Analisis Perampingan Beban Kerja pada Bagian Packaging Material dengan Metode Workload Analysis

Andri Yanto, Uly Amrina

Abstract


This research is based on the results of observations of working time in the Packaging Materials (PM) section of a nutritional beverage company which indicates idle time has a negative impact on company productivity. The research objective is to calculate and streamline the workload with the optimal number of workers in the PM section. The research method used is time and motion study with work load analysis based on lean concepts. A total of 30 samples were taken using simple random sampling method. Data were analyzed using a descriptive workload analysis method. The results showed that the existing workload of PM feeder operators had a workload of 82.92%, assistant feeder PM operators had a workload of 60.16%, and RMPM driver operators had a workload of 57.27%. In addition, the optimal number of workers in the packaging material preparation process is 2 people. Finally, improvements are proposed using a lean concept approach in allocating main and additional work elements to operators in the packaging material preparation process.


Keywords


Productivity; Workload; Optimal; Lean

Full Text:

PDF

References


Sutalaksana, I. Z. (2006). Teknik Perancangan Sistem Kerja. Bandung: ITB Bandung.

Afiani, R., & Pujotomo, D. (2017). Penentuan Waktu Baku dengan Metode Stopwatch Time Study Studi Kasus CV. MANS Group. Industrial Engineering Online Journal, 6(1).

Anisa, H. N., & Prastawa, H. (2019). Analisis beban kerja pegawai dengan metode full time equivalent (FTE)(studi kasus pada PT. PLN (persero) distribusi jateng dan DIY). Industrial Engineering Online Journal, 7(4).

Arief, I., & Amrina, U. (2022). Penyeimbangan Lintasan Produksi dengan Metode Heuristic Ranked Positional Weight dan Large Candidate Rule pada Lini Perakitan Printer. Go-Integratif : Jurnal Teknik Sistem Dan Industri, 3(02), 74–86. https://doi.org/10.35261/gijtsi.v3i02.6860

Arif, R. (2014). Analisa Beban Kerja dan Jumlah Tenaga Kerja Yang Optimal Pada Bagian Produksi Dengan Pendekatan Metode Work Load Analysis (Studi Kasus: PT. Surabaya Perdana Rotopack). Jawa Timur: Jurnal Teknik Industri Universitas Pembangunan Nasional “Veteran.

Budaya, P. W., & Muhsin, A. (2018). Workload analysis in quality control department. Opsi, 11(2), 134–140.

Dharmawansyah, I. (2014). Analisis Kapasitas Laboratorium Cut Measurement Dengan Menggunakan Studi Waktu Di PT. Gajah Tunggal, Tbk. Jurnal PASTI Volume VIII No 3, 423 – 435, VIII(3), 423–435.

Farhana, D. H. (2020). Analisis Beban Kerja Dalam Menentukan Jumlah Tenaga Kerja Optimal dengan Metode Workload Analysis di PT Jaya Teknik Indonesia. 1(2), 18–22.

Farida Ariani, Khawarita Siregar, T. (2019). Determination of Total Labor Plant 1 using Workload Analysis ( WLA ) Method In Compound Fertilizer ’ s Industry Determination of Total Labor Plant 1 using Workload Analysis ( WLA ) Method In Compound Fertilizer ’ s Industry. IOP Conference Series: Materials Science and Engineering PAPER, 1–10. https://doi.org/10.1088/1757-899X/648/1/012015

Gaspersz, V., & Avanti, F. (2011). Lean Six Sigma for Manufacturing and Service Industries. Vinchristo Publisher Publication.

Haqqi, H., & Wijayati, H. (2019). Revolusi industri 4.0 di tengah society 5.0: sebuah integrasi ruang, terobosan teknologi, dan transformasi kehidupan di era disruptif. Anak Hebat Indonesia.

