakarta. Pemeriksaan awal di lapangan meliputi pemeriksaan komposisi material yang digunakan, jenis material dan metode pembuatan. Pemeriksaan ke dua dilakukan meliputi pengujian sifat fisik yaitu menganalisa dimensi/ukuran, tekstur/bentuk, dan sifat mekanik yaitu pengujian densitas, penyerapan, kadar air, berat jenis dan Initial Rate of Suction (IRS), kuat tekan dan modulus elastisitas.Downloads
References
. SNI-03-0349, 1989, Bata Beton Untuk Pasangan Dinding, Badan Standar Nasional, Jakarta.
. Anonym, 1971, Peraturan Beton Bertulang Indonesia, (PBI-1971), Departemen Pekerjaan Umum.
. ASTM Standards, 2016, ASTM C134-95 Standard Test Method for Size, Dimensional Measurements and Bluk Density of Refractory Brick and Insulanting Firebrick, ASTM International, West Conshohocken, PA. DOI: 10.1520/C0134-95R16
. Nur, O. F., 2008, Analisis Sifat Fisis Dan Mekanis Batu Bata Berdasarkan Sumber Lokasi Dan Posisi Batu Bata Dalam Proses Pembakaran, Jurnal Rekayasa Sipil, Volume 4 No.2.
. SNI-03-6825, 2002, Metode Pengujian Kekuatan Tekan Mortar Semen Portland Untuk Pekerjaan Sipil, Badan Standar Nasional, Jakarta.
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
This work is also licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
