Antena Susun Series Fed 1×8 untuk Aplikasi 5G di Frekuensi 28 GHz
DOI:
https://doi.org/10.22441/jte.2022.v13i2.005Keywords:
Antena mikrostrip, series fed array, 5G, 28 GHzAbstract
Abstrak— Telekomunikasi berperan penting terhadap pemenuhan kebutuhan hidup manusia. Salah satunya adalah tersedianya sarana komunikasi agar manusia bisa saling tukar informasi satu dengan lainnya meskipun manusia terpaut oleh jarak sangat jauh. Keberadaan manusia yang stasioner maupun dinamis menjadikan permintaan terhadap telekomunikasi berkembang secara cepat salah satunya adalah teknologi 5G. Kehadiran teknologi 5G menawarkan sebuah sistem telekomunikasi yang lebih maju dari teknologi sebelumnya. Sehingga untuk merealisasikan sitem tersebut, dibutuhkan perangkat-perangkat yang memadai salah satunya adalah antena. Antena adalah sebuah perangkat penting dalam realisasi 5G yang berfungsi untuk mengirimkan dan menerima sinyal informasi antar penggunanya. Penelitian ini menawarkan perancangan antena mikrostrip yang disusun 1×8 yang direalisasikan pada frekuensi 28 GHz untuk aplikasi 5G. Hasil pengukuran diperoleh nilai return loss sebesar -21,6251 dB VSWR sebesar 1,1809, impedansi sebesar 74,196 ꭥ, dan juga bandwidth sebesar 0,8579 GHz pada rentang frekuensi 27,4962 GHz – 28,3541 GHz.
Downloads
References
R. Zeqiri, F. Idrizi, and H. Halimi, “Comparison of Algorithms and Technologies 2G, 3G, 4G and 5G,” in 3rd International Symposium on Multidisciplinary Studies and Innovative Technologies, ISMSIT 2019, 2019, pp. 1–4.
M. U. Sheikh, K. Hiltunen, and J. Lempiainen, “Angular Wall Loss Model and Extended Building Penetration Model for Outdoor to Indoor Propagation,” in 2017 13th International Wireless Communications and Mobile Computing Conference, IWCMC 2017, 2017, pp. 1291–1296.
A. Turkmen et al., “Coverage Analysis for Indoor-Outdoor Coexistence for Millimetre-Wave Communication,” in 2019 UK/China Emerging Technologies, UCET 2019, 2019, pp. 2–5.
J. Rodriguez, Fundamentals of 5G Mobile Networks. 2015.
D. W. Astuti, A. Firdausi, and M. Alaydrus, “Multiband Double Layered Microstrip Antenna by Proximity Coupling for Wireless Applications,” in QiR 2017 - 2017 15th International Conference on Quality in Research (QiR): International Symposium on Electrical and Computer Engineering, 2017, vol. 2017-Decem, pp. 106–109.
D. W. Astuti, M. M. Putri, and D. Rusdiyanto, “Perancangan Antena Diplexing Menggunakan Metode Half Mode SIW dengan Metode Cavity Back Slot Sebagai Matching Impedansi,” J. Telekomun. dan Komput., vol. 11, no. 1, p. 1, 2021.
S. Sepryanto, S. Attamimi, and F. Sirait, “Perancangan Antena Mikrostrip Siw Cavity-Backed Modified Dumbell-Shaped Slot Untuk Pengaplikasian Pada 5G,” J. Teknol. Elektro, vol. 11, no. 2, pp. 115–119, 2020.
D. Rusdiyanto, D. W. Astuti, S. Alam, and Y. G. Adhiyoga, “Design of 2x2 Wide Bandwidth MIMO Antenna For LTE And 5G Sub-6GHz,” JITE ( J. Informatics Telecommun. Eng. ), vol. 5, no. January, pp. 225–237, 2022.
S. F. Jilani and A. Alomainy, “A Multiband Millimeter-Wave 2-D Array Based on Enhanced Franklin Antenna for 5G Wireless Systems,” IEEE Antennas Wirel. Propag. Lett., vol. 16, pp. 2983–2986, 2017.
Y. Rahayu and M. I. Hidayat, “Design of 28/38 GHz Dual-Band Triangular-Shaped Slot Microstrip Antenna Array for 5G Applications,” in 2018 2nd International Conference on Telematics and Future Generation Networks, TAFGEN 2018, 2018, pp. 93–97.
Z. Ahmed, P. McEvoy, and M. J. Ammann, “Comparison of Grid Array and Microstrip Patch Array Antennas at 28 GHz,” 2018 IEEE MTT-S Int. Microw. Work. Ser. 5G Hardw. Syst. Technol. IMWS-5G 2018, pp. 2018–2020, 2018.
Y. Pang, L. Sun, Z. Li, and R. Cao, “W Band Planar Series-Fed Antenna Array,” in 2019 IEEE 5th International Conference on Computer and Communications, ICCC 2019, 2019, pp. 676–679.
C. A. Balanis, Antenna theory; analysis and design, Third. John Wiley & Son, INC, 2005
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
