Comparison Analysis of Quality of Ax-7 Advance Shelling Lubricants and Pertamina Enduro Racing Lubricants on Kawasaki Ninja 250cc Injeksi Motor

Theo Agytha Putra

Abstract


Abstract - An analysis of the degradation of the quality of lubricating oil in motorized vehicles has been carried out. In this study 4tak motorcycles were used, namely the 2016 Kawasaki Ninja 250cc Injection motorbike with two different lubricants and lubricants used, namely the Ax 7 and Enduro racing Shell Advance with SAE 10W40. Parameters that will be analyzed are viscosity, Water content, Wear metal and a reduction in TBN value with the lab testing method in addition to lubricant testing and also testing the performance of the engine using both of these oils using a dyno test and for fuel consumption testing using a road test. Testing the value of viscosity, water content, wear metal and decreasing the value of TBN. Lab tests were conducted to determine the value of viscosity, contamination of water, wear on the vehicle engine and a decrease in the value of TBN by taking samples of oil that has been used for about 2000 km, this lab test aims to predict the cleanliness of the combustion chamber, contamination of water and view equipmen which wear occurs so that it can prevent more fatal damage. From the three tests, it was found that using Shell Advance Ax 7 oil was better than using Enduro Racing oil.

Keywords


Lubricants, Shell, Enduro, Kawasaki, Injection.

Full Text:

PDF

References


Ardiyanto Oki, (2013) The Importance of Lubrication in the Machine. Yogyakarta. Adicita Karya Nusa.

Darmansyah Kiki, (2011) Impact of Wear on Machines. Bandung. Brillian Media Utama.

Darmanto, (2011) Machine Elements That Require Lubrication. Surabaya: Ten November Institute of Technology.

Doloksaribu Gimbal, (2014) Fuels and Lubricants. Yogyakarta. Andi publisher.

Haidar Farras. (2012). Engine Lubricants For Vehicle Fuel Savers. Solo. Intermedia Era.

Hidayat, Wahyu. 2012. Modern Gasoline Motors. Rineka Cipta. Jakarta. Limantoro, Setiawan and Felisia, Puspitaningsih. 2012. Determination of Relative Viscosity (Stormer method). Journal of Viscosity.

Krisna Eri, (2011) Various types of lubricants. Padang. Anggrek Media.

Rahardiyan Mohammad Tri, (2013) Lubrication Systems on Machines. Surabaya. Angkasa Multi Karya.

Utomo Jati, (2013) Machine Performance Testing on Motor Vehicles. Semarang. Aridas Karya Satria.

Yulianda, Ari, Hasan Maksum, Donny Fernandez, (2015) Influence the Use of Various Lubricant Brands on Four Step Motorcycle Engines. Padang. Padang State University.

Yuwono, Triwibowo. 1991. Macromolecules and molecular interactions. Erlangga. Jakarta.




DOI: http://dx.doi.org/10.22441/jtm.v7i3.4033

Refbacks

  • There are currently no refbacks.


Copyright (c) 2019 Jurnal Teknik Mesin

Jurnal Teknik Mesin (JTM)
Program Studi Teknik Mesin, Fakultas Teknik, Universitas Mercu Buana
Jl. Meruya Selatan No. 01, Kembangan, Jakarta Barat 11650, Indonesia
Email: [email protected]
Telp.: 021-5840815/ 021-5840816 (Hunting)
Fax.: 021-5871335

JTM is indexed by the following abstracting and indexing services:

 

 

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

View My Stats