Vol 14, No 1 (2025)

Table of Contents

Articles

Design and Construction of a Pineapple Skin Cutting Machine with a Pneumatic Actuator Drive Powered by a Solar Module with a Capacity of 200 WP
10.22441/jtm.v14i1.25515
Rafil Arizona, Shandy Kurniadi
PDF
1-9
Design Analysis of a Disabled Tricycle Electric Bike Frame Using Finite Element Analysis (Fea)
10.22441/jtm.v14i1.31483
Hidayat Pratama, Fuad Hilmy, Raka Mahendra Sulistiyo, Xander Salahudin
PDF
10-19
Review of Improving Refrigeration Machine Performance by Adding Nanoparticles to the Refrigeration System Using Computational Fluid Dynamics (CFD) Simulation and Comparing it with Experimental Results
10.22441/jtm.v14i1.18371
Dandi Irwansyah
PDF
20-26
Evaluation of the Effectiveness of Sewage Treatment Plant Performance in GKM Green Tower Building
10.22441/jtm.v14i1.18734
Aldera Aji Maha Rendra
PDF
27-34
Design and Development of Flow Loss Testing Device in Pipe Installation Using VDI 2221 Method
10.22441/jtm.v14i1.19066
Rifky Dwi Ardian, Muhamad Fitri
PDF
35-44
Analysis of Variation in Fiber Volume Fraction on Torsional Strength of Epoxy and Polyester Matrix Coconut Fiber Composites
10.22441/jtm.v14i1.20828
Rendy Pangestu
PDF
45-51
Optimization of Working Temperature and Determination of Dross Recycle Soldering Machine Control Type Based on Specific Energy Consumption
10.22441/jtm.v14i1.18839
Ridho Muhamad Farhan, Ignatius Agung Wibowo
PDF
52-57
Exergy Analysis of Power Plants That Utilize Waste Heat from Cement Plants in West Sumatera
10.22441/jtm.v14i1.15307
Nadry Heroza, Adjar Pratoto
PDF
58-65
Machinability Analysis of SUH 35 Material Subjected to Annealing Process on Engine Valve Making Surface Grinding
10.22441/jtm.v14i1.14864
Sulaiman Arief, Muhamad Fitri
PDF
66-73
Design and Analysis of Cast Wheel Types Mt and Wm with Spoke Variations Using Aluminum Alloy Materials Type 7050-T7651 and 7075-T6 (Sn)
10.22441/jtm.v14i1.15139
Muhammad Sobirin, Ardhi Fathonisyam P.N, Mokh. Hairul Bahri
PDF
74-82