Rancang Bangun Prototipe Sistem Kontrol Terdistribusi untuk Pemantauan dan Pengendali Ketinggian Permukaan Air pada 5 Pintu Air Berbasis IoT (Internet of Things) menggunakan Socket.IO
DOI:
https://doi.org/10.22441/jte.2020.v11i3.008Kata Kunci:
IoT, Sistem Kontrol Terdisribusi, Kanal, SMTP Server, HR-SC04, MG90SAbstrak
Pemantauan tinggi permukaan air pada sungai merupakan salah satu tindakan untuk mengurangi terjadinya banjir akibat kelebihan debit air sungai dan ketinggiannya. Pengembangan sistem pemantauan permukaan air sungai telah banyak dilakukan. Namun, sistem tersebut tidak saling terhubung antar pintu air yang saling berhubungan. Maka dari itu penelitian ini bertujuan untuk mengembangkan Sistem tersebut dalam pengembangan teknologi IoT (Internet of Things) yaitu menggunakan workflow Socket sebagai sistem kontrol terdistribusi. Dengan adanya pengembangan pada sistem tersebut diharapkan memberikan informasi yang akurat dan tepat waktu (real-time) mengenai status dari ketinggian permukaan air yaitu Siaga I, Siaga II, Siaga III dan Normal. Dengan sistem yang terpusat (centralized Sistem) maka sistem ini dapat melakukan pemantauan dan pengkontrolan pintu air yang terintegrasi dalam suatu wilayah desa, kota, provinsi dan negara tertentu. Maka hasil pemantuan ketinggian permukaan air sungai pada 5 kanal diketahui memiliki respons 7.05ms dengan data berkapasitas 117B. Data yang diolah tersebut didistribusikan oleh server kesemua client yang terkoneksi didalam sistem dan mengirim notifikasi dengan Google SMTP Server. Sistem ini merekam semua data yang diambil dari sensor HC-SR04 secara real-time serta men-tigger untuk membuka pintu air (gate servo MG90S) dalam status tertentu sehingga disediakan sebuah dashboard untuk melakukan pemantauan dan pengendalian sistem terintegrasi pada pintu air.
Unduhan
Referensi
Y. Gunardi, A. Adriansyah and T. Anindhito. "Small Smart Community: An Application Of Internet Of Things". 2015. ISSN 1819-6608.
N. Witthayawiroj and P. Nilaphruek, “The Development of Smart Home Sistem for Controlling and Monitoring Energy Consumption using WebSocket Protocol”, 2017.
V. Karagiannis, P. Chatzimisios, F. Vazquez-Gallego and J. Alonso-Zarate, “A Survey on Application Layer Protocols for the Internet of Things Transaction on IoT and Cloud Computing”, 2015.
S. Dey, A. Roy and S. Das, “Home automation using Internet of Thing”, 2017
B. T. W. Utomo and H. Hasan. “Prototiping Sistem Monitoring Ketinggian Air Dan Pengendalian Pintu Air Pada Jaringan Irigasi Berbasis Microkontroler Atmega16 Dengan Menggunakan Short Message Service (Sms)”, V. 8, N. 1, P. 59-68, 2014. Issn 2580-8397
F. Rausan, B. P. Lapanporo and M. I. Jumarang, "Rancang Bangun Sistem Monitoring Ketinggian Permukaan Air Menggunakan Mikrokontroler ATMEGA328P Berbasis Web Service", vol.5, no.2., 2015
M. R. Alfatah and B. Hari, "Prototype Sistem Buka Tutup Otomatis Pada Pintu Air Bendungan Untuk Mengatur Ketinggian Air Berbasis Arduino", 2016 .
M .M. Khoir, “Rancang bangun alat monitoring pasang surut air laut berbasis internet of thing (IoT)”, 2018.
A. Adriansyah, S. Budiyanto, J. Andika, A. Romadlan, and N. Nurdin, “Public street lighting control and monitoring system using the internet of things,” AIP Conf. Proc., vol. 2217, no. April, 2020, doi: 10.1063/5.0000594
Unduhan
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
