Pengaruh Kelembapan dan Suhu Terhadap Tegangan Flashover Pada Isolator Transmisi Koto Panjang - Payakumbuh
DOI:
https://doi.org/10.22441/jte.2024.v15i1.002Kata Kunci:
Flashover, Isolator, Kelembapan, Polutan, SuhuAbstrak
Penelitian ini menganalisis pengaruh suhu dan kelembapan terhadap fenomena flashover pada isolator polutan lumut di Koto Panjang, Payakumbuh. Analisa perhitungan dilakukan dengan variasi suhu dan kelembapan yang berbeda berdasarkan hasil eksperimen pada isolator polutan lumut untuk mengamati terjadinya flashover. Hasil penelitian menunjukkan bahwa suhu dan kelembapan memiliki peran penting dalam mempengaruhi kemungkinan terjadinya flashover. Suhu yang tinggi dan kelembapan yang rendah cenderung meningkatkan risiko flashover pada isolator polutan lumut. Oleh karena itu, pemantauan kondisi suhu dan kelembapan di daerah tersebut penting untuk menjaga kinerja isolator polutan dan mencegah potensi gangguan listrik akibat flashover.
Unduhan
Referensi
M. Fauzan, F. R. Yanti, M. A. Azzahra, A. Ahmad, and Y. Warmi, “Investigasi Flashover Pada Saluran Transmisi 150 kV Payakumbuh – Koto Panjang,” pp. 177–184.
Y. Warmi, “Horn Length Estimation for Decrease of Tripout Rates on 150 kV Transmission Lines in West Sumatra in Indonesia,” pp. 1–6, 2018.
K. Warmi, Y. dan Michishita, “A Study on Lightning Outages on the 150 Kv Transmission Line of Payakumbuh – Koto Panjang in West Sumatra in Indonesia,” 19th Int. Symp. High Volt. Eng., vol. 23–28, 2015.
Y. Warmi and F. Ismail, “Perbaikan Desain Proteksi Petir Saluran Transmisi 150 kV Payakumbuh – Koto Panjang,” J. Tek. Elektro ITP, vol. 7, no. 1, pp. 1–6, 2018, doi: 10.21063/jte.2018.3133701.
Y. WARMI and K. FEBRIAN, “Analisis Variasi Ketebalan Coating Senyawa Glasir terhadap Daya Tahan Dielektrik Isolator Keramik Saluran Transmisi 150kV,” ELKOMIKA J. Tek. Energi Elektr. Tek. Telekomun. Tek.Elektron.,vol.9,no. 2, p. 249, 2021, doi: 10.26760/elkomika.v9i2.249.
Y. Warmi and K. Michishita, “Investigation of lightning tripouts on 150-kV transmission lines in West Sumatra in Indonesia,” IEEJ Trans. Electr. Electron. Eng., vol. 11, no. 5, pp. 671–673, 2016, doi: 10.1002/tee.22286.
Y. Warmi and K. Michishita, “Tower-Footing Resistance and Lightning Trip-outs of 150 kV Transmission Lines in West Sumatra in Indonesia,” vol. 01022, pp. 4–11, 2018.
A. Salem, R. Abd-Rahman, W. Ghanem, S. Al-Gailani, and S. Al-Ameri, “Prediction flashover voltage on polluted porcelain insulator using ANN,” 10.32604/cmc.2021.016988.
O. E. Gouda and A. Z. El Dein, “Laboratory simulation of naturally polluted highvoltage transmission line insulators,” IET Gener. Transm. Distrib., vol. 8, no. 2, pp. 321–327, 2014, doi: 10.1049/iet-gtd.2013.0405.
T. S. Adiwibowo, “Perancangan Proteksi Petir SUTET dengan Konsep Lightning Performance dan Kinerja Arrester,” Energi & Kelistrikan, vol. 11, no. 2, pp. 98–107, 2019, doi: 10.33322/energi.v11i2.769.
M. C. M. Barasa, L. S. Patras, and H. Tumaliang, “Analisis Kinerja Lightning Arrester Pada Jaringan Transmisi 150 Kv Sistem Minahasa Khususnya Pada Penyulang Kawangkoan - Lopana,” J. Tek. Elektro dan Komput., vol. 6, no. 1, pp. 7–14, 2017,
A. A. S. A. Dkk., “Flashover Voltage of Porcelain Insulator Under Various Pollution Distributions: Experiment and Modeling,” vol. Volume 208, 2022.
Anderson (1982) ‘EBook (EPRI 345kV and above Transmission_line_reference_book)’.
Unduhan
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
