Rancang Bangun Prototipe Emergency Locator Card Berbasis GPS dan Bluetooth Low Energy Untuk Operasi SAR Di Sungai
DOI:
https://doi.org/10.22441/jte.2026.v17i2.005Abstrak
Operasi pencarian dan pertolongan (Search and Rescue) pada korban hanyut di sungai memiliki tingkat resiko tinggi terhadap keselamatan personel serta membutuhkan sistem pelacakan lokasi yang cepat dan akurat. Penelitian ini bertujuan merancang dan membangun prototipe Emergency Locator Card berbasis GPS dan Bluetooth Low Energy sebagai perangkat pendukung keselamatan personel SAR. Sistem menggunakan Soil Moisture Sensor sebagai pemicu aktivasi otomatis saat perangkat terdeteksi dalam kondisi basah. Setelah aktif, modul GPS Neo-6M memperoleh koordinat lokasi dan modul GSM SIM800L mengirimkan informasi lokasi melalui jaringan seluler ke perangkat pengguna. Bluetooth dimanfaatkan sebagai pendukung pelacakan jarak dekat, sedangkan LED dan Buzzer berfungsi sebagai indikator visual dan audio. Seluruh proses dikendalikan oleh mikrokontroler ESP32. Pengujian dilakukan terhadap prototipe untuk mengevaluasi kinerja sistem. Hasil pengujian menunjukkan waktu respons deteksi sensor rata-rata ±1 detik. Pengujian akurasi GPS menghasilkan error jarak sebesar 6,3% terhadap titik sebenarnya. Waktu respons total sistem sejak aktivasi hingga seluruh indikator aktif adalah 11,51 detik. Sistem mampu beroperasi selama ±2 jam pada kondisi penuh dan indikator jarak dekat berfungsi dengan baik. Hasil penelitian menunjukkan bahwa prototipe memiliki potensi untuk dikembangkan sebagai perangkat pendukung operasi SAR di sungai.
Kata Kunci— SAR, Emergency Locator Card , ESP32, GPS Neo-6M, Bluetooth Low Energy.Unduhan
Referensi
Republik Indonesia, Undang-Undang Nomor 29 Tahun 2014 tentang Pencarian dan Pertolongan, 2014.
“Operasi pencarian dan pertolongan kondisi membahayakan manusia 1 orang personel terseret arus di Sungai Penetay Kabupaten Kerinci,” BASARNAS, n.d
N. A. Islamay Defry, “Rancang bangun alat pendeteksi barang yang hilang menggunakan smartphone berbasis Arduino Uno dengan GPS Ublox Neo-6M dan modul GSM SIM800L-V1,” Universitas Islam Negeri Maulana Malik Ibrahim Malang, 2024.
D. Chen, K. G. Shin, Y. Jiang, and K.H. Kim, “Locating and tracking BLE beacons with smartphones,” University of Michigan, Ann Arbor, 2017.
D. Andesta and R. Ferdian, “Sistem keamanan sepeda motor berbasis mikrokontroler dan modul GSM,” Journal of Information Technology and Computer Engineering, vol. 2, no. 2, pp. 51–63, 2018.
N. R. Yudhana, “Pelacakan lokasi sepeda motor menggunakan modul GPS Ublox Neo-6M dan GSM SIM800L,” Universitas Muhammadiyah Surakarta, 2019.
P. Kanakaraja, S. K. Kotamraju, S. Nadipalli, A. Kumar S. V., and K. Ch. S. Kavya, “IoT enabled BLE and LoRa based indoor localization without GPS,” Turkish Journal of Physiotherapy and Rehabilitation, 2021.
T. Pavan, S. Sowjany, V. Meghana, and S. K. Yaseen, “Tracking of dementia patients using GPS & LoRa WiFi,” Anil Neerukonda Institute of Technology and Sciences, 2020.
C. H. R., “Women security system using GPS tracker and safe jacket,” International Journal of Engineering Research & Technology, 2023.
S. E. Susanto, M. Julius, and E. Maulana, “Monitoring posisi operasi tim SAR-SRU (Search and Rescue Unit) pada daerah bencana dengan memanfaatkan GPS,” 2013.
A. U. Aakesh and Y. Rajasekaran, “Healthcare monitoring and tracking wristband for elderly people using ESP-32,” Institute of Science and Technology, 2023.
A. Sunardi, Riko, S. H. Wijaya, I. Hidayat, and P. N. Soerya, “Rancang bangun kunci pintu otomatis berbasis mikrokontroler Arduino menggunakan RFID dan SIM900 sebagai sistem keamanan,” Jurnal Teknik Industri, Sistem Informasi dan Teknik Informatika, vol. 3, no. 1, pp. 17–24, 2024.
C. Hernandez-Goya, R. Aguasca-Colomo, and C. Caballero-Gil, “BLE-based secure tracking system proposal,” 2023.
E. Gomez-Huaylla, L. Mejía-Cruz, and E. Paiva-Peredo, “Management and monitoring of lithium-ion battery recharge with ESP32,” International Journal of Power Electronics and Drive Systems, vol. 15, no. 3, pp. 1677–1686, 2024.
T. D. Karnataka, “Women security system using GPS tracker and safe jacket,” 2023.
S. Mahapatra, V. Kannan, S. Seshadri, V. Ravi, and S. Reka, “An IoT-based wristband for automatic people tracking, contact tracing and geofencing for COVID-19,” Sensors, vol. 22, no. 24, 2022.
H. Monitoring and T. Wristband, “Healthcare monitoring and tracking wristband,” 2023.
Unduhan
Diterbitkan
Cara Mengutip
Terbitan
Bagian
Lisensi
Hak Cipta (c) 2026 Jurnal Teknologi Elektro
Artikel ini berlisensi Creative Commons Attribution-NonCommercial 4.0 International License.
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
