Pengaruh Modifikasi Pipa Masukan Bahan Bakar Oli Bekas Berbentuk Spiral Terhadap Performansi Burner Tornado Api

abdul Gafur

Abstract


The need for fuel in Indonesia is a serious problem in human life in the future. Various efforts are being made to find alternative fuels. One that is currently being researched as an alternative fuel is lubricating oil (oil). Several studies have been carried out in the context of developing this used fuel oil. Used oil when using the standard burner used in previous studies has an impact on the amount of smoke and low temperature, because the oil that goes to the burner is still pure oil. This research tries to modify the oil input flow in the form of a circular spiral. The difference between the burners that will be made with previous studies is in the oil intake hose. The oil inlet pipe in this study will be made in a spiral shape. The results showed that the modification using a spiral pipe had a higher temperature of 397 0C compared to without using a spiral pipe which was 381 0C. In addition, the heating rate using this spiral pipe is greater, namely 302400 Joules. So it can be concluded that the burner performance with spiral pipe modification is higher than without using spiral pipe

Keywords


Oil used, Spiral pipe, Burner, performance

References


Purba Jhonas. (2017) “Perancangan boiler pipa api untu perebusan bubur kedelai pada industri tahu kapasitas uap jenuh 160 kg/jam”. Program studi teknik mesin, Universitas Pasir Pengaraian

Komariah lely nurul,Winda dwi julani dan Moch Farid Dimayati.(2013) “Efek pemanasan campuran biodiesel dan minyak solar terhadap konsumsi bahan bakar pada boiler”. Jurnal teknik kimia No.4, Vol 19 Desember 2013. Universitas Sriwijaya

Sudarman, suwahyu, dan sunyoto.(2015) “Penerapan ketel uap pada industri pengolahan tahu untuk meningkatkan efisiensi dan kualitas produk”. Vol 13 No.1, Juli 2015. Jurusan teknik mesin, Universitas Negeri Semarang

Istana Budi, Abrar Ridwan, dan Ade Rilnanda.(2017) “Optimasi tungu eleburan alumunium kapasitas 10 kg berbahan bakar oli beka skala laboratorium”. Jurnal photon Vol 8 No.1,Oktober 2017. Jurusan teknik mesin Universitas Muhammadiyah Riau.

Hamsah ago nur.(2017) “Analisa efisieni water tube boiler berbahan bakar baggase dan sekam di pabrik gula dengan kapasitas 45 ton/jam”. Jurusan teknik Mesin, Universitas Nusantara PGRI Kediri. 2017.

Hasbi Muh, Lili Laome, Prinob Askar, dan Ld.Asman darsono.(2019) “Pemanfaatan minyak oli bekas sebagai bahan bakar alternatif”. Prosiding ISBN:978-602-51407-1-6 2019.Universita Halu Oleo

Hernady Dedy, Lukas Septian, dan Bachtiar Chandra. (2019) “Perancangan, Pembuatan, dan Pengujian Burner Dengan Bahan Bakar Oli Bekas Dan Minyak Jelantah. Jurusan Teknik Mesin , Fakultas Teknologi Nasional Itenas Bandung




DOI: http://dx.doi.org/10.22441/jtm.v9i3.9735

Refbacks

  • There are currently no refbacks.


Copyright (c) 2020 Jurnal Teknik Mesin

Jurnal Teknik Mesin (JTM)
Program Studi Teknik Mesin, Fakultas Teknik, Universitas Mercu Buana
Jl. Meruya Selatan No. 01, Kembangan, Jakarta Barat 11650, Indonesia
Email: [email protected]
Telp.: 021-5840815/ 021-5840816 (Hunting)
Fax.: 021-5871335

JTM is indexed by the following abstracting and indexing services:

 

 

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

View My Stats