Perancangan Prototype Monitoring PH Dan Level Air Pada Proses Anodizing Dengan Menggunakan Fuzzy Logic
DOI:
https://doi.org/10.22441/jte.2024.v15i3.010Kata Kunci:
monitoring, level air dan pH, fuzzy logic, anodizingAbstrak
Abstrak—Anodizing aluminium adalah suatu tindakan pencegahan korosi pada aluminium dengan menggunakan metode elektrokimia untuk mengubah aluminium menjadi oksida aluminium (Al2O3) pada permukaan yang akan dilapisi. Proses anodizing sering terjadi pengurangan volume air yang cukup cepat karena proses pemanasan tangki, selama Berkurangnya volume cairan pada tangki dapat menyebabkan perubahan tingkat pH. Turunnya tingkat pH ini dapat mempengaruhi hasil coloring kurang menempel dan sealing tidak sempurna. Tujuan dari penelitian ini adalah merancang alat yang dapat memonitoring level air dan pH dengan menggunakan fuzzy logic berbasis arduino.penelitian ini dimulai dengan membuat sebuah prototipe yang terdiri dari sensor pH dan sensor ultrasonik yang berfungsi sebagai input. Buzzer , pompa motor dc, dan web data base yang berfungsi sebagai output. Hasil penelitian ini didapat dari percobaan yang dilakukan sebanyak 27 kali dengan jumlah 9 kondisi. Hasil percobaan menunjukkan bahwa sistem dapat berjalan dengan stabil. Lebih lanjut, terdapat eror pada penghitungan fuzzy yang relatif rendah. Hasil fuzzy yang didapatkan dari penghitungan matlab dan arduino memiliki nilai eror yang cukup kecil yaitu rata – rata buzzer 0.53 % dan pompa motor 0.08 %. Begitu juga pada perbandingan penghitungan antara matlab dengan manual tingkat nilai rata – rata eror cukup rendah yaitu rata – rata buzzer 2.17 % dan pompa motor 1.50 %.
Kata kunci : monitoring level air dan pH, fuzzy logic, anodizing.
Unduhan
Referensi
A. H. Kristianto, Pengaruh Variasi Konsentrasi 10-15% Larutan Asam Sulfat H2SO4 Pada Proses Anodizing Aluminium., Yogyakarta: Universitas Sanata Dharma,, 2017.
A. Sulistion, D. Arifianti dan A. Nilogiri, “Sistem Monitoring Suhu Dan Kelembaban Ruangan Server Berbasis Arduino Menggunakan Metode Fuzzy logic Dengan Buzzer Dan Telegram Bot Sebagai Notifikasi,” pp. 1-12, 2020.
Afandi dan M. Rofiq, “Analisa Pengaruh Variasi Tegangan Dan Waktu Pada Proses Anodizing Terhadap Tingkat Kilap Material Komposit Al -Abu Dasar Batu Bara,” skripsi, 2019.
B. Kusumo dan N. Azis, “rancang bangun alat penyiram sayuran hidroponik menggunakan arduino mega 2560,” Jurnal Media Informatika Budidarma, pp. 124-128, 2021.
D. Apriani, K. Munawar dan A. Setiawan, “Gateway, Alat Monitoring Pada Depo Air Minum Baru Cabang Nagrak Kota Tangerang Menggunakan Air Galon Berbasis SMS,” urnal Informatika, pp. 110-210, 2019.
D. R. Nanyanz, G. G. Ocen, T. Omara, F. Bwire, D. Matovu dan T. Semwogerere, “Design And Assembly Of A Domestic Water Temperature, Ph And Turbidity Monitoring System,” BMC Research Notes, 2021.
H. Mukminna, D. M. Putri dan A. N. Handayani, “Simulasi Kinerja Siswa Dengan Metode Fuzzy Inference Sugeno Menggunakan Aplikasi Matlab,” Jurnal Ilmiah Teknologi Informasi Asia, pp. 71-78, 2017.
Irwansyah dan A. A. Rahmansyah, “Prototype Sistem Monitoring dan Pengontrolan Level Tangki Air Berbasis SCADA,” Jurnal Tenologi Terapan, pp. 27-32, 2018.
J. . E. d. Costa dan A. W. R. Emanuel, “IOT design monitoring water tank study case: Instituto profissional de canossa (IPDC),” pp. 1-5., 2020.
J. M. Runge, The Metallurgy of Anodizing Aluminum: Connecting Science to Practice, Chicago: Springer, 2018, pp. 168 - 169.
L. W. Zahner, Aluminum Surfaces : A Guide To Alloys, Finish, Fabrication, And Maintenance In Artchitecture And Art, First edition penyunt., New Jersey: John Wiley and Sons.inc, 2019.
O. G. Martins, Arduino 101: A Technical Reference to Setup and Program 80 Arduino Zero, Nano, Due, Mega and Uno Projects, United states of america: Independently published, 2020.
Prabowo, Hernawan dan F. Arifin, “Pengembangan Media Pembelajaran,” Kendali Fuzzy Logic Berbasis Arduino Nano pada Mata Kuliah Praktik Sistem Kendali Cerdas, no. ELINVO, pp. 39 - 45, 2018.
R. . A. Nugroho, Rancang Bangun Prototype Penyaring Udara Ruangan Berbasis Arduino Dengan Metode Fuzzy, Semarang: Universitas Semarang, 2019.
S. U. Mariam, A. Ibrahim, Yuniati dan Nazirudin, “. Pengaruh Variasi Rapat Arus Hard Anodizing Terhadap Laju Korosi Pada Aluminium 6061,” Jurnal Mesin Sains Terapan, p. 99 – 105, 2020.
Z. Zainuddin, . R. Idris dan A. Azis, “Water Quality Monitoring System for Vannamae Shrimp Cultivation Based on Wireless Sensor Network In Taipa, Mappakasunggu District, Takalar,” pp. 89 - 92.
Unduhan
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
