ANALISIS UJI GETARAN PADA MESIN BOR DUDUK RYU RBD16
DOI:
https://doi.org/10.22441/jtm.v13i1.18726Keywords:
Getaran Mesin, Getaran Mesin Bor Duduk, ISO 2372Abstract
Analisis getaran pada mesin bor duduk untuk mengetahui berapa nilai getaran yang dihasilkan akibat adanya gerakan pada saat perlakuan berlangsung. Tujuan penelitian ini untuk menganalisis perilaku getaran pada mesin bor duduk. Penelitian ini adalah penelitian exsperimen dengan dilakukan sebanyak 3 kali percobaan dengan masing-masing waktu 30 detik pada dua bagian yakni meja dan dudukan bawah bor. Spesimen dalam perobaan ini berjumlah satu yakni baja karbon rendah. Data penelitian ini diperoleh dari pengukuran getaran dengan menggunakan Vibration Meter GM63A yang diukur pada bagian tengah/tempat penempatan baja serta bagian bawah yakni dudukan mesin bor. Dari data dianalisis pengaruh dari putaran mata pahat bor serta pemberian tekanan oleh tangan saat memutar akan menyebabkan kenaikan dan penurunan getaran yang terukur pada vibscaner. Hasil pengujian getaran menunjukkan : bagian tengah (1) untuk 30 detik pertama dengan hasil 02.9 mm/s2, 30 detik kedua 02.6 mm/s2, 30 detik ketiga 02.7 mm/s2. Dan bagian dudukan bawah bor (2) untuk 30 detik pertama dengan hasil 03.4 mm/s2, 30 detik kedua 03.4 mm/s2, dan 30 detik ketiga 03.5 mm/s2 dengan rata-rata untuk bagian 1 yakni 02.7 mm/s2 dan bagian 2 dengan rata-rata 03.4 mm/s2.
Downloads
References
M. Mini, “PERENCANAAN MESIN BOR MEJA SKALA PRAKTIKUM,” J. Tek. MESIN, 2016, [Online]. Available: http://ojs.ustj.ac.id/mesin/article/view/329.
M. Bor, “PENGARUH VARIASI PUTARAN MESIN TERHADAP WAKTU PENGEBORAN DENGAN MATERIAL ALUMINIUM AL 6063 PADA MESIN BOR DUDUK,” media.neliti.com, [Online]. Available: https://media.neliti.com/media/publications/516145-none-8f5463dd.pdf.
D. S. Wijayanto and Y. Estriyanto, “Teknologi Mekanik Mesin Perkakas,” Surakarta UNS Press. Glosarium, 2005.
J. Holder and M. Lee, Environmental protection, law and policy: Text and materials. books.google.com, 2007.
R. Gianoglio, F. Salvatore, and J. Weber, “Method and device for damping the displacement of construction machines,” US Pat. 7,756,622, 2010, [Online]. Available: https://patents.google.com/patent/US7756622B2/en.
N. Endriatno, “Analisis getaran akibat massa yang tidak seimbang pada motor yang berputar,” Din. J. Ilm. Tek. Mesin, 2021, [Online]. Available: https://www.researchgate.net/profile/Nanang-Endriatno/publication/364294309_ANALISIS_GETARAN_AKIBAT_MASSA_YANG_TIDAK_SEIMBANG_PADA_MOTOR_YANG_BERPUTAR/links/634401e676e39959d6b3204a/ANALISIS-GETARAN-AKIBAT-MASSA-YANG-TIDAK-SEIMBANG-PADA-MOTOR-YANG-BERPUTAR.pdf.
A. ASRIN, “METODE PENELITIAN EKSPERIMEN: METODE PENELITIAN EKSPERIMEN,” … J. Educ. Humanit. Soc. …, 2022, [Online]. Available: https://journal.mukhlisina.id/index.php/maqasiduna/article/view/24.
L. I. Nasional, Teknik Pengukuran Getaran. Bandung, 1982.
Downloads
Published
How to Cite
Issue
Section
License
The copyright to this article is transferred to Universitas Mercu Buana (UMB) if and when the article is accepted for publication. The undersigned hereby transfers any and all rights in and to the paper including without limitation all copyrights to UMB. The undersigned hereby represents and warrants that the paper is original and that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to make and execute this assignment.
We declare that:
1. This paper has not been published in the same form elsewhere.
2. It will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. A copyright permission is obtained for materials published elsewhere and which require this permission for reproduction.
Furthermore, I/We hereby transfer the unlimited rights of publication of the above mentioned paper in whole to UMB. The copyright transfer covers the exclusive right to reproduce and distribute the article, including reprints, translations, photographic reproductions, microform, electronic form (offline, online) or any other reproductions of similar nature.
The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all co-authors. This agreement is to be signed by at least one of the authors who have obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
Retained Rights/Terms and Conditions
1. Authors retain all proprietary rights in any process, procedure, or article of manufacture described in the Work.
2. Authors may reproduce or authorize others to reproduce the Work or derivative works for the authors personal use or for company use, provided that the source and the UMB copyright notice are indicated, the copies are not used in any way that implies UMB endorsement of a product or service of any employer, and the copies themselves are not offered for sale.
3. Although authors are permitted to re-use all or portions of the Work in other works, this does not include granting third-party requests for reprinting, republishing, or other types of re-use.
This work is also licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
