Perancangan Sistem Otomatisasi dan Monitoring Perangkat Perawatan Tanaman Hias Berbasis Internet of Things
DOI:
https://doi.org/10.22441/jte.2022.v13i2.007Keywords:
Blynk, ESP8266, Internet of Things, Perawatan tanaman, Smartphone,Abstract
Di Indonesia, trend merawat tanaman hias adalah salah satu hobi yang terus berulang setiap tahunnya dengan berbagai jenis tanaman yang berbeda – beda dan metode perawatan yang beragam sesuai dengan jenis tanaman. Sayangnya, padatnya rutinitas di perkotaan membuat tidak semua pemilik tanaman dapat selalu merawat tanaman mereka secara rutin, terkadang ada hal – hal yang membuat mereka tidak dapat selalu berada di dekat tanaman mereka sehingga tidak memungkinkan bagi mereka untuk merawat tanaman mereka sebagaimana mestinya. Untuk itu, perangkat perawatan tanaman hias berbasis internet of things (IoT) ini dibuat untuk menawarkan solusi bagi para pemilik tanaman hias untuk dapat merawat tanaman mereka secara otomatis dan dapat dipantau dari kejauhan. Pada perangkat ini, sensor digunakan untuk mengukur kelembaban tanah, suhu udara, kelembaban udara, dan intensitas cahaya yang terdapat di sekitar tanaman. Data yang diperoleh dari sensor akan dikirimkan dari ESP8266 ke smartphone pengguna untuk dapat ditampilkan pada sebuah aplikasi blynk. Selain itu, sistem ini juga memungkinkan pemilik tanaman untuk dapat menyesuaikan nilai variabel sensor yang terdapat pada perangkat untuk disesuaikan dengan jenis tanaman yang akan dilakukan perawatan melalui pengaturan yang terdapat pada aplikasi. Berdasarkan hasil pengujian, setiap sensor memiliki berbagai persentase kesalahan perhitungannya masing – masing, dengan rincian : kesalahan pembacaan sensor soil moisture sebesar 1,303%, kesalahan pembacaan sensor dht11 sebesar 1,56% untuk suhu udara dan 13% untuk kelembaban udara, dan kesalahan pembacaan sensor light dependent resistor sebesar 1,245%. Selain itu, aplikasi juga dapat menampilkan data yang di terima dari ketiga sensor yang terdapat pada perangkat.Downloads
References
E. Z. Kafiar, E. K. Allo, and D. J. Mamahit, “Rancang Bangun Penyiram Tanaman Berbasis Arduino Uno Menggunakan Sensor Kelembaban YL-39 dan YL-69,” Jurnal Teknik Elektro dan Komputer, vol. 7, no. 3, pp. 267–276, 2018.
N. H. Abd Rahim, F. N. Ahmad Zaki, A. S. M. Noor, “Smart App for Gardening Monitoring System using IoT Technology”, IJAST, vol. 29, no. 04, pp. 7375 -7384, Jun. 2020.
C. A. Gonzalez-Amarillo, J. C. Corrales-Munoz, M. A. Mendoza-Moreno, A. M. Gonzalez Amarillo, A. F. Hussein, N. Arunkumar, and G. Ramirez-Gonzalez, “An iot-based Traceability System for Greenhouse Seedling Crops,” IEEE Access, vol. 6, pp. 67528–67535, Oct. 2018. DOI : 10.1109/ACCESS.2018.2877293
A Balamurali, Sandeep P, R Siva Sandeep Reddy, R Sai Kiran, “Humidity and Temperature Monitoring System ”, IJCA, vol. 13, no. 4, pp. 63 - 69, May 2020.
J. M. S. Waworundeng, N. C. Suseno, and R. Y. Manaha, “Automatic Watering System for Plants with IoT Monitoring and Notification,” CogITo Smart Journal, vol. 4, no. 2, pp. 316–326, Dec. 2018. DOI: http://dx.doi.org/10.31154/cogito.v4i2.138.316-326
S. Sawidin, D. S. Pongoh, and A. Ramschie, “Rancang Bangun Sistem Kontrol Temperatur dan Kelembaban Ruangan Dengan Android,” in Proc. 9th Industrial Research Workshop and National Seminar, Bandung, Indonesia, 2018, pp. 258–267.
A. Arafat and I. Ibrahim, “Sistem Alat Monitoring Untuk Pengendali Suhu dan Kelembaban Greenhouse Berbasis Internet of Things,” Jurnal Keilmuan dan Aplikasi Teknik, vol. 21, no. 1, pp. 25–34, Jul. 2020. DOI: 10.20527/infotek.v21i1.8961
A. Minariyanto, M. Mardiono, and S. W. Lestari, “Perancangan Prototype Sistem Pengendali Otomatis Pada Greenhouse Untuk Tanaman Cabai Berbasis Arduino dan Internet of Things (IoT),” Jurnal Teknologi, vol. 7, no. 2, pp. 121–134, 2020. DOI : https://doi.org/10.31479/jtek.v7i2.50
W. A. Prayitno, A. Muttaqin, and D. Syauqy, “Sistem Monitoring Suhu, Kelembaban, dan Pengendali Penyiraman Tanaman Hidroponik Menggunakan Blynk Android,” Jurnal Pengembangan Teknologi Informasi dan Ilmu Komputer, vol. 1, no. 4, pp. 292–297, Apr. 2017.
A. Saputra, M. H. Ibnu Hajar, and A. R. Bahrain, “Sistem Kontrol Pada Hydroponics Grow Room Dengan Menggunakan Module Esp8266-01,” Jurnal Teknologi Elektro, vol. 10, no. 1, p. 16, Dec. 2019, doi: 10.22441/jte.v10i1.003.
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