Irawan, A., & Leksono, E. B. (2021). Analisis Beban Kerja pada Departemen Quality Control. Jurnal INTECH Teknik Industri Universitas Serang Raya, 7(1), 1–6. https://doi.org/10.30656/intech.v7i1.2537

Isach, R. A. (2020). Evaluasi Beban Kerja Teknisi Mesin, Teknisi MTP dan Admin Departemen Injection Molding Pada PT X. Jurnal Titra, 8(1), 61–66. http://publication.petra.ac.id/index.php/teknik-industri/article/view/9859

Kurniawan, H., & Karmelia Shaura, R. (2022). Enrichment: Journal of Management Workload Analysis Using the Full Time Equivalent (FTE) Method to Optimizing Labor. Enrichment: Journal of Management, 12(4).

Notoatmodjo, S. (2005). Metodologi penelitian kesehatan.

Prima, A. A., & Izzati, T. (2018). Analisis Beban Kerja Terhadap Tenaga Kerja Analis Kimia Dengan Metode Full Time Equivalent Di Divisi Technology Development Departemen R&D-Analytical Development PT XYZ. Jurnal PASTI Volume XII No. 2, 154 - 168, 12(2), 154–168.

Rinawati, D. I., Sari, D. P., W.P., S. N., Muljadi, F., & Lestari, S. P. (2013). Pengelolaan Produksi Menggunakan Pendekatan Lean and Green Untuk Menuju Industri Batik Yang Berkelanjutan (Studi Kasus Di Ukm Batik Puspa Kencana). J@Ti Undip : Jurnal Teknik Industri, 8(1), 43–50. https://doi.org/10.12777/jati.8.1.43-50

Rolos, J. K. R., Sambul, S. A. P., Rumawas, W., Studi, P., Bisnis, A., & Administrasi, J. I. (2018). Pengaruh Beban Kerja Terhadap Kinerja Karyawan Pada PT. Asuransi Jiwasraya Cabang Manado Kota. Jurnal Administrasi Bisnis, 6(4), 19–27.

Saefullah, E., Listiawati, & Amalia, N. A. (2017). Pengaruh Beban Kerja Dan Stres Kerja Terhadap Produktivitas Kerja Di PT.Venia Agape Indonesia. Akademika Journal, 15(2).

Sari, S., Imron, F. F., Nurfajriah, N., & Rahayu I.M, F. (2022). Workload Analysis with Full Time Equivalent Method to Optimize Production Unit Performance at PT X. Journal of Integrated System, 5(2), 173–183. https://doi.org/10.28932/jis.v5i2.5404

Sobariansyah Putra, Fourry Handoko, S. H. (2020). Analisis Beban Kerja Menggunakan Metode Workload Analysis Dalam Penentuan Jumlah Tenaga Kerja Yang Optimal Di CV. Jaya Perkasa Teknik, Kota Pasuruan. 3(2), 3–6.

Sugiyono, S. (2017). Metode Penelitian Kuantitatif, Kualitatif, dan R&D. Bandung: Alfabeta, CV. Alfabeta, CV.

Sutopo, A., Arthati, D. F., & Rahmi, U. A. (2014). Kajian Indikator Sustainable Development Goals ( SDGs ). In Kajian Indikator Lintas Sektor (pp. 1–162).

Wigjosoebroto, S. (2003). Ergonomi studi gerak dan waktu.

Womack, J. P., Jones, D. T., & Roos, D. (1990). The machine that changed the world. Rawson Associates. New York, 323(1), 273–287.




DOI: http://dx.doi.org/10.22441/MBCIE.2023.017

Refbacks

  • There are currently no refbacks.


Copyright (c) 2023 Proceeding Mercu Buana Conference on Industrial Engineering

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Journal ISSN:

Portal ISSNe-ISSN
2988-4284

Tim Editorial Office
Proceeding Mercu Buana Conference on Industrial Engineering

Program Studi Magister Teknik Industri Universitas Mercu Buana
Jl. Raya Meruya Selatan No. 1 Kembangan Jakarta Barat
Email: [[email protected]]
Website: https://publikasi.mercubuana.ac.id/index.php/mbcie/

The Journal is Indexed and Journal List Title by:

 

 

in Collaboration with: